It wasn't JSON formatted either so there was no nice pretty-printing
way. This jsonifies and pretty prints it.
Signed-off-by: Christian Decker <@cdecker>
We no longer use `dev-override-fees` to set the fees, rather we
instrument the `bitcoind` proxy to return the desired feerates.
Signed-off-by: Christian Decker <@cdecker>
pytest was an indirect dependency so far, making that one
explicit, and the timeout plugin should allow us to kill a stuck test
before travis kills it, and thus allow us to see where it got stuck.
Signed-off-by: Christian Decker <@cdecker>
Because gossip in this case takes up to a minute, this test took 10
minutes. The workaround is to do the waiting-for-gossip all at once.
Now it takes 362 seconds.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Unlike other daemons, closingd doesn't listen to the master, but runs
simply to its own beat. So instead of responding to the JSON dev_memleak
command, we always check for memory leaks, and make sure that the
python tests fail if they see MEMLEAK in the logs.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We now keep multiple commands for a json_connection, and an array of
json_streams.
When a command wants to write something, we allocate a new json_stream
at the end of the array.
We always output from the first available json_stream; once that
command has finished, we free that and move to the next. Once all are
done, we wake the reader.
This means we won't read a new command if output is still pending, but
as most commands don't start writing until they're ready to write
everything, we still get command parallelism.
In particular, you can now 'waitinvoice' and 'delinvoice' and it will
work even though the 'waitinvoice' blocks.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We need to keep the remaining buffer, and we need to try to parse it
before we read the next. I first tried keeping it in the object, but
its lifetime is that of the *socket*, which we actually reopen for
every command.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This was hanging sometimes in travis, but actually checking the result
of the commands makes it *always* hang. We remove the waitinvoice
which will not return.
ZmnSCPxj points out that this behavior, introduced in
ce0bd7abd3, is a regression: it would be
nice to be able to cancel a waitinvoice. But that fix is more complex,
and will have to be another PR.
This test will now hang, but it's OK: we're about to fix it!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
When developing in regtest or testnet it is really inconvenient to
have to fake traffic and generate blocks just to get estimatesmartfee
to return a valid estimate. This just sets the minfee if bitcoind
doesn't return a valid estimate.
Reported-by: Rene Pickhardt <@renepickhardt>
Signed-off-by: Christian Decker <@cdecker>
In one case we can reduce, in the others we eliminated if VALGRIND.
Here are the ten slowest tests on my laptop:
469.75s call tests/test_closing.py::test_closing_torture
243.61s call tests/test_closing.py::test_onchain_multihtlc_our_unilateral
222.73s call tests/test_closing.py::test_onchain_multihtlc_their_unilateral
217.80s call tests/test_closing.py::test_closing_different_fees
146.14s call tests/test_connection.py::test_dataloss_protection
138.93s call tests/test_connection.py::test_restart_many_payments
129.66s call tests/test_gossip.py::test_gossip_persistence
128.73s call tests/test_connection.py::test_no_fee_estimate
122.46s call tests/test_misc.py::test_htlc_send_timeout
118.79s call tests/test_closing.py::test_onchain_dust_out
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
generate was deprecated some time ago, so we added the generate_block()
helper. But many calls crept back in, and git master refuses it.
(test_blockchaintrack relied on the return value, so make generate_block
return the list of blocks).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
After Ubuntu 18.10 upgrade, lots of new flake8 warnings.
$ flake8 --version:
3.5.0 (mccabe: 0.6.1, pycodestyle: 2.4.0, pyflakes: 1.6.0) CPython 3.6.7rc1 on Linux
Note it seems that W503 warned about line breaks before binary
operators, and W504 complains about them after. I prefer W504, so
disable W503.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Occasional failure in test_fulfill_incoming_first where the channel
closed before the final message from dev_disonnect was read. Cause
was the peer writing a gossip msg and failing due to ECONNRESET, before
it read the final message.
(Managed to reproduce under strace -f, FTW).
This is really a symptom of the fact that line_graph's announce=True
didn't wait for node announcements. Let's do that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
When we have multiple HTLCs with the same preimage and the same CLTV,
it doesn't matter what order we treat them (they're literally
identical). But when we offer HTLCs with the same preimage but
different CLTVs, the commitment tx outputs look identical, but the
HTLC txs are different: if we simply take the first HTLC which matches
(and that's not the right one), the HTLC signature we got from them
won't match. As we rely on the signature matching to detect the fee
paid, we get:
onchaind: STATUS_FAIL_INTERNAL_ERROR: grind_fee failed
So we alter match_htlc_output() to return an array of all matching
HTLC indices, which can have more than one entry for offered HTLCs.
If it's our commitment, we loop through until one of the HTLC
signatures matches. If it's their commitment, we choose the HTLC with
the largest CLTV: we're going to ignore it once that hits anyway, so
this is the most conservative approach. If it's a penalty, it doesn't
matter since we steal all HTLC outputs the same independent of CLTV.
For accepted HTLCs, the CLTV value is encoded in the witness script,
so this confusion isn't possible. We nonetheless assert that the
CLTVs all match in that case.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We set up HTLCs with the same preimage and both different and same
CLTVs in both directions, then make sure that onchaind is OK and that
the HTLCs are failed without causing downstream failure.
We do this for both our-unilateral and their-unilateral cases.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Create a second HTLC with a different CTLV but same preimage; onchaind
uses the wrong signature and fails to grind it.
Reported-by: molz (#c-lightning)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This was suggested by Pierre-Marie as the solution to the 'same HTLC,
different CLTV' signature mismatch.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
My test case is a mainnet gossip store with 22107 channels, and
time to do `lightning-cli listchannels`:
Before: `lightning-cli listchannels` DEVELOPER=0
real 0m1.303000-1.324000(1.3114+/-0.0091)s
After:
real 0m0.629000-0.695000(0.64985+/-0.019)s
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This also highlights the danger of searching the logs: that error
appeared previously in the logs, so we didn't notice that the actual
withdraw call gave a different error.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And use wallet_forward_status_in_db() everywhere in db code.
And clean up extra CHANGELOG.md entry (looks like rebase error?)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Adapts the `test_forward_stats` test to include checks for the
`forwarded_payments` table. Will add checks for the `listforwardings`
RPC call next.
Signed-off-by: Christian Decker <@cdecker>
When the wrong key is used, the remote end simply hangs up.
We used to get a random errno, which tends to be "Operation now in progress."
Now it's defined to be 0, detect and provide a better error.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Have c-lightning nodes send out the largest value for
`htlc_maximum_msat` that makes sense, ie the lesser of
the peer's max_inflight_htlc value or the total channel
capacity minus the total channel reserve.
We don't create unannouncable channels, but other implementations can.
Not only is it rude to expose these via invoices, it's probably not
useable anyway.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There is an issue with the way we retrieve the channel accounting info
that will result in always showing 0 for all stats. This tests for it
and the next commit will fix it.
During tests, this is half our log! And Travis truncates it if we get
a failure in test_restart_many_payments.
Interestingly, test_logging had a bug which relied on this spam :)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We don't save them to the database, so fix things up as we load them.
Next patch will actually save them into the db, and this will become
COMPAT code.
Also: call htlc_in_check() with NULL on db load, as otherwise it aborts
internally.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
