Requiring the caller to allocate them is ugly, and differs from
other types.
This means we need a context arg if we don't have one already.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
No more "towire_offer", but "towire_tlv_offer".
This means we double-up on the unfortunately-named `tlv_payload` inside
the onion, but we should rename that in the spec when we remove
old payloads.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In particular, this changes the name of a field in invoice_request:
`payer_signature` becomes simply `signature`. So we allow both for
now, and send the old one unless deprecated_apis is disabled.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And turn "" includes into full-path (which makes it easier to put
config.h first, and finds some cases check-includes.sh missed
previously).
config.h sets _GNU_SOURCE which really needs to be done before any
'#includes': we mainly got away with it with glibc, but other platforms
like Alpine may have stricter requirements.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As of 2b923a0367c5f9154fcec706e3302cc4658dd889.
Recurrence quotes need to be marked separately, since they're no longer
in offers main bolt.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's very similar to the previous, but there are a few changes:
1. The enctlv fields are numbered differently.
2. The message itself is a different number.
The onionmsg_path type is the same, however, so we keep that constant
at least.
The result is a lot of cut & paste, but we will delete the old one
next release.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Temporarily disable sendpay_blinding test which uses obsolete onionmsg;
there's still some debate on the PR about how blinded HTLCs will work.
Changelog-EXPERIMENTAL: onionmessage: removed support for v0.10.1 onion messages.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We keep the now-removed chains field, and in deprecated mode, we set it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: bolt12: `chains` in invoice_request and invoice is deprecated, `chain` is used instead.
Main changes are:
1. Uses point32 instead of pubkey32.
2. Uses issuer instead of vendor.
3. Uses byte instead of u8.
4. blinded_path num_hops is now a byte, not u16 (we don't use that yet!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: bolt12: `vendor` is deprecated: the field is now called `issuer`.
This comes in via the onion_message_ourpath hook, and we identify the
path by checking the node alias it came to (vs the obsolete version
which used the blinding).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We had sent->path be a list of node_ids, but it makes more sense as
pubkeys so we can avoid conversion. Also, I find it easier to think
about (especially creating backwards paths) if we include *ourselves*
as the first element in the path.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
sendonionmessage is going to be the new one, and do much *less*.
As this is an internal experimental-only API, no deprecation cycle
required.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
offers contain an x-only pubkey: to route to them to need to know the
02 vs 03 prefix. If they're in the gossmap it's easy, but if they're
a directly-connected peer it's harder. We used to have
sendonionmessage tweak the key if it found a peer with the matching
key, but this was always a hack.
It turns out that we try to connect to the node anyway, which is
a noop if it's already connected. So try connecting to the other
parity if the first one fails.
Also, this registers when we fail to connect, and returns an error
rather than waiting for timeout.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Before:
Ten builds, laptop -j5, no ccache:
```
real 0m36.686000-38.956000(38.608+/-0.65)s
user 2m32.864000-42.253000(40.7545+/-2.7)s
sys 0m16.618000-18.316000(17.8531+/-0.48)s
```
Ten builds, laptop -j5, ccache (warm):
```
real 0m8.212000-8.577000(8.39989+/-0.13)s
user 0m12.731000-13.212000(12.9751+/-0.17)s
sys 0m3.697000-3.902000(3.83722+/-0.064)s
```
After:
Ten builds, laptop -j5, no ccache: 8% faster
```
real 0m33.802000-35.773000(35.468+/-0.54)s
user 2m19.073000-27.754000(26.2542+/-2.3)s
sys 0m15.784000-17.173000(16.7165+/-0.37)s
```
Ten builds, laptop -j5, ccache (warm): 1% faster
```
real 0m8.200000-8.485000(8.30138+/-0.097)s
user 0m12.485000-13.100000(12.7344+/-0.19)s
sys 0m3.702000-3.889000(3.78787+/-0.056)s
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We don't automatically *reject* an invoice which asks for a different
msat than we specified (caller may!), but we don't bother noting it
unless it is different.
Reported-by: @shesek
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
@shesek points out that we called this field created_at in bolt11 decode,
which makes more sense anyway.
Changelog-EXPERIMENTAL: bolt12 decode `timestamp` field deprecated in favor of new name `created_at`.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We usually assume we're fetching an invoice we are going to pay, so we
look up the previous payment for the payer key, and other sanity
checks.
This adds a developer option to fetchinvoice, which allows it to force
its own payer key, which it uses to sign directly and bypasses these
checks.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We don't do it for sendinvoice (yet?).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: `fetchinvoice` can take a payer note, and `listinvoice` will show the payer_notes received.
100+ is for experimentation, modern spec practice is to assign feature bits
sequentially as PRs get added, to avoid later renumbering.
Still respect the old bit for now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This also adds a `fetchinvoice-noconnect` option to suppress it too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: `fetchinvoice` and `sendinvoice` will connect directly if they can't find an onionmessage route.
Fixes: #4624
The fetchinvoice and offers plugins disable themselves if the option
isn't enabled (it's enabled by default on EXPERIMENTAL_FEATURES).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: `experimental-offers` enables fetch, payment and creation of (early draft) offers.
As per lastest revision of the spec, we can specify amounts in invoice
requests even if the offer already specifies it, as long as we exceed
the amount given. This allows for tipping, and amount obfuscation.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Using onionmessage hook, we get the response and either present it
to the user (invoice) or return the error to the user.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
