Clean restart of daemon after a tx-abort is a nice way to work around
the 'persistent' disconnect that we t-bast noticed.
Changelog-Fixed: `dualopend`: Fix behavior for tx-aborts. No longer hangs, appropriately continues re-init of RBF requests without reconnction msg exchange.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `setchannel` adds a new `ignorefeelimits` parameter to allow peer to set arbitrary commitment transaction fees on a per-channel basis.
We usually have access to `ld`, so avoid the global.
The only place generic code needs it is for the json command struct,
and that already has accessors: add one for libplugin and lightningd
to tell it if deprecated apis are OK.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In most cases, it's the same as option_anchor_outputs, but for
fees it's different. This transformation is the simplest:
pass it as a pair, and test it explicitly.
In future we could rationalize some paths, but this was nice
and mechanical.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We were seeing hangs in disconnect in
tests/test_connection.py::test_feerate_stress, and looking at the logs
it's because we're not actually telling connectd to disconnect.
These days, we have a connect counter, so connectd knows to ignore it
if we simply haven't read the message about it already disconnecting.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a regression that we introduced in this release
due to some dirty parts of our codebase.
For historical reasons (I think), we were using a `json_add_sat_only`
procedure defined in `peer_control.c`. So when @rustyrussell removed the _msat,
we thought that all the fields were reflecting the new behavior, but
we were wrong.
This PR fixes this bug and also removes the additional function
from `peer_control.c`. This way, we can be sure that there is no other part
of our codebase that uses this method (except for other `json_add` methods).
Link: https://github.com/ElementsProject/lightning/issues/6244
Reported-by: @hMsats
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
I tested this indeed breaks if we don't accept it, then implemented
the code to accept it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: protocol: We now correctly accept the `option_scid_alias` bit in `open_channel` `channel_type`.
Changelog-Deprecated: protocol: Not setting `option_scid_alias` in `option_channel` `channel_type` for unannounced channels.
Fun story. We're changing onchaind to hand txs to us, and we will
construct them and do the broadcast for it. lightningd tells onchaind
the witness it used (with flags to indicate which fields were
signatures so should be ignored) so onchaind can recognize the tx
when/if it is mined.
And when onchaind was waiting for a CLTV delay, it wouldn't tell
lightningd yet, but wait until the parent was sufficiently deep
But this caused bugs!
In particular, on replay, onchaind would see transactions which it
hasn't sent yet. This was not a problem before, as onchaind had
created the tx, even if it hadn't told lightningd to broadcast it, so
recognized the variant when it came in. When we're relying on
lightningd to tell us what the tx will look like, this doesn't work
any more.
The cause of this is that we fire off txowatches ("this output was
spent!") while we process blocks, and only fire off txwatches ("this
tx increased depth") once all the current blocks are processed. Often
this didn't matter, since we replay messages to onchaind from the
database, *but* we trim the last few blocks on restart (or, if there's
a small reorg while we're stopped), and we can hit this misordering.
Changing our topology code to only ever process one block at a time
would be a solution, but slows down catchup (and tests, where we often
mine a run of blocks).
So, this seems like a premature optimization, but it's really
required! And in future, lightningd can use this knowledge of pending
transactions to combine them in more clever ways.
Note that if a tx is valid at block N, we broadcast it once we see
block N-1, to get it in the mempool for block N.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Libwally update breaks compatibility, so
we do this in one large step.
Changelog-Changed: JSON-RPC: elements network PSET now only supports PSETv2.
Changelog-Added: JSON-RPC: PSBTv2 supported for fundchannel_complete, openchannel_update, reserveinputs, sendpsbt, signpsbt, withdraw and unreserveinputs parameter psbt, openchannel_init and openchannel_bump parameter initialpsbt, openchannel_signed parameter signed_psbt and utxopsbt parameter utxopsbt
At the moment only lightingd needs it, and this avoids missing any
places where we do bip32 derivation.
This uses a hsm capability to mean we're backwards compatible with older
hsmds.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: we now always double-check bitcoin addresses are correct (no memory errors!) before issuing them.
It's needed as the db and wallet is being set up (db migrations), so
it's simpler this way to always use ld->bip32_base for the next patch.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
These were deprecated in v0.12.0, hence scheduled for removal next version anyway
(use local_fund_msat and remote_funds_msat).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We keep the node_id, not a pointer to the peer.
This also means that it might have reconnected while we were in the hook, so make
sure we ignore the result if it's in state PEER_CONNECTED.
And remove the `tal_steal(peer, hook_payload)` which doesn't do anything: the
plugin_hook call steals hook_payload anyway!
Fixes: #5944
This will save a lot of RPC ping/pong when plugins still need to iterate
both, `listpeers` and `listpeerchannels`. When `num_channels` is 0 they
can skip additional calls.
Changelog-Added: RPC `listpeers` output now has `num_channels`.
In v0.11 (71f736678f) we changed lightningd to wait for gossipd to
acknowledge blocks before updating blockheight: this resolved a problem
which lnprototest had where it wanted to know when we'd fully digested
a block.
However, it broke the syncing case: until then we don't even tell
gossipd, so this stayed at zero. We should use the current blockheight
for that corner case!
Fixes: #5894
Changelog-Fixed: JSON-RPC: `getinfo` `blockheight` no longer sits on 0 while we sync with bitcoind the first time.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
When a channel open fails, we use tx-abort instead of warning/error.
This means that the peer won't disconnect! And instead when a new
message arrives, we'll need to rebuild the dualopend subd (if missing).
Makes opens a bit easer to retry (no reconnect needed), as well as keeps
the connection alive for other channels we may have with that peer.
Changelog-Changed: Experimental-Dual-Fund: open failures don't disconnect, but instead fail the opening process
There were cases where address it's empty, and this cases are not right if the
field is considered optional.
This makes it required and add the field also when `--offline` is set.
Changelog-Changed: JSON-RPC: `getinfo` `address` array is always present (though may be empty)
We didn't actually populate them properly, and the real annotations
are on inputs and outputs.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: JSON-RPC: `listtransactions` `channel` and `type` field removed at top level.
This will give the user an option to set a custom port when using
discovered IPs for node_announcents. Without this, only the selected
networks default port can used.
Changelog-Added: Adds --announce-addr-discovered-port config option to set custom port for IP discovery.
This switch was not doing anything useful anymore.
We deprecate it anyways to notify the user about the new switch.
Changelog-Deprecated: The old --disable-ip-discovery config switch
After connecting 100,000 peers with one channel each (not all at
once!), we see various places where we exhibit O(N^2) behaviour.
Fix these by keeping a map of id->peer instead of a simple
linked-list.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: new command `listpeerchannels` now contains information on direct channels with our peers.
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
We're soon going to call json_add_unsaved_channel and
json_add_uncommitted_channel from a new place, where we want the peer
state directly included.
Based on patch by @vincenzopalazzo.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If we both support large channels, we can actually send giant HTLCs.
This, in turn, fixes pay (which relies on this field!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: Plugins: `pay` now knows it can use locally-connected wumbo channels for large payments.
Fixes: #5250Fixes: #5417
First, merge the _ahf_ and non-ahf interfaces.
Second, remove the always-NULL txs->cmd field.
Then, add optional id_prefix for bitcoind_sendrawx, so if it's
triggered by a command (e.g. "withdraw") it's shown correctly in logs.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is cleaner because, the `remote_addr` and `discovered_ip` are
related but two different things.
Within connectd and lightningd we use the peers `remote_addr` feature
to validate (and guess a port) to be used for IP discovery.
Also when a peer reports us a `remote_addr`, this is given to the plugin API
via the `peer_connected` hook. The network port here is not modified for
godd reason! This can be used i.e. to detect if we are behind a NAT.
But once lightningd figures enough peers report the same `remote_addr`,
it sets the port to the selected network and tells gossipd to use that for
`node_announcement` updates.
Hence, within gossipd, there is no (should not be) `remote_addr`.
Changelog-None
This includes the recommendation that we use 10 minute grace period,
so add quotes to where we use that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
