Currently it just defaults to the DEVELOPER compile option, but we'll
move over to this.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Config: `--developer` enables developer options and changes default to be "disable deprecated APIs".
1. announce-addr-discovered-port takes a port option.
2. accept-htlc-tlv-types was deprecated in favor of multiple accept-htlc-tlv-type.
3. Document clnrest.py options.
4. Don't list --version twice in lightningd --help (initial_config_opts calls
opt_register_version() already).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This was recommended by @t-bast: if the final spec commits to something
compatible, we can simply advertize and accept both features, but if it
does change in incompatible ways we won't cause problems for nodes
who implement the official spec.
(I split this, so first, we remove the OPT_SPLICE entirely, to make
sure we caught them all. --RR)
Suggested-by: @t-bast
Changelog-None
This was strongly recommended by Russell O'Connor: the "ms" implies that
it's a BIP-32 master secret, and this is CLN specific.
If we changed the hrp to "cln" it would be better, but apparently that
means we no longer fit in a "standard billfold metal wallet" (and
our code assumes a 2-byte prefix anyway).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Update the lightningd <-> channeld interface with lots of new commands to needed to facilitate spicing.
Implement the channeld splicing protocol leveraging the interactivetx protocol.
Implement lightningd’s channel_control to support channeld in its splicing efforts.
Changelog-Added: Added the features to enable splicing & resizing of active channels.
Firstly, I wanted the results easier to use:
1. Make them always lower case, even if the string was UPPER.
2. Decode the payload for them.
3. Don't give the user any fields they don't need, and make
the field sizes explicit.
Secondly, I wanted to avoid the pattern of "check in one place, assume
in another", in favour of "check on use".
So, I changed the code to lower the string if it needs to at the start,
and then changed the pull functions so we always use them to get data:
this way we should fail clearly and gracefully if we don't have enough data.
I made all the checks explicit, where we assign the fields.
I also addressed the FIXME: I think the array is *often* one shorter,
but not always, so I trim the last byte at the end if needed.
[ Aditya modified the tests to work ]
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We usually have access to `ld`, so avoid the global.
The only place generic code needs it is for the json command struct,
and that already has accessors: add one for libplugin and lightningd
to tell it if deprecated apis are OK.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is the simple version which always tries to keep some sats if we
have an anchor channel. Turns out that we need something more
sophisticated for multifundchannel, so that's next.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `withdraw` will refuse to spend funds below `min-emergency-msat` if we have any anchor channels (and `all` will be reduced appropriately).
Changelog-Changed: JSON-RPC: `fundpsbt` and `utxopsbt` will refuse to spend funds below `min-emergency-msat` if we have any anchor channels.
For anchors, we need some sats sitting around in case we need to CPFP
a close.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Config: `min-emergency-msat` setting for (currently experimental!) anchor channels, to keep funds in reserve for forced closes.
We disabled experimental support for opening non-zero-fee anchor
channels (though old nodes may still have such channels if they turned
that on!).
So we simply call this `experimental-anchors`, since this is the variant
which we expect to be used widely.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: protocol: added support for zero-fee-htlc anchors (`option_anchors_zero_fee_htlc_tx`), using `--experimental-anchors`.
Previously, if these failed we always exited; once we have dymamic
configs this would be a (tiny) memory leak, so use tmpctx.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
To test, we do min-capacity-sat which is simple. We also update the
listconfigs man page which contained some obsolete information.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: JSON-RPC: `listconfigs` direct fields, use `configs` sub-object and `set`, `value_bool`, `value_str`, `value_int`, or `value_msat` fields.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This integrates them with configvars properly: they almost "just work"
in listconfigs now, and we don't put them in a special sub-object
under their plugin.
Unfortunately, this means `listconfigs` now has a loose schema: any
plugin can add something to it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: Plugins: reloaded plugins get passed any vars from configuration files.
Changelog-Deprecated: Config: boolean plugin options set to `1` or `0` (use `true` and `false` like non-plugin options).
We use multi-specifiable options elsewhere, this is just another.
Otherwise you can't add, you can only set them all.
Changelog-Added: Config: `accept-htlc-tlv-type` (replaces awkward-to-use `accept-htlc-tlv-types`)
Changelog-Deprecated: Config: `accept-htlc-tlv-types` (use `accept-htlc-tlv-type` multiple times)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
listconfigs is convenient, but it doesn't handle multi-options well: it
outputs an object with duplicate fields in this case (e.g. log-file), nor
is it extensible to show more than raw values.
However, listconfigs doesn't do what other list commands do (use a
sub-object "configs") so we can put the new values under that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `listconfigs` now has `configs` subobject with more information about each config option.
It literally contained \" to avoid it being interpreted as a literal;
now we have OPT_SHOWINT we no longer need this hack.
It's obscure, so I'm not bothering with a deprecation cycle.
Changelog-Fixed: JSON-RPC: `listconfigs` `rpc-file-mode` no longer has gratuitous quotes (e.g. "0600" not "\"0600\"").
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We have hacky code to show some listconfigs values as literals; instead
explicitly encode the types.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Clearly, listconfigs shouldn't list these.
Also, hoist the opt_hidden check since it's independent of whether
there's an arg or not.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's an obscure command, but this we won't see old plugin commands in
listconfigs (once it uses configvars).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Now we wire in the code which gathers configvars and parses from there;
lightningd keeps the array of configuration variables for future use.
Note that lightning-cli also needs to read the config, but it has its
own options (including short ones!) and doesn't want to use this
configvar mechanism, so we have a different API for that now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a nod towards moving to runtime-developer-mode, and also
quite clear; we currently have all these options prefixed with dev,
but this flags makes handling explicit.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This will be used for listconfig, which knows these should be presented
as arrays, not single values.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Note that this actually changes listconfigs output for three msat
fields, which were not changed with the great msat merge. Since
listconfigs isn't actually used by grpc, and the values are always a
little vague, I simply changed this.
Changelog-Fixed: JSON-RPC: `listconfigs` `htlc-minimum-msat`, `htlc-maximum-msat` and `max-dust-htlc-exposure-msat` fields are now numbers, not strings.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This adds:
1. ability to search for an option by name.
2. allowance to set our own bits when registering options.
3. show callbacks which can say "don't show", and variable length.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
These are only likely to confuse users, by silently changing behavior.
Changelog-Deprecated: Config: bind-addr=xxx.onion and addr=xxx.onion, use announce=xxx.onion (which was always equivalent).
Changelog-Deprecated: Config: addr=/socketpath, use listen=/socketpath (which was always equivalent).
This obsoletes the use of --announce-addr-dns which I know Michael
didn't really like either.
Changelog-Deprecated: Config: `announce-addr-dns`; use `--bind-addr=dns:ADDR` for finer control.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a major cleanup to how we parse addresses.
1. parse_wireaddr now supports the "dns:" prefix to support dns records (type 5).
2. We are less reliant on separate_address_and_port() which gets confused by
that colon.
3. We explicitly test every possible address type we can get back from
parsing, and handle them appropriately.
We update the documentation to use the clearer HOSTNAME vs DNS prefixes now
we also have `dns:` as a prefix.
Changelog-Added: Config: `bind` can now take `dns:` prefix to advertize DNS records.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. Make it the standard "return the error" pattern.
2. Rather than flags to indicate what types are allowed, have the callers
check the return explicitly.
3. Document the APIs.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: Build: all experimental features are now runtime-enabled; no more ./configure --enable-experimental-features
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And no longer insist on opt_quiesce.
Changelog-EXPERIMENTAL: Config: `--experimental-upgrade-protocol` enables simple channel upgrades.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Turns out the two bcli replacements I checked (`sauron` and
`trustedcoin`) don't even implement this, and the multiplier makes
more sense in lightningd, especially as we move to bcli just providing
raw feerate estimates.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In particular:
- Bolt 4: add route blinding construction
- Bolt 4: add blinded payments
And this means it's not experimental, so we can turn it on
by default!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: blinded payments are now supported by default (not just with `--experimental-onion-messages`)
