We used to create some p2sh-segwit addresses just to mix things up. This
streamlines back to just bech32.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
With the next change (which, as a side-effect, speeds up listpeers),
we seem to hit a race in this test. The bookkeeper doesn't get to
process the final payment before the node is shutdown.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There's no guarantee as to iteration order for accounts/channels, but
this test was relying on them.
Adding account attribution and comparing by account_ids fixes
Fixes: #5869
Reported-By: @rustyrussell
1. When we receive a commando command from a remote using the `filter`
field, use it.
2. Add a `filter` parameter to `commando` to send it: this is usually
more efficient than using filtering locally.
Of course, older remote nodes will ignore the filter, but that's
harmless.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Plugins: `commando` now supports `filter` as a parameter (for send and receive).
This was reported a while ago: now do it properly.
Fixes: #5637
Changelog-Fixed: Plugins: `commando` now responds to remote JSON calls with the correct JSON `id` field.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We change the libplugin API so commando can provide its own ID base.
This id chaining enables much nicer diagnostics!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We don't do this yet, so we add deprecated to those test (until next
patch!).
Changelog-Deprecated: plugins: `commando` JSON commands without an `id` (see doc/lightningd-rpc.7.md for how to construct a good id field).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The top of the file indicates the following errors:
#define NO_ERROR 0
#define ERROR_FROM_LIGHTNINGD 1
#define ERROR_TALKING_TO_LIGHTNINGD 2
#define ERROR_USAGE 3
But we didn't use the right one for opt_parse failure, and didn't use the
correct constants everywhere.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This avoids any confusion between primitive and string ids, and in
particular stops an issue with commando once it starts chaining ids,
that weird ids can be double-escaped and commando will not recognize
the response, leaving the client hanging. It's the client's fault for
using a weird id, but it's still rude (and triggered by our tests!).
It also makes substituting the id in passthrough simpler, FTW.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Issue #5363 documented an earlier bug in mkfunding. These tests validate that fix as well as checking that basic usage produces the proper response and exit status.
Changelog-None
This broke BTCPayServer, so revert. I originally (accidentally!)
implemented this such that it broadcast both DNS and IP entries, but
Michael reported earlier that they still don't propagage well, so
simply suppress them.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: #5795
Changelog-Changeed: Config: `announce-addr-dns` needs to be set to *true* to put DNS names into node announcements, otherwise they are suppressed.
Changelog-Deprecated: Config: `announce-addr-dns` (currently defaults to `false`). This will default to `true` once enough of the network has upgraded to understand DNS entries.
If we both support large channels, we can actually send giant HTLCs.
This, in turn, fixes pay (which relies on this field!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: Plugins: `pay` now knows it can use locally-connected wumbo channels for large payments.
Fixes: #5250Fixes: #5417
We have a primary key that is spanning the `in_channel_id` and the
`in_htcl_id`. The latter gets set to NULL when the HTLC and channel
gets deleted, so we coalesce with a random large number that is
unlikely to collide for the primary key.
This is a minimal fix: we wait until all plugins reply from init before
continuing. Really large or busy nodes can have other things monopolize
lightningd, then the timer goes off and we blame the plugin (which has
responded, we just haven't read it yet!).
The real answer is to have some timeouts only advance when we're idle,
or have them low-priority so we only activate them when we're idle (this
doesn't apply to all timers: some are probably important!). But
this is a minimal fix for -rc3.
Fixes: https://github.com/ElementsProject/lightning/issues/5736
Changelog-Fixed: plugins: on large/slow nodes we could blame plugins for failing to answer init in time, when we were just slow.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
On testnet I noticed if we can't reach bitcoind for some reason, we'll
keep RBFing our penalty tx ("it didn't go in, RBF harder!!"). Makes
no sense to grossly exceed the amount needed for next block, so simply
cap penalty at 2x "estimatesmartfee 2 CONSERVATIVE".
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We were missing the OP_PUSH for the pubkeys, and the spec mentions we
should be using 73 bytes to estimate the witness weight. Effectively
this adds 4 bytes which really just matters in case fees hit the
floor, and computing the weight becomes important.
Changelog-Fixed: onchaind: Witness weight estimations could be slightly lower than the VLS signer
This is how we put new invoice_requests into the db; this will be used
by a new "invoicerequest" command which replaces "offerout".
The API is now the same as the offers api.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We no longer use offers for "I want to send you money", but we'll use
invoice_requests directly. Create a new table for them, and
associated functions.
The "localofferid" for "pay" and "sendpay" is now "localinvreqid".
This is an experimental-only option, so document the change under
experimental only.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: JSON-RPC: `pay` and `sendpay` `localofferid` is now `localinvreqid`.
I know this is an unforgivably large diff, but the spec has changed so
much that most of this amounts to a rewrite.
Some points:
* We no longer have "offer_id" fields, we generate that locally, as all
offer fields are mirrored into invoice_request and then invoice.
* Because of that mirroring, field names all have explicit offer/invreq/invoice
prefixes.
* The `refund_for` fields have been removed from spec: will re-add locally later.
* quantity_min was removed, max == 0 now mean "must specify a quantity".
* I have put recurrence fields back in locally.
This brings us to 655df03d8729c0918bdacac99eb13fdb0ee93345 ("BOLT 12:
add explicit invoice_node_id.")
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The "path" is just a message to ourselves. This meets the minimal
requirement for bolt12 invoices: that there be a blinded path (at
least so we can use the path_id inside in place of "payment_secret").
We expose the method to make this path_id to a common routine: offers
will need this for generating more sophisticated paths.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `listfunds` now lists coinbase outputs as 'immature' until they're spendable
Changelog-Changed: JSON-RPC: UTXOs aren't spendable while immature
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: pyln: LightningRpc has new `reply_filter` context manager for reducing output of RPC commands.
We suppress schema reply checking when filter is set: we could just
remove all the `required` fields in the JSON schema.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
No tests currently use it, and if they do we'll want to do some
per-test objects. Otherwise, we are about it introduce a dependency
on common/json_filter.o, which is a can of worms.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. Remove the very concept of ONION_REPLY_SIZE, instead make it a
local variable in create_onionreply().
2. Use the proper fromwire_ primitives in unwrap_onionreply() so we
don't have to do explicit length checks.
3. Make fromwire_tal_arrn() return NULL if it fails to pull, instead of
a zero-length allocation.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: Protocol: we now correctly decrypt non-256-length onion errors (we always forwarded them fine, now we actually can parse them).
This is because JSON technically does not allow numeric keys in maps.
Changelog-Added: JSON-RPC: The `extratlvs` argument for `keysend` now allows quoting the type numbers in string
It's 2b7ad577d7a790b302bd1aa044b22c809c76e49d, which reverts the
point32 changes.
It also restores send_invoice in `invoice`, which we had removed
from spec and put into the recurrence patch.
I originally had implemented compatibility, but other changes
which followed this are far too widespread.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: offers: complete rework of spec from other teams (yay!) breaks previous compatibility (boo!)
