We don't use it yet, but now we'll decode correctly.
See: https://github.com/lightningnetwork/lightning-rfc/pull/317
lightning-rfc commit: ef053c09431442697ab46e83f9d3f86e3510a18e
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The filter is being populated while initializing the daemon and by
adding new keys as they are being generated. The filter is then used
in connect_block to identify transactions of interest.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
The wire protocol uses this, in the assumption that we'll never see feerates
in excess of 4294967 satoshi per kiloweight.
So let's use that consistently internally as well.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Test objects must be added to $(ALL_OBJS) so they correctly depend on
CCAN headers etc.
Also, each test in a subdir must depend on headers and src in the parent
directory, as it will often #include them directly.
Reported-by: Christian Decker
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
All the callers need to pass it in: currently channeld and openingd just
fake it by copying the payment point.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We save location where transaction was started, in case we try to nest.
There's now no error case; db_exec_mayfail() is the only one.
This means the tests need to override fatal() if they want to intercept
these errors.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a subset of a "bitcoind: wrap callbacks in transaction." from
the everything-in-transaction branch, but we need the ld pointer now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a bit messier than I'd like, but we want to clearly remove all
dev code (not just have it uncalled), so we remove fields and functions
altogether rather than stub them out. This means we put #ifdefs in callers
in some places, but at least it's explicit.
We still run tests, but only a subset, and we run with NO_VALGRIND under
Travis to avoid increasing test times too much.
See-also: #176
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It makes it impossible to embed an ipaddr in another structure, since we
always try to skip over any zeroes, which may swallow a following field.
Do the skip specially for the case where we're parsing routing messages:
we never use padding for our own internal messages anyway.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Now the flow is much simpler from a lightningd POV:
1. If we want to connect to a peer, just send gossipd `gossipctl_reach_peer`.
2. Every new peer, gossipd hands up to lightningd, with global/local features
and the peer fd and a gossip fd using `gossip_peer_connected`
3. If lightningd doesn't want it, it just hands the peerfd and global/local
features back to gossipd using `gossipctl_handle_peer`
4. If a peer sends a non-gossip msg (eg `open_channel`) the gossipd sends
it up using `gossip_peer_nongossip`.
5. If lightningd wants to fund a channel, it simply calls `release_channel`.
Notes:
* There's no more "unique_id": we use the peer id.
* For the moment, we don't ask gossipd when we're told to list peers, so
connected peers without a channel don't appear in the JSON getpeers API.
* We add a `gossipctl_peer_addrhint` for the moment, so you can connect to
a specific ip/port, but using other sources is a TODO.
* We now (correctly) only give up on reaching a peer after we exchange init
messages, which changes the test_disconnect case.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. Remove reference to old $(LIGHTNINGD_OLD_LIB_OBJS) var (in handshaked too).
2. Make check depend directly on unit tests, insteadof weird lightningd/tests
variable.
3. check-source-bolt and check-whitespace are automatic for $(ALL_TEST_PROGRAMS)
so we don't need them here.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
To reproduce the next bug, I had to ensure that one node keeps thinking it's
disconnected, then the other node reconnects, then the first node realizes
it's disconnected.
This code does that, adding a '0' dev-disconnect modifier. That means
we fork off a process which (due to pipebuf) will accept a little
data, but when the dev_disconnect file is truncated (a hacky, but
effective, signalling mechanism) will exit, as if the socket finally
realized it's not connected any more.
The python tests hang waiting for the daemon to terminate if you leave
the blackhole around; to give a clue as to what's happening in this
case I moved the log dump to before killing the daemon.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The next patch includes wire/peer_wire.h and causes a compile error
as lightningd/gossip_control.c defined its own gossip_msg function.
New names are clearer.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
So far we always needed to know the public key, which was not the case
for addresses that we don't own. Moving the hashing outside of the
script construction allows us to send to arbitrary addresses. I also
added the hash computation to the pubkey primitives.
Means caller has to do some more work, but this is closer to what we want:
we're going to want to send them to the master daemon for atomic commit.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We use a file descriptor, so when we consume an entry, we move past it
(and everyone shares a file offset, so this works).
The file contains packet names prefixed by - (treat fd as closed when
we try to write this packet), + (write the packet then ensure the file
descriptor fails), or @ ("lose" the packet then ensure the file
descriptor fails).
The sync and async peer-write functions hook this in automatically.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Header from folded patch 'test-run-cryptomsg__fix_compilation.patch':
test/run-cryptomsg: fix compilation.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We alternated between using a sha256 and using a privkey, but there are
numerous places where we have a random 32 bytes which are neither.
This fixes many of them (plus, struct privkey is now defined in terms of
struct secret).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Mainly switching from the old include to the new include and adjusting
the actual size of the onion packet. It also moves `channel.c` to use
`struct hop_data`.
It introduces a dummy next hop in `channel.c` that will be replaced in
the next commit.
This moves all the non-legacy blackbox testing into python.
Before:
real 10m18.385s
After:
real 9m54.877s
Note that this doesn't valgrind the subdaemons: that patch seems to cause
some issues in the python framework which I am still chasing.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This fails on the old dev-restart tests, so we need to only enable it
for the new tests:
rusty@rusty-XPS-13-9360:~/devel/cvs/lightning (guilt/ping-pong)$ daemon/test/test-basic --restart --verbose
...
{ }
RESTARTING
dev-restart failed!
valgrind: mmap(0x38000000, 2265088) failed in UME with error 22 (Invalid argument).
valgrind: this can be caused by executables with very large text, data or bss segments.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is an approximate result (it's only our confirmed balance, not showing
outstanding HTLCs), but it gives an easy way to check HTLCs have been
resolved.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We call channel_sent_commit *before* sending (so we know if we need
to), so the name is wrong. Similarly channel_sent_revoke_and_ack.
We can usefully have them tell is if there is outstanding work to do,
too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Passing through 'struct peer *' was a layering violation.
Reported-by: Christian Decker <decker.christian@gmail.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The three cases we care about only happen on specific transitions:
1. They can no longer spend our failed HTLC: we can fail the source now.
2. They are fully committed to their new HTLC htlc: we can forward now.
3. They can no longer timeout their fulfilled HTLC: the funds are ours.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Now we correctly use the remote revocation basepoint, we need to set
it in run-channel (instead of the local revocation basepoint).
We also update all the comments, as per (pending) spec commit:
https://github.com/lightningnetwork/lightning-rfc/pull/137
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This was included in the lightningnetwork/lightning-rfc#105 update
to the test vectors, and it's a good idea. Takes a bit of work to
calculate (particularly, being aware of rounding issues).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
aka "BOLT 3: Use revocation key hash rather than revocation key",
which builds on top of lightningnetwork/lightning-rfc#105 "BOLT 2,3,5:
Make htlc outputs of the commitment tx spendable with revocation key".
This affects callers, since they now need to hand us the revocation
pubkey, but commit_tx has that already anyway.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
All the daemons will use a common seed for point derivation, so drag
it out of lightningd/opening.
This also provide a nice struct wrapper to reduce argument count.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a bit tricky: for our signing code, we don't want scriptsigs,
but to calculate the txid, we need them. For most transactions in lightning,
they're pure segwit so it doesn't matter, but funding transactions can
have P2SH-wrapped P2WPKH inputs.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
built_utxos needs to calculate fees for figuring out how many utxos to
use, so fix that logic and rely on it.
We make build_utxos return a pointer array, so funding_tx can simply hand
that to permute_inputs.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Only minor changes, but I add some more spec text to
lightningd/test/run-commit_tx.c to be sure to catch if it changes
again.
One reference isn't upstream yet, so had to be commented out.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The signing helper was really just for testing, so remove it. But
turn the funding_tx() function into a useful one by making it take the
utxo array.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Raw crypto_state is what we send across the wire: the peer one is for
use in async crypto io routines (peer_read_message/peer_write_message).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This object is basically the embodyment of BOLT #2. Each HTLC already
knows its own state; this moves them between states and keeps them
consistent.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's currently written to produce "local" commit-txs, but of course we
need to produce remote ones too, for signing.
Thus instead of using "remote" and "local" we use "other" and "self",
and indicate with a single "side" flag which we're generating (because
that changes how HTLCs are interpreted).
This also adds to the tests: generate the remote view of the commit_tx
and make sure it matches!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We were using the remote per_commitment_point instead of the local
per_commitment_point to generate the remotekey for the local transaction.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We can't run them in parallel, but we can at least have 'make check'
run them all.
Developers should be running "make check-source && make check".
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
These use the same infrastructure as the daemon/test blackbox tests,
so they're not currently wired into make check; use make
"lightningd-blackbox-tests".
