These tests appear in both test_misc.py and test_wallet.py.
I checked, and they're the only duplcates; they were moved in
0543149b89 then re-added (merge error?)
in 67fc8ffbcf.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
First, simplify: amount is set to 1000000, but then we deposit 1000000 + 0.01btc
(i.e. 2000000), and we always use 2 * amount. Just use a single constant to
make it clear.
Secondly, we assume that the wallet considers outputs spent as soon as
we created the tx: this will not be true once withdraw uses sendpsbt.
So, we generate blocks, but now sometimes withdraw will pick up change
txs, so we need to reserve them to avoid that messing our coinmovements.
Finally, we assumed the withdrawl order was BIP69, which becomes
variable.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a little lazy, but simpler than extracting the common parts
or making withdraw a plugin which calls txprepare (which should be
deprecated soon in favor of fundpsbt etc).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Marking spent means if the transaction doesn't confirm for some
reason, the user will need to force a rescan to find the funds. Now
we have timed reservations, reserving for (an additional) 12 hours
should be sufficient.
We also take this opportunity (now we have our own callback path)
to record the tx in the wallet only on success.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Some minor phrasing differences cause test changes.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: txprepare reservations stay across restarts: use fundpsbt/reservepsbt/unreservepsbt
Changelog-Removed: txprepare `destination` `satoshi` argument form removed (deprecated v0.7.3)
This uses `fundpsbt` and similar to simulate the txprepare command.
It has one difference (when complete), in that it those reservations
are now timed and don't get reset on restart.
It also doesn't have the restriction that `all` can only be used with
no other output, as I didn't realize that when I implemented it!
Note that change is now inserted in a random position, not sorted
into BIP69 order.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If all is set, diff may not be:
==1230518== Use of uninitialised value of size 8
==1230518== at 0x4C5781B: _itoa_word (_itoa.c:179)
==1230518== by 0x4C736F4: __vfprintf_internal (vfprintf-internal.c:1687)
==1230518== by 0x4C88119: __vsnprintf_internal (vsnprintf.c:114)
==1230518== by 0x1D44B6: do_vfmt (str.c:66)
==1230518== by 0x1D45A0: tal_vfmt_ (str.c:92)
==1230518== by 0x1D4401: tal_fmt_ (str.c:44)
==1230518== by 0x15D30F: fmt_amount_sat (amount.c:60)
==1230518== by 0x15D338: fmt_amount_sat_ (amount.c:62)
==1230518== by 0x178C45: type_to_string_ (type_to_string.c:35)
==1230518== by 0x1B8F75: json_fundpsbt (reservation.c:394)
==1230518== by 0x12D0EC: command_exec (jsonrpc.c:602)
==1230518== by 0x12D598: rpc_command_hook_callback (jsonrpc.c:712)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This avoids overwriting the ones in git, and generally makes things neater.
We have convenience headers wire/peer_wire.h and wire/onion_wire.h to
avoid most #ifdefs: simply include those.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We're going to make experimental versions of these completely separate files.
Also remove the dependency on the Makefile itself: it simply causes
unnecessary churn. We can always force-rebuild when we change a rule.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This will make the `openchannel_hook` chainable. Logic is as follows:
- The first plugin that rejects terminates the chain
- If more than one plugin uses the `close_to` parameter, take the first
value and log_unusual for the others.
Changelog-Added: openchannel_hook is now chainable
It is not part of the default documentation generation, thus will show up in
the git diff every time a maintainer-clean is done. We could also add it to
the default documentation generation, however it requires some rather
heavy-weight latex dependencies, and the file hasn't changed in several years.
Since we started committing generated files as well we can mark them as
derived so that they appear collapsed in the diff, reducing noise while
reviewing.
Generating these requires python tooling which may not be present, so only
clean them in maintainer mode. Also remove `wallet/statements.po` which is no
longer used or generated at all.
PR #3957 improved performance considerably, however we still look over the
entire message for the message separator. If instead we just look in the
incrementally read data, we remove the quadratic behavior for large messages.
This is safe since we then loop over the messages which would drain any
message separator from the buffer before we attempt the next read.
Changelog-Fixed: bcli: Significant speedups for block synchronization
We're not going to mutate transactions in a block, so computing the txids
every time we need them is a waste, let's compute them upfront and use them
afterwards.
We were using `tal_fmt` to truncate off the last byte of the
response (newline), which required an allocation, a call to `vsnprintf` and a
copy of the block contents. This being >2MB in size on mainnet was rather
expensive.
We now just signal the end of the string by overwriting the trailing newline,
and stealing directly onto the result.
We have to handle singletons which are arrays of variable-length entries:
this needs to be a ptr-to-ptr.
```C
struct blinded_payinfo {
u32 fee_base_msat;
u32 fee_proportional_millionths;
u16 cltv_expiry_delta;
u8 *features;
};
```
Before:
```C
struct tlv_invoice_tlvs {
...
struct blinded_payinfo *blindedpay;
```
After:
```C
struct tlv_invoice_tlvs {
...
struct blinded_payinfo **blindedpay;
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
has_len_fields() doesn't cover our blacklist of variable types, so if
we have an array of them, this logic is wrong. This happens in the
the bolt13 patch:
```C
struct tlv_offer_tlvs_blindedpath {
struct pubkey blinding;
struct onionmsg_path **path;
};
```
Before:
wire/gen_bolt13_tlv.c:
```C
for (size_t i = 0; i < tal_count(r->blindedpath->path); i++)
towire_onionmsg_path(&ptr, r->blindedpath->path + i);
```
After:
```C
for (size_t i = 0; i < tal_count(r->blindedpath->path); i++)
towire_onionmsg_path(&ptr, r->blindedpath->path[i]);
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
With a feerate of 7500perkw and subtracting 660 sats for anchors, a
20,000 sat channel has capacity about 9800 sat, below our default:
You gave bad parameters: channel capacity with funding 20000sat, reserves 546sat/546sat, max_htlc_value_in_flight_msat is 18446744073709551615msat, channel capacity is 9818sat, which is below 10000000msat
So bump channel amounts.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And document exactly what it does: insist that an HTLC can pass of
this value (module assumptions of feerate).
Note that we remove the "is_opener" test from the capacity calculation
for anchor fees: it doesn't matter which side it is, someone has to pay
for anchor fees to it deducts from capacity.
This change breaks the test, which we rewrite.
Changelog-Changed: config: `min-capacity-sat` is now stricter about checking usable capacity of channels.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This tests our instructions in INSTALL.md, which say you only need
requirements.txt for development or running tests, not building.
Also removes the unused SOURCE_CHECK_ONLY flag.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Otherwise make thinks we're done, and we can get errors. Include
primitive code if we abort build halfway and leave .refresh-submodules dir.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
```
make: *** No rule to make target 'external/gheap/gheap.h', needed by 'bitcoin/chainparams.o'. Stop.
make: *** Waiting for unfinished jobs....
```
Just simplify the Makefile to make all the external headers we use
dependent on submodcheck.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
