In the case where you're echoing back a tx-abort, just let it through.
Not doing this causes problems in the case where your node has forgotten
about an in-progress open.
This fixes the following problem:
- you send a tx-abort (even tho you have marked tx-sigs as received)
- peer echos it back (we echo back tx-aborts always)
- you throw an error because you're already in a tx-abort unallowed
state
In this commit, we allow for echos to come thru no matter our current state and
this fixes things/makes them work as expected.
If you get the right series of disconnects, it's possible for your peer
to send you a tx-sigs even though the current state of the channel open
is that you've seen the funding open on chain (your channel_ready[LOCAL]
= true)
In this case, if we haven't marked that we've seen the tx sigs yet,
we go ahead and mark them as seen and just ignore this tx-sigs msg.
If we get a commitment-signed message from a peer, outside of a normal
flow, process it!
We're about to send these during reconnect, so we need to be able to
handle them!
We're going to need to reuse this for reconnect; make the method
standalone in that it can figure out what to send to HSMD independent of
where it's located in the setup call flow.
We need to keep track of if we've gotten the last negotiation's
commitment sigs, for reconnect logic (helps us know what messages to
send in the reconnect case)
Here, we split up what was "commit_received" into two phases:
- commit-ready, where we're about to send our commitment tx to
peer
- commit-received, when we've gotten the commitment tx from our
peer
This lets us do the right thing (as far as the spec is concerned) with
returning the correct 'next_funding_txid' on reconnect (later commits).
Tihis commit is implementing a 2-phase commit between
the signer the node and the peer.
The main reason for this is that everybody must agree on the lock,
otherwise one of them will want N signatures (on the splice candidates),
and another will produce only 1 signature.
check_outpoint is the "prepare" for the signer, and lock_outpoint is the
"commit". if check_outpoint returns true, lock_outpoint must not fail.
Link: https://github.com/ElementsProject/lightning/issues/6722
Suggested-by: @devrandom
Co-Developed-by: Ken Sedgwick <ken@bonsai.com>
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Originally VLS used hsmd_ready_channel as an early call during channel
setup, but later the BOLT-2 spec changed the name of funding_locked to channel_ready.
This is very confusing because the hsmd_ready_channel is not directly
related to the new channel_ready.
This commit is renaming the hsmd_ready_channel to hsmd_setup_channel.
Link: https://github.com/ElementsProject/lightning/issues/6717
Suggested-by: Ken Sedgwick
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
We generalize the current df-only "aborted" flag (and invert it) to a
"disconnected" flag in the peer status message.
We convert it back to the aborted flag for now inside subd.c, but that's
next.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This makes it easier to use outside simple subds, and now lightningd can
simply dump to log rather than returning JSON.
JSON formatting was a lot of work, and we only did it for lightningd, not for
subdaemons. Easier to use the logs in all cases.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We were allowed to, but the spec removed that. So we handle warnings
differently from errors now.
This also means the LND "internal error" workaround is done in
lightningd (we still disconnect, but we don't want to close channel).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Protocol: we no longer disconnect every time we receive a warning message.
Update the lightningd <-> channeld interface with lots of new commands to needed to facilitate spicing.
Implement the channeld splicing protocol leveraging the interactivetx protocol.
Implement lightningd’s channel_control to support channeld in its splicing efforts.
Changelog-Added: Added the features to enable splicing & resizing of active channels.
Update gossip routiens and various other hecks on the channel state to consider AWAITING_SPLICE to be routable and treated similar to CHANNELD_NORMAL.
Small updates to psbt interface
Changelog-None
Clean restart of daemon after a tx-abort is a nice way to work around
the 'persistent' disconnect that we t-bast noticed.
Changelog-Fixed: `dualopend`: Fix behavior for tx-aborts. No longer hangs, appropriately continues re-init of RBF requests without reconnction msg exchange.
As per cd3c99e722
we should send the next_funding_txid if we've sent our commitment sigs,
but we haven't received the peer's tx_signatures.
Note that we send here, but don't verify that it's arrived.
In most cases, it's the same as option_anchor_outputs, but for
fees it's different. This transformation is the simplest:
pass it as a pair, and test it explicitly.
In future we could rationalize some paths, but this was nice
and mechanical.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We need to know both, because in theory we could negotiate a
non-anchor channel even if they support it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And no longer insist on opt_quiesce.
Changelog-EXPERIMENTAL: Config: `--experimental-upgrade-protocol` enables simple channel upgrades.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: Protocol: we will upfront reject channel_open which asks for a zeroconf channel unless we are going to do a zerconf channel.
Libwally update breaks compatibility, so
we do this in one large step.
Changelog-Changed: JSON-RPC: elements network PSET now only supports PSETv2.
Changelog-Added: JSON-RPC: PSBTv2 supported for fundchannel_complete, openchannel_update, reserveinputs, sendpsbt, signpsbt, withdraw and unreserveinputs parameter psbt, openchannel_init and openchannel_bump parameter initialpsbt, openchannel_signed parameter signed_psbt and utxopsbt parameter utxopsbt
- Renamed zerod_channel_ids to temporary_channel_id
- Renamed witness_stack->witnesses
- Renamed witness_element->witness_elements
- open_channel2 now includes second commitment point
- accept_channel2 now includes second commitment point
Current commit on rfc branch 64f7f360b9f3c2664d078e2129cfe83098fc4617
Changelog-EXPERIMENTAL: Protocol: dual-funding spec changed in incompatible ways, won't work with old versions (but maybe soon with Eclair!!)
It's not likely but possible that the node's settings will shift btw a
start and an RBF; we persist the setting to the database so we don't
lose it.
Right now holding onto it forever is kind of extra but maybe we'll
reuse the setting for splices? idk.
Should this be a channel type??
`openchannel_init` takes a psbt, which we pipe over to dualopend
process.
If the peer requests that they'll only accept confirmed inputs, we need
to go validate those before we continue.
This wires up the harness for this (validation check yet tc)
Wait until we get a tx-abort back to terminate the process.
Nota Bene: this can cause RPC calls to hang if the peer never
responds back with tx-abort.
Note that we also have to re-route how open-abort + negotiation_failed
handle failures, as open_abort no longer closes the process
automagically.
When a channel open fails, we use tx-abort instead of warning/error.
This means that the peer won't disconnect! And instead when a new
message arrives, we'll need to rebuild the dualopend subd (if missing).
Makes opens a bit easer to retry (no reconnect needed), as well as keeps
the connection alive for other channels we may have with that peer.
Changelog-Changed: Experimental-Dual-Fund: open failures don't disconnect, but instead fail the opening process
