This avoids some very ugly switch() statements which mixed the two,
but we also take the chance to rename 'towire_gossip_' to
'towire_gossipd_' for those inter-daemon messages; they're messages to
gossipd, not gossip messages.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We spend quite a bit of time in libsecp256k1 moving them to and from
DER encoding. With a bit of care, we can transfer the raw bytes from
gossipd and manually decode them so a malformed one can't make us
abort().
Before:
real 0m0.629000-0.695000(0.64985+/-0.019)s
After:
real 0m0.359000-0.433000(0.37645+/-0.023)s
At this point, the main issues are 11% of time spent in ccan/io's
backend_wake (I tried using a hash table there, but that actually makes
the small-number-of-fds case slower), and 65% of gossipd's time is
in marshalling the response (all those tal_resize add up!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Such an API is required for when we stream it directly. Almost all our
handlers fit this pattern already, or nearly do.
We remove new_json_result() in favor of explicit json_stream_success()
and json_stream_fail(), but still allowing command_fail() if you just
want a simple all-in-one fail wrapper.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's the only user of them, and it's going to get optimized.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
gossip.pydiff --git a/common/test/run-json.c b/common/test/run-json.c
index 956fdda35..db52d6b01 100644
We initialize it to 30 seconds, but it's *always* overridden by the
gossip_init message (and usually to 60 seconds, so it's doubly
misleading).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Gossipd provided a generic "get endpoints of this scid" and we only
use it in one place: to look up htlc forwards. But lightningd just
assumed that one would be us.
Instead, provide a simpler API which only returns the peer node
if any, and now we handle it much more gracefully.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And use ARRAY_SIZE() everywhere which will break compile if it's not a
literal array, plus assertions that it's the same length.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
For routeboost, we want to select from all our enabled channels with
sufficient incoming capacity. Gossipd knows which are enabled (ie. we
have received a `channel_update` from the peer), but doesn't know the
current incoming capacity.
So we get gossipd to give us all the candidates, and lightningd
selects from those.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
BOLT 7's been updated to split the flags field in `channel_update`
into two: `channel_flags` and `message_flags`. This changeset does the
minimal necessary to get to building with the new flags.
We couldn't use it before because it asserted dbid was non-zero. Remove
assert and save some code.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Header from folded patch 'fixup!_lightningd__use_hsm_get_client_fd()_helper_for_global_daemons_too.patch':
fixup! lightningd: use hsm_get_client_fd() helper for global daemons too.
Suggested-by: @ZmnSCPxj
That matches the other CSV names (HSM was the first, so it was written
before the pattern emerged).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The `json_tok_percentage` parser is used for the `fuzzpercent` in `getroute` and
`maxfeepercent` in `pay`. In both cases it seems reasonable to allow values
larger than 100%. This has bitten users in the past when they transferred single
satoshis to things like satoshis.place over a route longer than 2 hops.
We would never complete further ping commands if we had < responses
than pings. Oops.
Fixes: #1928
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This was a very simple change and allowed us to remove the special
`json_opt_tok` macro.
Moved the callback out of `common/json.c` to `lightningd/json.c` because the new
callbacks are dependent on `struct command` etc.
(I already started on `json_tok_number`)
My plan is to:
1. upgrade json_tok_X one a time, maybe a PR for each one.
2. When done, rename macros (i.e, remove "_tal").
3. Remove all vestiges of the old callbacks
4. Add new callbacks so that we no longer need json_tok_tok!
(e.g., json_tok_label, json_tok_str, json_tok_msat)
Signed-off-by: Mark Beckwith <wythe@intrig.com>
We used to just manually set ROUTING_FLAGS_DISABLED, but that means we
then suppressed the real channel_update because we thought it was a
duplicate!
So use a local flag: set it for the channel when the peer disconnects,
and clear it when channeld sends a local update.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This patch guts gossipd of all peer-related functionality, and hands
all the peer-related requests to channeld instead.
gossipd now gets the final announcable addresses in its init msg, since
it doesn't handle socket binding any more.
lightningd now actually starts connectd, and activates it. The init
messages for both gossipd and connectd still contain redundant fields
which need cleaning up.
There are shims to handle the fact that connectd's wire messages are
still (mostly) gossipd messages.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
connectd has a dedicated fd to gossipd, so it can ask for a new gossip_fd
for a peer.
gossipd has a standalone routine to create a remote peer (this will
eventually be the only way gossipd creates a new peer).
For now lightningd creates a socketpair but doesn't run connectd, so
gossipd never sees any requests on this fd.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
connect_control.c, dev_ping.c, gossip_control.c, invoice.c.
This converts about 50% of all calls of `json_get_params` to `param`.
After trying (and failing) to squash and rebase #1682 I just made a new branch
from a patch file and closed#1682.
Signed-off-by: Mark Beckwith <wythe@intrig.com>
I crashed the HSMD, and it gave no output at all. That's because we
were only reading the status fd when we were waiting for a reply.
Fix this by using a separate request fd and status fd, which also means
that hsm_sync_read() is no longer required.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We need this later, to generate its seed. When we switch to lnd's key system,
we'll only need this, and not peerid.
Note also that the peerid is not just for messages any more, too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Compares the `blocknum` in the `short_channel_id` with the range of blocks we
store in the database and abort if we should have known about it. Avoids
bombarding `bitcoind` with requests for channels that have already been spent or
were invalid in the first place.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Since we currently only (ab)use it to send everything, we need a way to
generate boutique queries for testing.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We're telling gossipd about disconnections anyway, so let's just use that signal
to disable both sides of the channel.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This was failing some of our integration tests, i.e., the ones closing a channel
and not waiting for sigexchange. The remote node would often not be quick enough
to send us its disabling channel_update, and hence we'd still remember the
incoming direction. That could then be sent out as part of an invoice, and fail
subsequently. So just set both directions to be disabled and let the onchain
spend clean up once it happens.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Until now, `command_fail()` reported an error code of -1 for all uses.
This PR adds an `int code` parameter to `command_fail()`, requiring the
caller to explicitly include the error code.
This is part of #1464.
The majority of the calls are used during parameter validation and
their error code is now JSONRPC2_INVALID_PARAMS.
The rest of the calls report an error code of LIGHTNINGD, which I defined to
-1 in `jsonrpc_errors.h`. The intention here is that as we improve our error
reporting, all occurenaces of LIGHTNINGD will go away and we can eventually
remove it.
I also converted calls to `command_fail_detailed()` that took a `NULL` `data`
parameter to use the new `command_fail()`.
The only difference from an end user perspecive is that bad input errors that
used to be -1 will now be -32602 (JSONRPC2_INVALID_PARAMS).
This resolves the problem where both channeld and gossipd can generate
updates, and they can have the same timestamp. gossipd is always able
to generate them, so can ensure timestamp moves forward.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
