And consolidate descriptions into lightning-feerates().
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `close`, `fundchannel`, `fundpsbt`, `multifundchannel`, `multiwithdraw`, `txprepare`, `upgradewallet`, `withdraw` now allow "minimum" and NN"blocks" as `feerate` (`feerange` for `close`).
We only handle top-level objects with an array of objects:
make sure it is one before we call the routines.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This means we will document deprecations and additions, rather than just
pretending they've always been that way!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The only time underscores aren't special in Markdown is when they appear
in preformatted text. We have gotten away with not escaping underscores
where an asterisk-enclosed span or the paragraph ends before the next
underscore appears, but this is fragile and bad practice. Conversely,
there are many places where we have not escaped underscores but needed
to.
Escape all underscores that do not appear in preformatted blocks or
preformatted spans and are not themselves delineating emphasized spans.
The changes in this commit are exactly the result of executing the
following Bash code:
```bash
e=':x;' # begin loop
e+='s/^' # anchor match at beginning of line
e+='(' # begin capturing subexpression
e+='(' # begin list of alternatives
e+='[^`_\\]|' # any mundane character, or
e+='`([^`\\]|\\.)*`|' # backtick-enclosed span, or
e+='\b_|_\b|' # underscore at boundary, or
e+='\\.' # backslash-escaped character
e+=')*' # any number of the preceding alternatives
e+=')' # end capturing subexpression
e+='\B_\B/\1\\_/;' # escape non-formatting underscore
e+='tx' # repeat loop if we escaped an underscore
escape_underscores=(
sed
# use extended regular expressions
-E
# skip over indented blocks (following an empty line)
-e '/^$/{:i;n;/^( {4,}|\t)/bi}'
# skip over preformatted blocks
-e '/^\s*```/,/^\s*```/{p;d}'
# skip over generated sections
-e '/GENERATE-FROM-SCHEMA-START/,/GENERATE-FROM-SCHEMA-END/{p;d}'
# escape underscores
-e "${e}"
)
"${escape_underscores[@]}" -i doc/*.[0-9].md
```
Changelog-None
If there's only a single underscore, lowdown ignores it, but if there are multiple
(see min_final_cltv_expiry) it decides we're trying to highlight part of the word.
Reported-by: @wtogami
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. If the tool changes, you need to regenerate since the output may
change.
2. This didn't just filter that out, ignored all but the first
dependency, which made bisecting the bookkeeper plugin a nightmare:
it didn't regenerate the .po file, causing random crashes.
If we want this, try $(filter-out tools/fromschema.py) instead. But I
don't think we want that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
You can't start a list without a paragraph separator.
```diff
--- /tmp/before 2022-07-20 22:02:23.485372596 +0930
+++ /tmp/after 2022-07-20 22:02:33.745528456 +0930
@@ -21,12 +21,16 @@
On startup of the daemon, no autoclean is set up.
RETURN VALUE
- On success, an object is returned, containing: - enabled (boolean):
- whether invoice autocleaning is active
+ On success, an object is returned, containing:
- If enabled is true: - expired_by (u64): how long an invoice must be ex‐
- pired (seconds) before we delete it - cycle_seconds (u64): how long an
- invoice must be expired (seconds) before we delete it
+ • enabled (boolean): whether invoice autocleaning is active
+
+ If enabled is true:
+
+ • expired_by (u64): how long an invoice must be expired (seconds) be‐
+ fore we delete it
+ • cycle_seconds (u64): how long an invoice must be expired (seconds)
+ before we delete it
AUTHOR
ZmnSCPxj <ZmnSCPxj@protonmail.com> is mainly responsible.
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Mostly comments and docs: some places are actually paths, which
I have avoided changing. We may migrate them slowly, particularly
when they're user-visible.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This doesn't have an effect now (except in experimental mode), but it
will when we support anchors. So we deprecate the use of those in the
close command too.
For experimental mode we have to avoid using p2pkh; adapt that test.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: JSON-RPC: `shutdown` no longer allows p2pkh or p2sh addresses.
mrkd doesn't like non-ASCII characters in ubuntu:18.04, used for
repro-builds. This is the easiest way to sidestep this issue until we
deprecate the old ubuntu version.
That was quick!
We remove the 50% test, since the default is now to use quickclose.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: We now perform quick-close if the peer supports it.
This affects the range we offer even without quick-close, but it's
more critical for quick-close.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSONRPC: `close` now takes a `feerange` parameter to set min/max fee rates for mutual close.
By default, we won't close a channel that we leased to a peer.
You can override this with the `force_lease_closed` flag.
Changelog-Added: JSON-RPC: close now has parameter to force close a leased channel (option_will_fund)
1. listpeers has a deprecated `"closer": null`, which we need
to handle in the schema, while trying not to damage our
documentation too much.
2. Don't print a condition if there are no fields to print.
3. Allow a special "untyped" marker for multifundchannel which returns
arbitrary JSON in a field.
4. Allow a single field return (for 'stop').
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Prior to this, sending a v1 address (or, in fact, any random crap!)
would cause the unsupporting node to unilaterally close.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: lightningd: experimental-shutdown-wrong-funding to allow remote nodes to close incorrectly opened channels.
Changelog-Added: JSON-RPC: close has a new `wrong_funding` option to try to close out unused channels where we messed up the funding tx.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
For compatibility, we only do this if `allow-deprecated-apis` is false
for now. Otherwise scripts parsing should use `grep -v '^# '` or
start using `-N none`.
Changelog-Added: JSON-RPC: `close` now sends notifications for slow closes (if `allow-deprecated-apis`=false)
Changelog-Deprecated: cli: scripts should filter out '^# ' or use `-N none`, as commands will start returning notifications soon
Fixes: #3925
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The idea is that you regenerate the man pages in the same commit you
alter them: that's how we know whether to try regenerating them or not
(git doesn't store timestamps, so it can't really tell).
Travis will now check this, so force them all to sync to this commit.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
mrkd started enforcing the `name -- short description` style of top-level
headings somewhere, and was thus failing to build the man-pages. I swapped
the title and with the existing short description to make it work
again. `mrkd` will automatically infer the section from the filename so no
need to put it in the title as well.
In addition I removed the "last updated" lines at the bottom since they are
out of date at best, and misleading at the worst. If we want to keep them, I'd
suggest generating them from the commit that last touched them.
