If we initialized the payment, the fees are the entire fee-chain
(final hop amount - starting hop amount)
If it's a payment we routed, the fees are the diff between the
inbound htlc and the outbound (net gain by this routing)
Added to database so data persists nicely.
If we're over the dust limit, we fail it immediatey *after* commiting
it, but we need a way to signal this throughout the lifecycle, so we add
it to htlc_in struct and persist it through to the database.
If it's supposed to be failed, we fail after the commit cycle is
completed.
We set the timeout on first HTLC, but didn't clear it if that HTLC failed.
It's saner to have a per-HTLC timeout (since that's what it is!) and
also our timer infra is specially coded to scale approximately infinitely so
trying to optimize this is vastly premature.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: Protocol: We would sometimes gratuitously disconnect 30 seconds after an HTLC failed.
This avoids overwriting the ones in git, and generally makes things neater.
We have convenience headers wire/peer_wire.h and wire/onion_wire.h to
avoid most #ifdefs: simply include those.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The current plan for coin movements involves tagging
origination/destination htlc's with a separate tag from 'routed' htlcs
(which pass through our node). In order to do this, we need a persistent flag on
incoming htlcs as to whether or not we are the final destination.
Note that it's channeld which calculates the shared secret, too. This
minimizes the work that lightningd has to do, at cost of passing this
through.
We also don't yet save the blinding field(s) to the database.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
At the moment, we store e.g. WIRE_TEMPORARY_CHANNEL_FAILURE, and then
lightningd has a large demux function which turns that into the correct
error message.
Such an enum demuxer is an anti-pattern.
Instead, store the message directly for output HTLCs; channeld now
sends us an error message rather than an error code.
For input HTLCs we will still need the failure code if the onion was
bad (since we need to prompt channeld to send a completely different
message than normal), though we can (and will!) eliminate its use in
non-BADONION failure cases.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Instead of making it ourselves, lightningd does it. Now we only have
two cases of failed htlcs: completely malformed (BADONION), and with
an already-wrapped onion reply to send.
This makes channeld's job much simpler.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This makes it clear we're dealing with a message which is a wrapped error
reply (needing unwrap_onionreply), not an already-wrapped one.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a transient field, so rework things so we don't leave it in
struct htlc_out. Instead, load htlc_in first and connect htlc_out to
them as we go.
This also changes one place where we use it instead of the am_origin
flag.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is in preparation for partial payments. For existing payments,
partid is 0 (to match the corresponding payment).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We'd like to display the receive and resolution times in the forwardings
table. In order to remember the receive time we need to store it in the DB
along with the other information.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
As a side-effect of using amount_msat in gossipd/routing.c, we explicitly
handle overflows and don't need to pre-prune ridiculous-fee channels.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We currently use 'all-zeroes' as 'unknown', but NULL is more natural
even if we have to send it as all-zeroes over the wire due to
expressiveness limitations in our generation code.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Noted by @cdecker, the term 'local' is grossly overused, and the hout
preimage is basically only used as a sanity check (though I've just put
a FIXME there for now).
Also eliminated spurious blank line which crept into wallet.c.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
memleak can't see into htables, as it overloads unused pointer bits.
And it can't see into intmap, since they use malloc (it only looks for tal
pointers).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Maintaining it was always fraught, since the command could go away
if the JSON RPC died. Most recently, it was broken again on shutdown
(see below).
In future we may allow pay commands to block on previous payments, so
it won't even be a 1:1 mapping. Generalize it: keep commands in a
simple list and do a lookup when a payment fails/succeeds.
Valgrind error file: valgrind-errors.5732
==5732== Invalid read of size 8
==5732== at 0x4149FD: remove_cmd_from_hout (pay.c:292)
==5732== by 0x468BAB: notify (tal.c:237)
==5732== by 0x469077: del_tree (tal.c:400)
==5732== by 0x4690C7: del_tree (tal.c:410)
==5732== by 0x46948A: tal_free (tal.c:509)
==5732== by 0x40F1EA: main (lightningd.c:362)
==5732== Address 0x69df148 is 1,512 bytes inside a block of size 1,544 free'd
==5732== at 0x4C2EDEB: free (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==5732== by 0x469150: del_tree (tal.c:421)
==5732== by 0x46948A: tal_free (tal.c:509)
==5732== by 0x4198F2: free_htlcs (peer_control.c:1281)
==5732== by 0x40EBA9: shutdown_subdaemons (lightningd.c:209)
==5732== by 0x40F1DE: main (lightningd.c:360)
==5732== Block was alloc'd at
==5732== at 0x4C2DB8F: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==5732== by 0x468C30: allocate (tal.c:250)
==5732== by 0x4691F7: tal_alloc_ (tal.c:448)
==5732== by 0x40A279: new_htlc_out (htlc_end.c:143)
==5732== by 0x41FD64: send_htlc_out (peer_htlcs.c:397)
==5732== by 0x41511C: send_payment (pay.c:388)
==5732== by 0x41589E: json_sendpay (pay.c:513)
==5732== by 0x40D9B1: parse_request (jsonrpc.c:600)
==5732== by 0x40DCAC: read_json (jsonrpc.c:667)
==5732== by 0x45C706: next_plan (io.c:59)
==5732== by 0x45D1DD: do_plan (io.c:387)
==5732== by 0x45D21B: io_ready (io.c:397)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
For performance, we delay entering the 'wallet_payment' into the db
until we actually commit to the HTLC (when we have to touch the DB
anyway).
This opens a race where we can try to pay twice, and since it's not in
the database yet, we don't notice the duplicate.
So remove the temporary payment field from htlc_out, which was always
an uncomfortable hack, and make the wallet code abstract over the
deferred entry a little by maintaining a 'unstored_payments' list
and incorporating that in results.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We set hout->key.id when channeld tells us what it is, but if channeld
dies before that we free the hout, and our destructor logs it:
Valgrind error file: valgrind-errors.20312
==20312== Use of uninitialised value of size 8
==20312== at 0x53ABC9B: _itoa_word (_itoa.c:179)
==20312== by 0x53B041F: vfprintf (vfprintf.c:1642)
==20312== by 0x53B17D5: buffered_vfprintf (vfprintf.c:2330)
==20312== by 0x53AEAA5: vfprintf (vfprintf.c:1301)
==20312== by 0x53B7D63: fprintf (fprintf.c:32)
==20312== by 0x128BAC: hout_subd_died (peer_htlcs.c:316)
==20312== by 0x16D8E0: notify (tal.c:240)
==20312== by 0x16DD95: del_tree (tal.c:400)
==20312== by 0x16DDE7: del_tree (tal.c:410)
==20312== by 0x16DDE7: del_tree (tal.c:410)
==20312== by 0x16E1B4: tal_free (tal.c:509)
==20312== by 0x162B5C: io_close (io.c:443)
==20312== by 0x12D563: sd_msg_read (subd.c:508)
==20312== by 0x161EA5: next_plan (io.c:59)
==20312== by 0x1629A2: do_plan (io.c:387)
==20312== by 0x1629E0: io_ready (io.c:397)
==20312== by 0x164319: io_loop (poll.c:305)
==20312== by 0x118E21: main (lightningd.c:334)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a primitive mark-and-sweep-style garbage detector. The core is
in common/ for later use by subdaemons, but for now it's just lightningd.
We initialize it before most other allocations.
We walk the tal tree to get all the pointers, then search the `ld`
object for those pointers, recursing down. Some specific helpers are
required for hashtables (which stash bits in the unused pointer bits,
so won't be found).
There's `notleak()` for annotating things that aren't leaks: things
like globals and timers, and other semi-transients.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The master now hands channeld either an error code, and channeld
generates the error message, or an error message relayed from another
node to pass through.
This doesn't fill in the channel_update yet: we need to wire up gossipd
to give us that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This addresses a performance regression introduced by
6ceb375650. We were storing it in an
otherwise empty DB transaction, which means that DB transaction was no
longer a no-op. Now we defer storing until we need to store the
corresponding HTLC anyway, so we can just piggyback on top of that
transaction.
This is also more consistent since we'd be forgetting the payment
anyway if we restart between adding the HTLC and committing to it.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
While loading HTLCs from the database we might not yet have all the
incoming HTLCs loaded when loading a dependent htlc_out. So we defer
the wiring of the HTLCs until we are sure we have them loaded.
This is also the first step towards keeping that association only in
the database, since otherwise we cannot selectively load channels from
DB.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Also, we split the more sophisticated json_add helpers to avoid pulling in
everything into lightning-cli, and unify the routines to print struct
short_channel_id (it's ':', not '/' too).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In the case where we can't decrypt the onion, we can't fail it in the
normal way (which is encrypted using the onion shared secret), we need
to respond with a update_fail_malformed_htlc message.
Moreover, we need to remember this for persistence. This means that
we really have three conclusions for an HTLC: fulfilled, failed,
malformed. Fix up the logic everywhere which assumed failed or
fulfilled.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
They share some fields, but they're basically different, and it's clearest
to treat them differently in most places.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
When adding their HTLCs, it needs all the information. When failing,
it needs the id as key and the failure reason. When fulfilling, it
needs the id and payment preimage.
It also needs to know when we have received an revoke_and_ack or a
commitment_signed, to place in the database.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We still get the shared secret, since that requires a round trip to the HSM
(why waste the master daemon's time?) but it does the processing, which
simplifies the message passing and things like realm handling which
have nothing to do with this particular channeld.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Some paths were still sending unencrypted failure messages; unify them
all. We need to keep the fail_msg around for resubmission if the
channeld dies; similarly, we need to keep the htlc_end structure
itself after failure, in case the failed HTLC is committed: we can
move it to a minimal archive once it's flushed from both sides,
however.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We alternated between using a sha256 and using a privkey, but there are
numerous places where we have a random 32 bytes which are neither.
This fixes many of them (plus, struct privkey is now defined in terms of
struct secret).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
