This allows us to set more fine-grained feerate for onchain resolution.
We still give it the same feerate for all types, but this will change as
we move feerates to bcli.
Command format: close id [unilateraltimeout] [destination]
Close the channel with peer {id}, forcing a unilateral
close after {unilateraltimeout} seconds if non-zero, and
the to-local output will be sent to {destination}. If
{destination} isn't specified, the default is the address
of lightningd.
Also change the pylightning:
update the `close` API to support `destination` parameter
`shutdown_scriptpubkey[REMOTE]` is original remote_shutdown_scriptpubkey;
`shutdown_scriptpubkey[LOCAL]` is the script used for "to-local" output when `close`. Add the default is generated form `final_key_idx`;
Store `shutdown_scriptpubkey[LOCAL]` into wallet;
Currently the only source for amount_asset is the value getter on a tx output,
and we don't hand it too far around (mainly ignoring it if it isn't the
chain's main currency). Eventually we could bubble them up to the wallet, use
them to select outputs or actually support assets in the channels.
Since we don't hand them around too widely I thought it was ok for them to be
pass-by-value rather than having to allocate them and pass them around by
reference. They're just 41 bytes currently so the overhead should be ok.
Signed-off-by: Christian Decker <@cdecker>
We now have a pointer to chainparams, that fails valgrind if we do anything
chain-specific before setting it.
Suggested-by: Rusty Russell <@rustyrussell>
Turns out that if we have the init message contain both the chainparams as
well as a transaction that needs to be parsed we need to set the parser to
elements mode before we reach the transaction...
This is the other origin, besides `bitcoin_tx`, where we create `bitcoin_tx`
instances, so add the context as soon as possible. Sadly I can't weave the
chainparams into the deserialization code since that'd need to change all the
generated wire code as well.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
The spec says to close the channel if they send us an error, but we
need to be more lenient to preserve channels with other
implementations.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There's only one caller which used the flag.
As a side-effect, now we'll try reconnect even if the previous owner
was NULL (which mainly effects the case where we couldn't create the subd).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I was working on rewriting our (somewhat chaotic) tx watching code
for 0.7.2, when I found this bug: we don't always notice the funding
tx in corner cases where more than one block is detected at
once.
This is just the one commit needed to fix the problem: it has some
unnecessary changes, but I'd prefer not to diverge too far from my
cleanup-txwatch branch.
Fixes: #2352
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is important for things we automatically watched because it spends a
watch txo, but only onchaind knows the details about what the TX really is and
how it should be handled.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Encapsulating the peer state was a win for lightningd; not surprisingly,
it's even more of a win for the other daemons, especially as we want
to add a little gossip information.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
These are always handed to subdaemons as a set, so group them. This makes
it easier to add an fd (in the next patch).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
onchaind is in the correct position to tell us about them, so have it pass
them up as well.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
In order to avoid having to ask the HSM for public keys to
their_unilateral/to_us outputs we just store the `scriptPubkey` with the UTXO,
which can then be converted to the P2WPKH address.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We need to do it in various places, but we shouldn't do it lightly:
the primitives are there to help us get overflow handling correct.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As a side-effect of using amount_msat in gossipd/routing.c, we explicitly
handle overflows and don't need to pre-prune ridiculous-fee channels.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
For onchaind we need to remove globals from memleak consideration;
we also change the htlc pointer to an htlc copy, which simplifies
things as well.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If there are two HTLCs with the same preimage, lightningd would always
find the first one. By including the id in the `struct htlc_stub`
it's both faster (normal HTLC lookup) and allows lightningd to detect
that onchaind wants to fail both of them.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
That matches the other CSV names (HSM was the first, so it was written
before the pattern emerged).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We use feerate in several places, and each one really should react
differently when it's not available (such as when bitcoind is still
catching up):
1. For general fee-enforcement, we use the broadest possible limits.
2. For closingd, we use it as our opening negotiation point: just use half
the last tx feerate.
3. For onchaind, we can use the last tx feerate as a guide for our own txs;
it might be too high, but at least we know it was sufficient to be mined.
4. For withdraw and fund_channel, we can simply refuse.
Fixes: #1836
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We're about to use the txwatch facility for UTXOs, where there's no channel,
so allow that the be NULL, and hand the struct lightningd which callers
want anyway.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
connectd tells master about every disconnection, and master knows
whether it's important to reconnect. Just get the master to invoke a new
connect command if it considers the peer important!
The only twist is timeouts: we don't want to immediately reconnect if
we've failed to connect. To solve this, connectd passes a 'delaytime'
to the master when a connection fails, and the master passes it back
when it asks for a connection.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This means onchaind doesn't need the per-channel secret at all (aka. peer seed)
so we remove that from the onchaind_init message.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(This was sitting in my gossip-enchancement patch queue, but it simplifies
this set too, so I moved it here).
In 94711969f we added an explicit gossip_index so when gossipd gets
peers back from other daemons, it knows what gossip it has sent (since
gossipd can send gossip after the other daemon is already complete).
This solution is insufficient for the more general case where gossipd
wants to send other messages reliably, so replace it with the other
solution: have gossipd drain the "gossip fd" which the daemon returns.
This turns out to be quite simple, and is probably how I should have
done it originally :(
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This will allow us in the next commit to store the transactions that triggered
this event in the DB and thus allowing us to replay them later on.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We used to queue the preimages to be sent to onchaind only after receiving the
onchaind_init_reply. Once we start replaying we might end up in a situation in
which we queue the tx that onchaind should react to before providing it with the
preimages. This commit just moves the preimages being sent, making it atomic
with the init, and without changing the order.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
All of the callback functions were only using the tx to generate the txid again,
so we just pass that in directly and save passing the tx itself.
This is a simplification to move to the DB backed depth callbacks. It'd be
rather wasteful to read the rawtx and deserialize just to serialize right away
again to find the txid, when we already searched the DB for exactly that txid.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This is necessary since we have onchaind tell us about the
their_unilateral/to_us output, after it is already in a block.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This simplifies things, and means it's always in the database. Our
previous approach to creating it on the fly had holes when it was
created for onchaind, causing us to use another every time we
restarted.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The billboard is now far more useful to tell what's going on, and this
gets us closer to a state == owner mapping.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We always hand in "NULL" (which means use tal_len on the msg), except
for two places which do that manually for no good reason.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
