When we support bolt12, this won't exist. We only need min_final_cltv_expiry,
routes and features, so put them into struct payment explicitly.
We move the default final ctlv out to the caller, too, which is clearer.
e.g. keysend was using this value, but it was hard to tell.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We'll use it for figuring out whether or not to set a utxo witness
minimum, which comes much before we were setting this field.
Now we set the protocol as soon as we can reasonably deduce it.
we only want to sign the inputs that we've reserved via utxopsbt or
fundpsbt. we mark them with a flag (reusing the now defunct max-len
flag is fine), then look for inputs with that flag to pass to signonly
We only have output scripts for v1 protocols after the
fundchannel_start/openchannel_init round. We need to add them before
we get into the openchannel_update rounds, however, so we do that here.
I previously mistyped the rather lengthy conditions for failures, so
let's dissect it into its smaller components and add rationale behind
the individual parts of the decision.
This adds a new state `PAYMENT_STEP_RETRY_GETROUTE` which is used to
retry just that one step, without spawning a completely new
attempt. It's a new state so that modifiers do not act on it twice.
Changelog-Fixed: pay: Improved the performance of the `pay` command considerably by avoiding conflicting changes to our local network view.
We were delaying the channel_hint update till after the `createonion`
call which gave us the same situation we had with concurrent
`getroute` calls. Now we update the hints as soon as the plugins have
had their say in the route construction. If we still fail, either
because a modifier changed the route causing the failure, or because
we interleaved the route computation for multiple parts, we reset the
attempt and retry inline (i.e., without creating a new sub-payment).
Notice that interleaved route computations now only happen if the
modifier makes an async call to some RPC or similar.
1. One place returned false instead of -1.
2. The names implied it returned a bool, and it doesn't.
Fix both, and curse C's loose typing a little.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Note that check-whitespace and check-bolt already do this, so we
can eliminate redundant lines in common/Makefile and bitcoin/Makefile.
We also include the plugin headers in ALL_C_HEADERS so they get
checked.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Technically there *are* two feerates that we need to know:
- the feerate to use for the funding transaction, and
- the feerate to tell our peer to use for our commitment txs/htlc txs
As written, `multifundchannel` uses the same feerate for both. This
optional parameter will allow us to differentiate between the two, which
will be exceedingly handy for anchor output worlds. ;)
FIXME: test this
Changelog-Added: JSON API: `multifundchannel` has a new optional argument, 'commitment_feerate', which can be used to differentiate between the funding feerate and the channel's initial commitment feerate
This is a fairly direct translation. Even so, it should be faster in
most cases, and and we can do more sophisticated things if we want.
This also handles disabled channels better.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: plugins: `pay` will now try disabled channels as a last resort.
Finally, extends the 'close_to' functionality up to the flagship 'open a
channel' command.
Changelog-Added: JSON-API `fundchannel` now accepts an optional 'close_to' param, a bitcoin address that the channel funding should be sent to on close. Requires `opt_upfront_shutdownscript`
We're rarely in a hurry here, and bitcoind is aggressive with fees.
You can always spend this output if you really have to, using CPFP.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Protocol: mutual closing feerate reduced to "slow" to avoid overpaying.
I got a corrupt file, which looked like multiple concurrent attempts
to build it. So instead, build it in one command, but also use
VERBOSE so we print correctly with V=1 (and --quiet).
Also move into plugins/ where it logically belongs.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Deprecated, but this can happen:
```
==1578== Conditional jump or move depends on uninitialised value(s)
==1578== at 0x12B30E: amount_msat_add (amount.c:224)
==1578== by 0x11270B: add_amount_sent (pay.c:1734)
==1578== by 0x112D89: listsendpays_done (pay.c:1831)
==1578== by 0x114F4B: handle_rpc_reply (libplugin.c:555)
==1578== by 0x115704: rpc_read_response_one (libplugin.c:685)
==1578== by 0x115821: rpc_conn_read_response (libplugin.c:705)
==1578== by 0x148E40: next_plan (io.c:59)
==1578== by 0x1499BD: do_plan (io.c:407)
==1578== by 0x1499FB: io_ready (io.c:417)
==1578== by 0x14BBC1: io_loop (poll.c:445)
==1578== by 0x117A82: plugin_main (libplugin.c:1322)
==1578== by 0x113ABC: main (pay.c:2096)
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: #3926
(probably)
Changelog-Fixed: pay: Also limit the number of splits if the payee seems to have a low number of channels that can enter it, given the max-concurrent-htlcs limit.
The routehints paymod shares the storage of the array d->routehints and
p->invoice->routes, but once it operates, it possibly leaves it as a stale
pointer to memory it used to have.
Since other paymods may be interested in the invoice details, including
the routehints in the invoice, we should ensure the p->invoice->routes
remains valid whenever we try mutating that array.
As revealed by the failure of tests in #3936, where we ended up trying
to send a partial payment using legacy style, we are not handling
style properly.
1. BOLT9 has features, so we can *know* that the destination supports
MPP. We may not have seen a node_announcement.
2. We can't assume that nodes inside routehints support TLV.
3. We can't assume direct peers support TLV.
The keysend code tried to fix this up, so I'm not sure that this caused
the issue in #3968, though.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: `pay` will now make reliable multi-part payments to nodes it doesn't have a node_announcement for.
This will update the fee output if it exists, rather than unilaterally
adding a new one.
Also, if the fee output already exists, we should make sure that it
doesn't interfere with the outnums of the other outputs
Fixes: #2679
Changelog-Added: JSON-RPC: New `multiwithdraw` command to batch multiple onchain sends in a single transaction. Note it shuffles inputs and outputs, does not use BIP69.
Changelog-Added: We now have `multifundchannel` as a builtin plugin command to fund multiple channels to different peers all in a single onchain transaction.
Header from folded patch 'fixup-use-json_add_psbt.patch':
fixup!
Header from folded patch 'use-goto-no-ok-chain.patch':
fixup!
Header from folded patch 'destinations-at-parse-time.patch':
fixup!
Header from folded patch 'multifundchannel__use_jsmntoks_to_pass_through_json_string,_not_strings.patch':
multifundchannel: use jsmntoks to pass through json string, not strings
Passing in "" for utxos would crash lightningd on the command-line
otherwise. Now returns an error.
Header from folded patch 'update_plugins-multifundchannel.c.patch':
Update plugins/multifundchannel.c
Co-authored-by: Darosior <darosior@protonmail.com>
Changelog-Deprecated: plugin: `bcli` replacements should note that `sendrawtransaction` now has a second required Boolean argument, `allowhighfees`, which if `true`, means ignore any fee limits and just broadcast the transaction. Use `--deprecated-apis` to use older `bcli` replacement plugins that only support a single argument.
This removes the reservation cleanup at startup, too, now they're all
using 'reserved_til'.
This changes test_withdraw, since it asserted that outputs were marked
spent as soon as we broadcast a transaction: now they're reserved until
it's mined. Similarly, test_addfunds_from_block assumed we'd see funds
as soon as we broadcast the tx.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `withdraw` now randomizes input and output order, not BIP69.
This is a little lazy, but simpler than extracting the common parts
or making withdraw a plugin which calls txprepare (which should be
deprecated soon in favor of fundpsbt etc).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Some minor phrasing differences cause test changes.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: txprepare reservations stay across restarts: use fundpsbt/reservepsbt/unreservepsbt
Changelog-Removed: txprepare `destination` `satoshi` argument form removed (deprecated v0.7.3)
This uses `fundpsbt` and similar to simulate the txprepare command.
It has one difference (when complete), in that it those reservations
are now timed and don't get reset on restart.
It also doesn't have the restriction that `all` can only be used with
no other output, as I didn't realize that when I implemented it!
Note that change is now inserted in a random position, not sorted
into BIP69 order.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This avoids overwriting the ones in git, and generally makes things neater.
We have convenience headers wire/peer_wire.h and wire/onion_wire.h to
avoid most #ifdefs: simply include those.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We were using `tal_fmt` to truncate off the last byte of the
response (newline), which required an allocation, a call to `vsnprintf` and a
copy of the block contents. This being >2MB in size on mainnet was rather
expensive.
We now just signal the end of the string by overwriting the trailing newline,
and stealing directly onto the result.
We create ALL_PROGRAMS, ALL_TEST_PROGRAMS, ALL_C_SOURCES and
ALL_C_HEADERS. Then the toplevel Makefile knows which are
autogenerated (by wildcard), so it can have all the rules to clean
them or check the source as necessary.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Using `waitblockheight 0` is a very slightly faster query than `getinfo`.
Also, avoid querying blockheight for child payments (allow `waitblockheight`
paymod to provide the blockheight returned from the `waitblockheight`, and
just resample the starting blockheight from the parent).
Changelog-None: pointless micro-optimization
This was checked with `gcc -S -O2` to see how an optimized build
would compile the function.
The original code completed calls into each child (and the `.s`
file showed that GCC 9.x was not smart enough to do early-out).
This modification explicitly does early-out, and avoids call-return
stack overhead for the common case where a payment is an ancestor
of a long line of single-child payments due to retrying.
Changelog-None: pointless micro-optimization
This is the simplest possible fix: increase the target amount until we get
the desired number of parts, while still bucketizing payments together that
are in approximately the same size.
The current logic puts all payments that are in the range x < amount <= 16*x
in the same bucket, making them harder to distinguish.
Changelog-Fixed: pay: The `presplit` modifier now supports large payments without exhausting the available HTLCs.
We have sanity checks in there that it's a valid point. Simply store
the JSON token like we do with others.
time lightning-cli -R --network=regtest --lightning-dir /tmp/ltests-k8jhvtty/test_pay_stress_1/lightning-1/ listpays > /dev/null
Before:
real 0m2.054s
user 0m0.114s
sys 0m0.024s
After:
real 0m1.781s
user 0m0.127s
sys 0m0.013s
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
time lightning-cli -R --network=regtest --lightning-dir /tmp/ltests-k8jhvtty/test_pay_stress_1/lightning-1/ listpays > /dev/null
Before:
real 0m12.447s
user 0m0.143s
sys 0m0.008s
After:
real 0m2.054s
user 0m0.114s
sys 0m0.024s
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
memmem is also O(n^2), though it's faster. Now we have infrastructure,
let's do incremental parsing.
time lightning-cli -R --network=regtest --lightning-dir /tmp/ltests-k8jhvtty/test_pay_stress_1/lightning-1/ listpays > /dev/null
Before:
real 0m13.674s
user 0m0.131s
sys 0m0.024s
After:
real 0m12.447s
user 0m0.143s
sys 0m0.008s
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This doesn't make any difference, since lightningd generally sends us
short commands (command responses are via the rpc loop, which is
already done), but it's harmless.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The jsmn parser is a beautiful piece of code. In particular, you can parse
part of a string, then continue where you left off.
We don't take advantage of this, however, meaning for large JSON objects
we parse them multiple times before finally having enough to complete.
Expose the parser state and tokens through the API, so the caller can pass
them in repeatedly. For the moment, every caller is allocates each time
(except the unit tests).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We're going to change the API on the more complete JSON parser, so
make and use a simple API for the easy cases.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Tested on a test node which had made 50,000 payment, with no optimization.
For comparison, time for 'listsendpays' was 0.983s.
time lightning-cli -R --network=regtest --lightning-dir /tmp/ltests-k8jhvtty/test_pay_stress_1/lightning-1/ listpays > /dev/null
Before:
real 0m52.415s
user 0m0.127s
sys 0m0.044s
After:
real 0m42.741s
user 0m0.149s
sys 0m0.016s
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: libplugin: significant speedups for reading large JSON replies (e.g. calling listsendpays on large nodes, or listchannels / listnodes).
It's currently always 0, but it won't be once we replace txprepare.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `fundchannel` has new `outnum` field indicating which output of the transaction funds the channel.
Reported-by: ZmnSCPxj
Signed-off-by: Christian Decker <@cdecker>
Changelog-Fixed: pay: Correct a case where we put the sub-payment value instead of the *total* value in the `total_msat` field of a multi-part payment.
Only advance through routehints if no route was found at all, or if the
estimated capacity at the routehint is lower than the amount that we
have to send through the routehint.
Changelog-Fixed: pay: Be less aggressive with forgetting routehints.
