There are hardly any lightningd-specific JSON functions: all that's left
are the feerate ones, and there's already a comment that we should have
a lightningd/feerate.h.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We have them split over common/param.c, common/json.c,
common/json_helpers.c, common/json_tok.c and common/json_stream.c.
Change that to:
* common/json_parse (all the json_to_xxx routines)
* common/json_parse_simple (simplest the json parsing routines, for cli too)
* common/json_stream (all the json_add_xxx routines)
* common/json_param (all the param and param_xxx routines)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
They're not logically connected: we can know where they wanted to
go, but we didn't send it.
Where possible, it's the scid *they asked for*; otherwise, it's the
scid or fallback to the alias, but do this in the *caller*, not by
overriding inside wallet_forwarded_payment_add.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Not only can the outgoing edge be a zeroconf channel, it can also be
the incoming channel. So we revert to the usual trick of using the
local alias if the short_channel_id isn't known yet.
We use the LOCAL alias instead of the REMOTE alias even though the
sender likely used the REMOTE alias to refer to the channel. This is
because we control the LOCAL alias, and we keep it stable during the
lifetime of the channel, whereas the REMOTE one could change or not be
there yet.
`alias_local` is generated locally and sent to the peer so it knows
what we're calling the channel, while `alias_remote` is received by
the peer so we know what to include in routehints when generating
invoices.
We had json_add_amount_msat_only(), which was designed to be used to
print out msat fields, if we had sats.
However, we misused it, so split it into the three different cases:
1. json_add_amount_sat_msat: We are using it correctly, with a field called
xxx_msat.
2. json_add_amount_sats_deprecated: We were using it wrong, so deprecate
the old field and create a new one which does end in _msat.
3. json_add_sats: we were using it to hand sats as a JSON parameter to an
interface, where "XXXsat".
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: Plugins: `rbf_channel` and `openchannel2` hooks `their_funding` (use `their_funding_msat`)
Changelog-Deprecated: Plugins: `openchannel2` hook `dust_limit_satoshis` (use `dust_limit_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `funding_satoshis` (use `funding_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `dust_limit_satoshis` (use `dust_limit_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `channel_reserve_satoshis` (use `channel_reserve_msat`)
Changelog-Deprecated: Plugins: `channel_opened` notification `amount` (use `funding_msat`)
Changelog-Deprecated: JSON-RPC: `listtransactions` `msat` (use `amount_msat`)
Changelog-Deprecated: Plugins: `htlc_accepted` `forward_amount` (use `forward_msat`)
Per BIP-0171, the signature map is of pubkey to "The signature as would
be pushed to the stack from a scriptSig or witness".
Fixes 5298
Changelog-Fixed: PSBT: Fix signature encoding to comply with BIP-0171.
Signed-off-by: Jon Griffiths <jon_p_griffiths@yahoo.com>
Make it always a number; this makes the JSON request specification
simpler. We allowed a number since v0.10.1.
(reserve=True is the default anyway, so usually it can be omitted:
reserve=False becomes reserve=0).
Changelog-Deprecated: JSON-RPC: `fundpsbt`/`utxopsbt` `reserve` must be a number, not bool (for `true` use 72/don't specify, for `false` use 0). Numbers have been allowed since v0.10.1.
Regenerate from current BOLTS via `make extract-bolt-csv`
1. The remote_addr field was added manually into peer_wire.csv: this
needs to be a patch otherwise it vanishes on regen.
2. We never brought into the channel_disabled fields, because it was
too much hassle (we never actually generate this!). Do it now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Suggested-by: @t-bast
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `listforwards` has new entry `style`, currently "legacy" or "tlv".
Means that field is now optional in JSON output.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `delinvoice` has a new parameter `desconly` to remove description.
It was tlv_fields_valid that wanted a non-const: now that's gone, we
can make this correctly const.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
More efficient to search a known peer than the whole set.
Also, move find_channel_by_id() from channel_control.c into channel.c
where we'd expect it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Sure, we want to connect (usually) because of an active channel, but
it's not specific to the channel itself.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rather than intuiting whether this is a new channel / active channel,
use the channel_id. This simplifies things and makes them explicit,
and prepares for multiple live channels per peer.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Now we always have it (either extracted from an unsolicited message,
or told to us by lightningd when it tells us it wants to talk), we can
always send it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We don't need to hand it to channeld: it will read it! We simply
need to tell it to expect it.
Similarly, openingd/dualopend will never see it, so remove that logic.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Either because lightningd tells us it wants to talk, or because the peer
says something about a channel.
We also introduce a behavior change: we disconnect after a failed open.
We might want to modify this later, but we it's a side-effect of openingd
not holding onto idle connections.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The message from lightningd simply acknowleges that we are allowed to
discard the peer (because no subdaemons are talking to it anymore).
This difference becomes more stark once connectd holds on to idle
peers.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Suggested by @m-schmook, I realized that if we append it later I'll
never get it right: I expect parameters min and max, not max and min!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: you can now alter the `htlc_minimum_msat` and `htlc_maximum_msat` your node advertizes.
As per proposal in https://github.com/lightning/bolts/pull/962
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Removed: protocol: support for legacy onion format removed, since everyone supports the new one.
This is the cheapest algo I came up with that simply checks that the
same `remote_addr` has been report by two different peers. Can be
improved in many ways:
- Check by connecting to a radonm peers in the network
- Check for more than two confirmations or a certain fraction
- ...
Changelog-Added: Send updated node_annoucement when two peers report the same remote_addr.
Instead of doing this weird chaining, just call them all at once and
use a reference counter.
To make it simpler, we return the subd_req so we can hang a destructor
off it which decrements after the request is complete.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There is no "wallet_lib_headers" variable in wallet/Makefile
Likewise, there were two "lightningd_headers", a couple of unused
variables and some other nonsene in lightningd/Makefile
