Tor wasn't actually working for me to connect to anything, but it worked
for 'ssh -D' testing.
Note that the resulting 'netaddr' is a bit weird, but I guess it's honest.
$ ./cli/lightning-cli connect 021f2cbffc4045ca2d70678ecf8ed75e488290874c9da38074f6d378248337062b
{
"id": "021f2cbffc4045ca2d70678ecf8ed75e488290874c9da38074f6d378248337062b"
}
$ ./cli/lightning-cli listpeers
{
"peers": [
{
"state": "GOSSIPING",
"id": "021f2cbffc4045ca2d70678ecf8ed75e488290874c9da38074f6d378248337062b",
"netaddr": [
"ln1qg0je0lugpzu5ttsv78vlrkhteyg9yy8fjw68qr57mfhsfyrxurzkq522ah.lseed.bitcoinstats.com:9735"
],
"connected": true,
"owner": "lightning_gossipd"
}
]
}
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is useful for the next patch, where we want to hand the unresolved
name through to the proxy.
This also addresses @Saibato's worry that we still called getaddrinfo()
(with the AI_NUMERICHOST option) even if we didn't want a lookup.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This means it will effect connect commands too (though it's too
late to stop DNS lookups caused by commandline options).
We also warn that this is one case where we allow forcing through Tor
without a proxy set: it just means all connections will fail.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This takes the Tor service address in the same option, rather than using
a separate one. Gossipd now digests this like any other type.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
For the moment, this is a straight handing of current parameters through
from master to the gossip daemon. Next we'll change that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Currently it's always for messages to peer: make that status_peer_io and
add a new status_io for other IO.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Risks leakage. We could do lookup via the proxy, but that's a TODO.
There's only one occurance of getaddrinfo (and no gethostbyname), so
we add a flag to the callers.
Note: the use of --always-use-proxy suppresses *all* DNS lookups, even
those from connect commands and the command line.
FIXME: An implicit setting of use_proxy_always is done in gossipd if it
determines that we are announcing nothing but Tor addresses, but that
does *not* suppress 'connect'.
This is fixed in a later patch.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And use it in wireaddr.
We fix up the double '.onion' in the test case, which seems like an error?
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is simply the code to set up the automatic hidden service, so move
it into lightningd.
I removed the undefined parse_tor_wireaddr, and added a parameter name
to the create_tor_hidden_service_conn() declaration for update-mocks.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
All gossipd needs from common/tor is do_we_use_tor_addr(), so move
that and the rest of the tor-specific handshake code into gossip/tor.c
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a rebased and combined patch for Tor support. It is extensively
reworked in the following patches, but the basis remains Saibato's work,
so it seemed fairest to begin with this.
Minor changes:
1. Use --announce-addr instead of --tor-external.
2. I also reverted some whitespace and unrelated changes from the patch.
3. Removed unnecessary ';' after } in functions.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
on all platforms;
because of that BUILD_ASSERT was failing on macOS.
(on macOS "sizeof(sun->sun_path) == 104" and
"sizeof(addr->u.sockname) == 108")
[ Linux man page says it can be as small as 92, so let's use the real value.
I also cleaned up the incorrect comment order on that struct! --RR ]
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Someone could try to announce an internal address, and we might probe
it.
This breaks tests, so we add '--dev-allow-localhost' for our tests, so
we don't eliminate that one. Of course, now we need to skip some more
tests in non-developer mode.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If we're given a wildcard address, we can't announce it like that: we need
to try to turn it into a real address (using guess_address). Then we
use that address. As a side-effect of this cleanup, we only announce
*any* '--addr' if it's routable.
This fix means that our tests have to force '--announce-addr' because
otherwise localhost isn't routable.
This means that gossipd really controls the addresses now, and breaks
them into two arrays: what we bind to, and what we announce. That is
now what we return to the master for json_getinfo(), which prints them
as 'bindings' and 'addresses' respectively.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. Add special option where an empty host means 'wildcard for IPv4 and/or IPv6'
which means ':1234' can be used to set only the portnum.
2. Only add this protocol wildcard if --autolisten=1 (default)
and no other addresses specified.
3. Pass it down to gossipd, so it can handle errors correctly: in most cases,
it's fatal not to be able to bind to a port, but for this case, it's OK
if we can only bind to one of IPv4/v6 (fatal iff neither).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This was something @icota implemented, but it fits logically into this
cleanup series. We create a new type which is the internal generalization
of a wireaddr (which is defined by the spec), and add a case here for
a socket name.
Based-on-the-true-story-by: @icota
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's become clear that our network options are insufficient, with the coming
addition of Tor and unix domain support.
Currently:
1. We always bind to local IPv4 and IPv6 sockets, unless --port=0, --offline,
or any address is specified explicitly. If they're routable, we announce.
2. --addr is used to announce, but not to control binding.
After this change:
1. --port is deprecated.
2. --addr controls what we bind to and announce.
3. --bind-addr/--announce-addr can be used to control one and not the other.
4. Unless --autolisten=0, we add local IPv4 & IPv6 port 9735 (and announce if they are routable).
5. --offline still overrides listening (though announcing is still the same).
This means we can bind to as many ports/interfaces as we want, and for
special effects we can announce different things (eg. we're sitting
behind a port forward or a proxy).
What remains to implement is semi-automatic binding: we should be able
to say '--addr=0.0.0.0:9999' and have the address resolve at bind
time, or even '--addr=0.0.0.0:0' and have the port autoresolve too
(you could determine what it was from 'lightning-cli getinfo'.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
No new functionality, just a continuation of my work toward completing #665.
I removed the common members of `struct withdrawal` and `struct fund_channel`
and placed them in a new `struct wallet_tx`. Then it was fairly straightforward
to reimplement the existing code in terms of `wallet_tx`.
Since I made some structural changes I wanted to get this approved before I
go any farther.
Added 'all' to fundchannel help message.
This means that openingd and closingd now forward our gossip. But the real
reason we want to do this is that it gives an easy way for gossipd to kill
any active daemon, by closing its fd: previously closingd and openingd didn't
read the fd, so tended not to notice.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(This was sitting in my gossip-enchancement patch queue, but it simplifies
this set too, so I moved it here).
In 94711969f we added an explicit gossip_index so when gossipd gets
peers back from other daemons, it knows what gossip it has sent (since
gossipd can send gossip after the other daemon is already complete).
This solution is insufficient for the more general case where gossipd
wants to send other messages reliably, so replace it with the other
solution: have gossipd drain the "gossip fd" which the daemon returns.
This turns out to be quite simple, and is probably how I should have
done it originally :(
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
These were so far only used for bolt11 construction, but we'll need them for the
DNS seed as well, so here we just pull them out into their own unit and prefix
them.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Just a small cleanup of the indentation code, so we don't have to reformat all
the issue reports to become readable. This is much closer to what `jq` or
`json_pp` spit out and doesn't have those infinitely long lines.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We can have more than one; eg we might offer both bech32 and a p2sh
address, and in future we might offer v1 segwit, etc.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is probably covered by our "channel capacity" heuristic which
requires the channel be significant, but best to be explicit and sure.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In particular, the main daemon and subdaemons share the backtrace code,
with hooks for logging.
The daemon hook inserts the io_poll override, which means we no longer
need io_debug.[ch]. Though most daemons don't need it, they still link
against ccan/io, so it's harmess (suggested by @ZmnSCPxj).
This was tested manually to make sure we get backtraces still.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I didn't convert all tests: they can still use a standalone context.
It's just marginally more efficient to share the libwally one for all
our daemons which link against it anyway.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The overflow check `mul_overflows_s64(int64_t, int64_t)` overflows.
Since this is an signed integer overflow this triggers UB, which
in turn means that we cannot trust the check.
Luckily mul_overflows_s64(int64_t, int64_t) is unused. Removing it.
We don't handle \u, since we assume everyone sane is using UTF-8. We'd
still have to reject '\u0000' and maybe other weird cases if we did.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If we're going to simply take() a pointer, don't allocate it off a random
object. Using NULL makes our intent clear, particularly with allocating
packets we're going to take() onto a queue.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I did a brief audit of tmpctx uses, and we do leak them in various
corner cases. Fortunely, all our daemons are based on some kind of
I/O loop, so it's fairly easy to clean a global tmpctx at that point.
This makes things a bit neater, and slightly more efficient, but also
clearer: I avoided creating a tmpctx in a few places because I didn't
want to add another allocation. With that penalty removed, I can use
it more freely and hopefully write clearer code.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Now it just returns true if it queued something. This allows it
to queue multiple packets, and lets it share code paths with other code
in future patches.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As we add more features, the current code is insufficient.
1. Keep an array of single feature bits, for easy switching on and off.
2. Create feature_offered() which checks for both compulsory and optional
variants.
3. Invert requires_unsupported_features() and unsupported_features()
which tend to be double-negative, all_supported_features() and
features_supported().
4. Move single feature definition from wire/peer_wire.h to common/features.h.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We didn't get the entire thing in the parent when gossipd crashed: stderr
is suitable for these I think.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Looking at an example log from #968, 288612 of 289244 lines were simply
channeld logging incoming and outgoing gossip.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We always hand in "NULL" (which means use tal_len on the msg), except
for two places which do that manually for no good reason.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Because peer_failed would previously drop the connection, we had a
special 'negotiation_failed' message which made the master hand it
back to gossipd. We don't need that any more.
This also meant we no longer need a special hook in read_peer_msg
for openingd to send this message.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Several daemons (onchaind, hsm) want to use the status messages, but
don't communicate with peers. The coming changes made them drag in
more code they didn't need, so instead we have a different
non-overlapping type.
We combine the status_received_errmsg and status_sent_errmsg
into a single status_peer_error, with the presence or not of the
'error_for_them' field indicating direction.
We also rename status_fatal_connection_lost() to
peer_failed_connection_lost() to fit in.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We make it a macro, since everyone uses PEER_FD and GOSSIP_FD constants
(they're actually always the same, but this is slightly safer), and
add a gossip_index arg: this is groundwork for when we want to hand
the peer back to master for gossipd.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And now we can finally do the db upgrade to remove any OPENINGD
channels once, since we never put them back.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We usually did this, but sometimes they were named after what they did,
rather than what they cleaned up.
There are still a few exceptions:
1. I didn't bother creating destroy_xxx wrappers for htable routines
which already existed.
2. Sometimes destructors really are used for side-effects (eg. to simply
mark that something was freed): these are clearer with boutique names.
3. Generally destructors are static, but they don't need to be: in some
cases we attach a destructor then remove it later, or only attach
to *some* cases. These are best with qualifiers in the destroy_<type>
name.
Suggested-by: @ZmnSCPxj
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
DEBUG:root:lightningd(16333): 2018-02-08T02:12:21.158Z lightningd(8262): lightning_openingd(0382ce59ebf18be7d84677c2e35f23294b9992ceca95491fcf8a56c6cb2d9de199): Failed hdr decrypt with rn=2
We only hand off the peer if we've not started writing, but that was
insufficient: we increment the sn twice on encrypting packet, so there's
a window before we've actually started writing where this is now
wrong.
The simplest fix is only to hand off from master when we've just written,
and have the read-packet path simply wake the write-packet path.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We save wireaddr to databases as a string (which is pretty dumb) but
it turned out that my local node saved '[::ffff:127.0.0.1]:49150'
which our parser can't parse.
Thus I've reworked the parser to make fewer assumptions:
parse_ip_port() is renamed to separate_address_and_port() and is now
far more accepting of different forms, and returns failure only on
grossly malformed strings. Otherwise it overwrites its *port arg only
if there's a port specified. I also made it static.
Then fromwire_wireaddr() hands the resulting address to inet_pton to
figure out if it's actually valid.
Cc: William Casarin <jb55@jb55.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Now we have wirestring, this is much more natural. And with the
24M length limit, we needn't be so concerned about dumping 64k peer
messages in hex.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
These are now logically arrays of pointers. This is much more natural,
and gets rid of the horrible utxo array converters.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We currently don't handle LOG_IO properly, and we turn it into a string
before handing it to the ->print function, which makes it ugly for
the case where we're using copy_to_parent_log, and also means in
that case we lose *what peer* the IO is coming from.
Now, we handle the io as a separate arg, which is much neater.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We move it into jsonrpc where it belongs, and make it fail the command.
This means it can tell us exactly what was wrong.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This change could break users who accidentally have typos in scripts,
so we need to check sooner rather than later.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's a bit ugly because each caller has slightly different needs, but
we have three hooks and standard helpers.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
permute_outputs is sometimes called with empty arguments from initial_commit_tx.
Make sure we guard against that case. We also do the same in permute_inputs for
good measure.
Signed-off-by: William Casarin <jb55@jb55.com>
Our handling of SIGPIPE was incoherent and inconsistent, and we had much
cut & paste between the daemons. They should *ALL* ignore SIGPIPE, and
much of the rest of the boilerplate can be shared, so should be.
Reported-by: @ZmnSCPxj
Fixes: #528
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Removes the need to keep a second transaction around and marking it as
`noleak`, just to make sure that dependencies are not free'd along
with the original tx.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
The close_info is needed to re-derive the secret key that is supposed
to be used to sign the input spending the output.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This is necessary to grad the their_unilateral/to-us outputs since
they aren't being harvested by `onchaind`
Signed-off-by: Christian Decker <decker.christian@gmail.com>
The use of status_failed() requires a stubs update, which fails
with unnamed parameters, so tweak the status.h header as well.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's just a sha256_double, but importantly when we convert it to a
string (in type_to_string, which is used in logging) we use
bitcoin_blkid_to_hex() so it's reversed as people expect.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's just a sha256_double, but importantly when we convert it to a
string (in type_to_string, which is used in logging) we use
bitcoin_txid_to_hex() so it's reversed as people expect.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Correctly format ipv6 address with ports. This will also make it more compatible
with the new parse_wireaddr, which has been updated to parse ports. They are
inverses now.
Also add some tests that check this.
Signed-off-by: William Casarin <jb55@jb55.com>
* Add port parsing support to parse_wireaddr. This is in preparation for storing
addresses in the peers table. This also makes parse_wireaddr a proper inverse of
fmt_wireaddr.
* Move parse_wireaddr to common/wireaddr.c this seems like a better place for
it. I bring along parse_ip_port with it for convenience. This also fixes some
issues with the upcoming ip/port parsing tests.
Signed-off-by: William Casarin <jb55@jb55.com>
We were using changekey as the flag to produce change, not changesat,
but the caller was using changesat as the flag.
Also, don't allocate changekey at all if we don't need it; this means
valgrind will complain if we use it at all, too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Two changes:
- Fixed the function signature of noleak_ to match in both
configurations
- Added memleak.o to linker for tests
Generating the stubs for the unit tests doesn't really work since the
stubs are checked in an differ between the two configurations, so
adding memleak to the linker fixes that, by not requiring stubs to be
generated in the first place.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We create a temporary tx which is a child of the real tx, for simplicity of
marshalling. That's OK.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In particular, the pay command attaches all kinds of stuff to the
struct command; they're not really a leak, since commands expire.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is not a child of cmd, since they have independent lifetimes, but
we don't want to noleak them all, since it's only the one currently in
progress (and its children) that we want to exclude.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's a single, full-lifetime allocation; make sure we only exclude that
one, though this is fragile: tests will break if it moves.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We use the tal notifiers to attach a `backtrace` object on every
allocation.
This also means moving backtrace_state from log.c into lightningd.c, so
we can hand it to memleak_init().
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a primitive mark-and-sweep-style garbage detector. The core is
in common/ for later use by subdaemons, but for now it's just lightningd.
We initialize it before most other allocations.
We walk the tal tree to get all the pointers, then search the `ld`
object for those pointers, recursing down. Some specific helpers are
required for hashtables (which stash bits in the unused pointer bits,
so won't be found).
There's `notleak()` for annotating things that aren't leaks: things
like globals and timers, and other semi-transients.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
On unmarshal, we stop unmarshaling on a 0 (ADDR_TYPE_PADDING) type. So
we should also stop marshaling in that case.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We don't use it yet, but now we'll decode correctly.
See: https://github.com/lightningnetwork/lightning-rfc/pull/317
lightning-rfc commit: ef053c09431442697ab46e83f9d3f86e3510a18e
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Change all calls to use the correct serialization and deserialization
functions, include the correct headers and remove the control
messages.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We can tell this more generically because the count of revocations
received != count of commitments sent. This is the correct condition
which allows us to restore the test we had to eliminate in
c3cb7f1c85.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As per the pending spec change: the other implementations use version 2,
and the current best practice advice (from maaku) is to use the latest
defined tx version.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The wire protocol uses this, in the assumption that we'll never see feerates
in excess of 4294967 satoshi per kiloweight.
So let's use that consistently internally as well.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We currently scan through HTLCs: this isn't enough if we've only got a
feechange in the commitment, so use a flag (but keep both for now for
debugging).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This means we'll find anywhere still using the payment key,
even though we still expose the private payment key to channeld.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
All the callers need to pass it in: currently channeld and openingd just
fake it by copying the payment point.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
ie. non-printable, quotes or escapes. We allow these outside tokens
(we expect tabs and \n for example).
This is a big hammer, but if someone really wants we can add support
later.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Don't try to escape them. It's whack-a-mole and they shouldn't do it anyway.
Suggested-by: Christian Decker
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And nail "make check-source" to that specific version (which is a commit id,
not a branch name, so needs a different syntax for git).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In future it will have TOR support, so the name will be awkward.
We collect the to/fromwire functions in common/wireaddr.c, and the
parsing functions in lightningd/netaddress.c.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
They don't currently, since callers check, but be safe. In addition,
handle NULL returns from these in the bitcoind code.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a bit messier than I'd like, but we want to clearly remove all
dev code (not just have it uncalled), so we remove fields and functions
altogether rather than stub them out. This means we put #ifdefs in callers
in some places, but at least it's explicit.
We still run tests, but only a subset, and we run with NO_VALGRIND under
Travis to avoid increasing test times too much.
See-also: #176
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
For message read, we do it as header then body, so we can have
io_plan_in_started(conn) false, but we're between header and body.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We currently assume the daemon gives up; gossipd won't, and we want to
test it there too.
This reveals a bug (returning io_close() is bad if the call is to
duplex()), and breaks a test which now continues after dropping a
packet..
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Useful if we want to drop & suppress, for example. We change '=' to mean
do nothing to the packet.
We use this to clean up the test_reconnect_sender_add test.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In particular, the main daemon needs to pass it about (marshal/unmarshal)
but it won't need to actually use it after the next patch.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Also added a small warning to one of the used enums not to reorder or
insert values. They'd break the update path.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
For non-delayed HTLC success spends, we have a similar pattern ("<sig>
<preimage> <wscript>") so a we want to use the same function.
The other routines don't say "witness" in them, and should.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This change is really to allow us to have a --dev-fail-on-subdaemon-fail option
so we can handle failures from subdaemons generically.
It also neatens handling so we can have an explicit callback for "peer
did something wrong" (which matters if we want to close the channel in
that case).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
To reproduce the next bug, I had to ensure that one node keeps thinking it's
disconnected, then the other node reconnects, then the first node realizes
it's disconnected.
This code does that, adding a '0' dev-disconnect modifier. That means
we fork off a process which (due to pipebuf) will accept a little
data, but when the dev_disconnect file is truncated (a hacky, but
effective, signalling mechanism) will exit, as if the socket finally
realized it's not connected any more.
The python tests hang waiting for the daemon to terminate if you leave
the blackhole around; to give a clue as to what's happening in this
case I moved the log dump to before killing the daemon.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
You will want to 'make distclean' after this.
I also removed libsecp; we use the one in in libwally anyway.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Also, we split the more sophisticated json_add helpers to avoid pulling in
everything into lightning-cli, and unify the routines to print struct
short_channel_id (it's ':', not '/' too).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
To avoid everything pulling in HTLCs stuff to the opening daemon, we
split the channel and commit_tx routines into initial_channel and
initial_commit_tx (no HTLC support) and move full HTLC supporting versions
into channeld.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
