They callback must take ownership of the payload (almost all do, but
now it's explicit).
And since the payload and cb_arg arguments to plugin_hook_call_() are
always identical, make them a single parameter.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Note that it's channeld which calculates the shared secret, too. This
minimizes the work that lightningd has to do, at cost of passing this
through.
We also don't yet save the blinding field(s) to the database.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This requires us to call ecdh() in the corner case where the blinding seed
is in the TLV itself (which is the case for the start of a blinded route).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Use `LC_ALL=C sort` instead of `sort` so that mocks get sorted in
the same way on all developers' environments.
Re-record the result of `make update-mocks`.
Changelog-None
This is useful in general, but in particular it allows fundchannel to avoid YA
query to figure out if it can wumbo.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON: `connect` returns `features` of the connected peer on success.
We kept track of an URGENT, a NORMAL, and a SLOW feerate. They were used
for opening (NORMAL), mutual (NORMAL), UNILATERAL (URGENT) transactions
as well as minimum and maximum estimations, and onchain resolution.
We now keep track of more fine-grained feerates:
- `opening` used for funding and also misc transactions
- `mutual_close` used for the mutual close transaction
- `unilateral_close` used for unilateral close (commitment transactions)
- `delayed_to_us` used for resolving our output from our unilateral close
- `htlc_resolution` used for resolving onchain HTLCs
- `penalty` used for resolving revoked transactions
We don't modify our requests to our Bitcoin backend, as the next commit
will batch them !
Changelog-deprecated: The "urgent", "slow", and "normal" field of the `feerates` command are now deprecated.
Changelog-added: The fields "opening", "mutual_close", "unilateral_close", "delayed_to_us", "htlc_resolution" and "penalty" have been added to the `feerates` command.
Postgres does not guarantee that the insertion order is the returned order,
which leads us to skip outputs that have already been stolen onto the selected
utxos set, but not added to it because it isn't confirmed. This may also
happen with sqlite3 though it's a lot rarer in that case.
For messages, we use the onion but payload lengths 0 and 1 aren't special.
Create a flag to disable that logic.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Even without optimization, it's faster to walk all the channels than
ping another daemon and wait for the response.
Changelog-Changed: Forwarding messages is now much faster (less inter-daemon traffic)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The idea is that gossipd can give us the cupdate we need for an error, and
we wire things up so that we ask for it (async) just before we send the
error to the subdaemon.
I tried many other things, but they were all too high-risk.
1. We need to ask gossipd every time, since it produces these lazily
(in particular, it doesn't actually generate an offline update unless
the channel is used).
2. We can't do async calls in random places, since we'll end up with
an HTLC in limbo. What if another path tries to fail it at the same time?
3. This allows us to use a temporary_node_failure error, and upgrade it
when gossipd replies. This doesn't change any existing assumptions.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a common thing to do, so create a macro.
Unfortunately, it still needs the type arg, because the paramter may
be const, and the return cannot be, and C doesn't have a general
"(-const)" cast.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This completes the conversion; any in-flight HTLC failures get turned into temporary_node_failures.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
At the moment, we store e.g. WIRE_TEMPORARY_CHANNEL_FAILURE, and then
lightningd has a large demux function which turns that into the correct
error message.
Such an enum demuxer is an anti-pattern.
Instead, store the message directly for output HTLCs; channeld now
sends us an error message rather than an error code.
For input HTLCs we will still need the failure code if the onion was
bad (since we need to prompt channeld to send a completely different
message than normal), though we can (and will!) eliminate its use in
non-BADONION failure cases.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We're going to change our internal structure next, so this is preparation.
We populate existing errors with temporary node failures, for simplicity.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Instead of making it ourselves, lightningd does it. Now we only have
two cases of failed htlcs: completely malformed (BADONION), and with
an already-wrapped onion reply to send.
This makes channeld's job much simpler.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I hadn't realized that lightningd asks gossipd every time we forward
a payment. But I'm going to abuse it here to get the latest channel_update,
otherwise (as lightningd takes over error message generation) lightningd
needs to do an async request at various painful points.
So have gossipd tell us the lastest update (stripped so compatible with
the strange in-onion-error format).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Turn it into temporary node failure: this only happens if we restart
with a failed htlc in, but it's clearer and more robust to handle it
generically.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Added in d901304120, this column is null in old dbs like mine:
2020-02-15T00:08:41.444Z **BROKEN** database: Accessing a null column 12 in query SELECT id, channel_htlc_id, msatoshi, cltv_expiry, hstate, payment_hash, payment_key, routing_onion, failuremsg, malformed_onion, origin_htlc, shared_secret, received_time FROM channel_htlcs WHERE direction= ? AND channel_id= ? AND hstate != ?
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If the peer is not connected, or other error which means we don't
actually create an outgoing HTLC, we don't record the
short_channel_id. This is unhelpful!
Pass the scid down to the wallet code, and explicitly hand the
scid and amount down to the notification code rather than handing it
the htlc_out (which it doesn't need).
Changelog-Changed: JSON API: `listforwards` now shows `out_channel` even if we couldn't forward.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This sets the nLockTime to the tip (and accordingly each input's nSequence to
0xfffffffe) for withdrawal transactions.
Even if the anti fee-sniping argument might not be valid until some time yet,
this makes our regular wallet transactions far less distinguishable from
bitcoind's ones since it now defaults to using native Segwit transactions
(like us). Moreover other wallets are likely to implement this (if they
haven't already).
Changelog-Added: wallet: withdrawal transactions now sets nlocktime to the current tip.
Before this patch we used `int` for error codes. The problem with
`int` is that we try to pass it to/from wire and the size of `int` is
not defined by the standard. So a sender with 4-byte `int` would write
4 bytes to the wire and a receiver with 2-byte `int` (for example) would
read just 2 bytes from the wire.
To resolve this:
* Introduce an error code type with a known size:
`typedef s32 errcode_t`.
* Change all error code macros to constants of type `errcode_t`.
Constants also play better with gdb - it would visualize the name of
the constant instead of the numeric value.
* Change all functions that take error codes to take the new type
`errcode_t` instead of `int`.
* Introduce towire / fromwire functions to send / receive the newly added
type `errcode_t` and use it instead of `towire_int()`.
In addition:
* Remove the now unneeded `towire_int()`.
* Replace a hardcoded error code `-2` with a new constant
`INVOICE_EXPIRED_DURING_WAIT` (903).
Changelog-Changed: The waitinvoice command would now return error code 903 to designate that the invoice expired during wait, instead of the previous -2
This command injects a custom message into the encrypted transport stream to
the peer, allowing users to build custom protocols on top of c-lightning
without requiring any changes to c-lightning itself.
Generally I prefer structures over u8, since the size is enforced at
runtime; and in several places we were doing conversions as the code
using Sphinx does treat struct secret as type of the secret.
Note that passing an array is the same as passing the address, so
changing from 'u8 secret[32]' to 'struct secret secret' means various
'secret' parameters change to '&secret'. Technically, '&secret' also
would have worked before, since '&' is a noop on array, but that's
always seemed a bit weird.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This makes it clear we're dealing with a message which is a wrapped error
reply (needing unwrap_onionreply), not an already-wrapped one.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I really want a type which means "I am a wrapped onion reply" as separate
from "I am a normal wire msg". Currently both user u8 *, and I got very
confused trying to figure out where each one was an unwrapped error msg,
or where it still needed (un)wrapping.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
`wallet_payment_store` would free the `wallet_payment` instance which would
then cause us to reload it from the DB. Instead of doing the store->free->load
dance we now tell `wallet_payment_store` whether it should take ownership and
leave it alone if not.
Passing the payment around instead of referencing it through payment_hash and
partid is a nice side-effect.
The optimistic lock prevents multiple instances of c-lightning making
concurrent modifications to the database. That would be unsafe as it messes up
the state in the DB. The optimistic lock is implemented by checking whether a
gated update on the previous value of the `data_version` actually results in
an update. If that's not the case the DB has been changed under our feet.
The lock provides linearizability of DB modifications: if a database is
changed under the feet of a running process that process will `abort()`, which
from a global point of view is as if it had crashed right after the last
successful commit. Any process that also changed the DB must've started
between the last successful commit and the unsuccessful one since otherwise
its counters would not have matched (which would also have aborted that
transaction). So this reduces all the possible timelines to an equivalent
where the first process died, and the second process recovered from the DB.
This is not that interesting for `sqlite3` where we are also protected via the
PID file, but when running on multiple hosts against the same DB, e.g., with
`postgres`, this protection becomes important.
Changelog-Added: DB: Optimistic logging prevents instances from running concurrently against the same database, providing linear consistency to changes.
This increments the `data_version` upon committing dirty transactions, reads
the last data_version upon startup, and tracks the number in memory in
parallel to the DB (see next commit for rationale).
Changelog-Changed: JSON-RPC: Added a `data_version` field to the `db_write` hook which returns a numeric transaction counter.
This is the final step: we pass the complete fee_states to and from
channeld.
Changelog-Fixed: "Bad commitment signature" closing channels when we sent back-to-back update_fee messages across multiple reconnects.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The upgrade here is a bit tricky: we map the two values into the
feerate_state. This is trivial if they're both the same, but if
they're different we don't know exactly what state they're in (this
being the source of the bug!).
So, we assume that the have received the update and not acked it,
as that would be the normal case.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The invoice_try_pay code now takes a set, rather than a single htlc, but
it's basically the same thing.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a transient field, so rework things so we don't leave it in
struct htlc_out. Instead, load htlc_in first and connect htlc_out to
them as we go.
This also changes one place where we use it instead of the am_origin
flag.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is in preparation for partial payments. For existing payments,
partid is 0 (to match the corresponding payment).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is in preparation for partial payments. For existing payments,
partid is 0 (arbitrarity) and total_msat is msatoshi.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Now "raw_payload" is always the complete string (including realm or length
bytes at the front).
This has several effects:
1. We can receive an decrypt an onion which is grossly malformed.
2. We can still hand this to the htlc_accepted hook.
3. We then fail it unless the htlc_accepted accepts it manually.
4. The createonion API now takes the raw payload, and does not know
anything about "style".
The only caveat is that the sphinx code needs to know the payload
length: we have a call for that, which simply tells it to copy the
entire onion (and treat us as the final node) if it's invalid.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If we can't decode the onion, because the onion got corrupted or we used
`sendonion` without specifying the `shared_secrets` used, the best we can do
is tell the caller instead.
This means that c-lightning can now internally decrypt an eventual error
message, and not force the caller to implement the decryption. The main
difficulty was that we now have a new state (channels and nodes not specified,
while shared_secrets are specified) which needed to be handled.
We are breaking with a couple of assumptions, namely that we have the
`path_secrets` to decode the error onion. If this happens we just want it to
error out.
We don't set the secret to compulsory (yet!) but put code in for the
future. Meanwhile, if there is a secret, check it is correct.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In a future version, we will use features to insist that payers
provide the secret. In transition, we may have old invoices which
didn't insist on that, so we need to know this on a per-invoice basis.
Not sure if I got the right syntax for adding an empty blob though!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We have consolidated the two functions into a single `route_step_decode`
function, and made it static since we call it in the `process_onionpacket`
function. We remove the two exposed functions since they're no longer useful.
Since the parser itself just parses and doesn't include validation anymore we
need to put that functionality somewhere. The validation consists of enforcing
that the types are in monotonically increasing order without duplicates and
that for the even types we know how to handle it.
This allows finegrained logging control of particular subdaemons or
subsystems.
To do this, we defer setting the logging levels for each log object
until after early argument parsing (since e.g. "bitcoind" log object
is created early).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-changed: Options: log-level can now specify different levels for different subsystems.
1. Printed form is always "[<nodeid>-]<prefix>: <string>"
2. "jcon fd %i" becomes "jsonrpc #%i".
3. "jsonrpc" log is only used once, and is removed.
4. "database" log prefix is use for db accesses.
5. "lightningd(%i)" becomes simply "lightningd" without the pid.
6. The "lightningd_" prefix is stripped from subd log prefixes, and pid removed.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-changed: Logging: formatting made uniform: [NODEID-]SUBSYSTEM: MESSAGE
Changelog-removed: `lightning_` prefixes removed from subdaemon names, including in listpeers `owner` field.
We had a separate logbook for each peer, and copy log entries above
the printable log level into the master logbook. This didn't always
work well, since we didn't dump it on crash for example.
Keep a single global logbook instead, and remove this infrastructure.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
A log can have a default node_id, which can be overridden on a per-entry
basis. This changes the format of logging, so some tests need rework.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The case where this is needed is when the wallet had a forwarded payment
somewhere between commits 66a47d2 (which started tracking forwardings) and
d901304 (which added the `received_time` column). This just emulates the
behavior of sqlite3 for postgres as well.
Signed-off-by: Christian Decker <@cdecker>
Checking on whether we access a null field is ok, but should we crash right
away? Probably not. This reduces the access to a warning on sqlite3 and let's
it continue. We can look for occurences and fix them as they come up and then
re-arm the asserts once we addressed all cases.
We were implicitly relying on sqlite3 behavior that returns the zero-value for
nulled fields when accessing them. This adds the same behavior explicitly to
the DB abstraction in order to reduce `db_column_is_null` checks in the logic,
but still make it evident what is happening here.
Fixes https://github.com/fiatjaf/mcldsp/issues/1
Signed-off-by: Christian Decker <@cdecker>
I had a report of a 0.7.2 user whose node hadn't appeared on 1ml. Their
node_announcement wasn't visible to my node, either.
I suspect this is a consequence of recent version reducing the amount of
gossip they send, as well as large nodes increasingly turning off gossip
altogether from some peers (as we do). We should ignore timestamp filters
for our own channels: the easiest way to do this is to push them out
directly from gossipd (other messages are sent via the store).
We change channeld to wrap the local channel_announcements: previously
we just handed it to gossipd as for any other gossip message we received
from our peer. Now gossipd knows to push it out, as it's local.
This interferes with the logic in tests/test_misc.py::test_htlc_send_timeout
which expects the node_announcement message last, so we generalize
that too.
[ Thanks to @trueptolmy for bugfix! ]
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is mainly an internal-only change, especially since we don't
offer any globalfeatures.
However, LND (as of next release) will offer global features, and also
expect option_static_remotekey to be a *global* feature. So we send
our (merged) feature bitset as both global and local in init, and fold
those bitsets together when we get an init msg.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This patch adds a channel_id parameter to allow for specifying
channels that are lacking a short_channel_id.
Useful in the case where a peer has 1) multiple channels (ONCHAIN etc)
and 2) a channel where the funding transaction hasn't been
broadcast/mined.
Command format: close id [unilateraltimeout] [destination]
Close the channel with peer {id}, forcing a unilateral
close after {unilateraltimeout} seconds if non-zero, and
the to-local output will be sent to {destination}. If
{destination} isn't specified, the default is the address
of lightningd.
Also change the pylightning:
update the `close` API to support `destination` parameter
`shutdown_scriptpubkey[REMOTE]` is original remote_shutdown_scriptpubkey;
`shutdown_scriptpubkey[LOCAL]` is the script used for "to-local" output when `close`. Add the default is generated form `final_key_idx`;
Store `shutdown_scriptpubkey[LOCAL]` into wallet;
Our policy is generally to omit fields which aren't sensible.
Also, @niftynei points out the spacing in for loops.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This triple join should be efficient to read, and to process. We have a
one-to-many (tx-to-annotations), followed by a
one-to-one (annotation-to-channel) join, so we are limited to annotations x
transactions results.
We have split the iteration over the txs and the output in different
functions, so pushing the annotation down, while keeping the transaction
addition atop. This showcases the need to not have the txid reference the
transactions.id in the DB: we annotate in a function that doesn't have the tx
index context, but only add the TX after we have finished extracting.
Currently the only source for amount_asset is the value getter on a tx output,
and we don't hand it too far around (mainly ignoring it if it isn't the
chain's main currency). Eventually we could bubble them up to the wallet, use
them to select outputs or actually support assets in the channels.
Since we don't hand them around too widely I thought it was ok for them to be
pass-by-value rather than having to allocate them and pass them around by
reference. They're just 41 bytes currently so the overhead should be ok.
Signed-off-by: Christian Decker <@cdecker>
In elements we add an explicit fee output, if we don't consider it when
selecting coins, we end up underpaying the fees.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Skipping coinbase transactions and ensuring that the transaction is serialized
correctly when sending it onwards.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
With enable-autotor-v2 defined in cmdline the default behavior to create
v3 onions with the tor service call, is set to v2 onions.
Signed-off-by: Saibato <saibato.naga@pm.me>
The DB field type has to match the size of the accessor-type, and we had to
split the `REPLACE INTO` and `INSERT INTO OR IGNORE` queries into two
queries (update and insert if not updated) since there is no portable UPSERT
operation, but impact should be minimal.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
sqlite3 was forgiving, postgres isn't, so let's make sure we use the strictest
field type possible, relaxing when rewriting.
The commit consists just of the following mapping
- INTEGER -> BIGSERIAL if it is the primary key
- INTEGER -> BIGINT if it is an amount or a reference to a primary key
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This was already done in `db_step` but `db_count_changes` and
`db_last_insert_id` also rely on the statement being executed. Furthermore we
now check that the statement was executed before freeing it, so it can't
happen that we dispose of a statement we meant to execute but forgot.
The combination of these could be used to replace the pending_statement
tracking based on lists, since we now make sure to execute all statements and
we use the memleak checker to make sure we don't keep a statement in memory.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
sqlite3 will just report 0 for anything that it thinks should be numeric, or
is accessed using a numeric accessor. Postgres does not, so we need to check
for is_null before trying to read it.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
sqlite3 doesn't really do any validation whatsoever, and there is no
difference between 64bit and 32bit numbers. Posgtres on the other hand gets
very upset if the size doesn't match.
This commit swaps out handwavy types with the ones that should be there :-)
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This was weird right from the start, so we just split the table into integers
and blobs, so each column has a well-defined format. It is also required for
postgres not to cry about explicit casts in the `paramTypes` array.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
The first ever query to check if the version DB exists may fail. We allow
this, but we need to restart the DB transaction since postgres fails the
current transaction and rolls back any changes.
This just commits (and fails) and starts a new transaction so the rest of the
migration can continue.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Needed to change a couple of migrations. The changes are mostly innocuous:
- changing BLOB to TEXT for short_channel_ids which is the correct type
anyway, and sqlite3 treats them the same anyway.
- Use `int` for version since the byte representation is checked by postgres.
- Change anything that is INT, but will be bound to u64 to BIGINT (again
postgres checks these more carefully than sqlite3).
Two migrations were replaced with dummy values, since they are buried deep
enough, and I found no portable way of expressing `strftime()` and `INSERT OR
IGNORE`.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Using a generated identifier with filename and line proved to be brittle since
compilers assign the __LINE__ macro differently on multi-line macro
invocations.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This is dangerous but needed since postgres is not as forgiving about
unsatisfied foreign key constraints even while in a DB transaction.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We used to do some of the setup work in db.c, which is now free of any
sqlite3-specific code. In addition we also switch over to fully qualified DSNs
to specify the location of the wallet.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This avoids having to correlate with listpeers for the most pertinent
information.
This API predates plugins, otherwise we'd have listutxos and listpeers
and this would simply combine them appropriately. Still, it exists so
there's little reason not to make it more friendly.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Allow a user to select the utxo set that will be added to a
transaction, via the `utxos` parameter. Optional.
Format for utxos should be of the form ["txid:vout","..."]
Rather than reaching into data structures, let them register their own
callbacks. This avoids us having to expose "memleak_remove_xxx"
functions, and call them manually.
Under the hood, this is done by having a specially-named tal child of
the thing we want to assist, containing the callback.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We're about to remove them.
Includes fix to sqlite3_bind_short_channel_id to not assume `id` is a
tal object.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Now that all the users are migrated to the abstraction layer we can remove the
legacy implementation.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We are about to delete all the `sqlite3`-specific code from `db.c` and this is
one of the last uses of the old interface.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
It's better to let the driver decide when and how to expand. It can then
report the expanded statement back to the dispatch through the
`db_changes_add` function.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We now have a much stronger consistency check from the combination of
transaction wrapping, tal memory leak detection. Tramsaction wrapping ensures
that each statement is executed before the transaction is committed. The
commit is also driven by the `io_loop`, which means that it is no longer
possible for us to have statements outside of transactions and transactions
are guaranteed to commit at the round's end.
By adding the tal-awareness we can also get a much better indication as to
whether we have un-freed statements flying around, which we can test at the
end of the round as well.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This is likely the last part we need to completely encapsulate the part of the
sqlite3 API that we were using. Like the `db_count_changes` call I decided to
pass in the `struct db_stmt` since really they refer to the statement that was
executed and not the db.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
These are based on top of the basic column access functions, and act as a
small type-safe wrapper, that also does a bit of validation.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This has a slight side-effect of removing the actual begin and commit
statements from the `db_write` hooks, but they are mostly redundant anyway (no
harm in grouping pre-init statements into one transaction, and we know that
each post-init call is supposed to be wrapped anyway).
Signed-off-by: Christian Decker <decker.christian@gmail.com>
These are used to do one-time initializations and wait for pending statements
before closing.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
I was hoping to get rid of these by using "ON CONFLICT" upserts, however
sqlite3 only started supporting them in version 3.24.0 which is newer than
some of our deployment targets.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This is the first step towards being able to extract information from query
rows. Only the most basic types are exposed, the others will be built on top
of these primitives.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
For some of the query methods in the next step we need to have an idea of
whether the stmt was executed (db_step function) so let's track that
explicitly.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
These do not require the ability to iterate over the result, hence they can be
migrated already.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
These functions implement the lookup of the query, and the dispatch to the
DB-specific functions that do the actual heavy lifting.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This gets rid of the two parallel execution paths of read-only and write
queries, by explicitly stating with each query whether it is a read-only
query, we only need to remember the ones marked as write queries.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
All drivers will have to reach into it, so put it in a place that is reachable
from the drivers, along with all other definitions.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This is the counterpart of the annotations we did in the last few commits. It
extracts queries, passes them through a driver-specific query rewriter and
dumps them into a driver-specific query-list, along with some metadata to
facilitate processing later on. The generated query list is then registered as
a `db_config` and will be loaded by the driver upon instantiation.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We will soon generalize the DB, so directly reaching into the `struct db`
instance to talk to the sqlite3 connection is bad anyway. This increases
flexibility and allows us to tailor the actual implementation to the
underlying DB.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
These two simple macros have a twofold use:
1) They serve as annotations for the query extraction tool to find them when
extracting queries from the C source code.
2) They replace the actual queries with names that can be used to lookup the
queries in a table again, once they have been rewritten into the target SQL dialect.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
`db_select_prepare` was prepending the "SELECT" part in an attempt to limit
its use to read-only statements. This is leads to the queries in the code not
actually being well-formed, which we'll need in a later commit, and was also
resulting in extra allocations. This switches the behavior to just enforce a
"SELECT" prefix being present which allows us to have well-formed queries in
the code again and avoids the extra allocation.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We need to have full DB queries that can be extracted at compile time later in
order to be able to rewrite them in other SQL dialects. In addition we had a
bit of unnecessary code-duplication in db_select and db_select_prepare. Now
the former uses the latter internally.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
These will interfere with our query extraction process later on, and they were
really separating definition from use anyway, so let's expand these field lists.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We want to still allow incoming connections, and reestablishment of
channels, but if one tries to give us an HTLC, stall until we're
synced.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
`close` takes two optional arguments: `force` and `timeout`.
`timeout` doesn't timeout the close (there's no way to do that), just
the JSON call. `force` (default `false`) if set, means we unilaterally
close at the timeout, instead of just failing.
Timing out JSON calls is generally deprecated: that's the job of the
client. And the semantics of this are confusing, even to me! A
better API is a timeout which, if non-zero, is the time at which we
give up and unilaterally close.
The transition code is awkward, but we'll manage for the three
releases until we can remove it.
The new defaults are to unilaterally close after 48 hours.
Fixes: #2791
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Dumb programs which have a --daemon option call fork() early. This is
terrible UX since startup errors get lost: the program exits with
"success" immediately then you discover via the logs that it didn't
start at all.
However, forking late introduced a heap of problems with changing
pids. Instead, fork early but keep stderr and the parent around: if
we fail early on, the parent fails with us. We release our parent
with an explicit action just before the main loop.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The withdraw_tx function shouldn't use it, but GCC is right it's uninitialized:
wallet/walletrpc.c: In function ‘json_prepare_tx’:
wallet/walletrpc.c:202:15: error: ‘changekey’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is the other origin, besides `bitcoin_tx`, where we create `bitcoin_tx`
instances, so add the context as soon as possible. Sadly I can't weave the
chainparams into the deserialization code since that'd need to change all the
generated wire code as well.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
The way we build transactions, serialize them, and compute fees depends on the
chain we are working on, so let's add some context to the transactions.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Since we now have a couple of long-lived dependents it is time we stop
removing channels from the table once they are fully closed, and instead just
mark them as closed. This allows us to keep forwards and transactions foreign
keys intact, and it may help us debug things after the fact.
Fixes#2028
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Instead of deleting the channels we will simple mark them as `CLOSED` from now
on. This is needed for some of the other tables not to end up with dangling
references that would otherwise survive the channel lifetime, e.g., forwards
and transactions.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Direct leak of 32 byte(s) in 1 object(s) allocated from:
#0 0x7f7678ee863e in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10c63e)
#1 0x55f8c7b0fce5 in htable_default_alloc ccan/ccan/htable/htable.c:19
#2 0x55f8c7b1064f in double_table ccan/ccan/htable/htable.c:226
#3 0x55f8c7b10b19 in htable_add_ ccan/ccan/htable/htable.c:331
#4 0x55f8c7afac63 in scriptpubkeyset_add wallet/txfilter.c:30
#5 0x55f8c7afafce in txfilter_add_scriptpubkey wallet/txfilter.c:77
#6 0x55f8c7afb05f in txfilter_add_derkey wallet/txfilter.c:91
#7 0x55f8c7aa4d67 in init_txfilter lightningd/lightningd.c:482
#8 0x55f8c7aa52d8 in main lightningd/lightningd.c:721
#9 0x7f767889ab6a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x26b6a)
Direct leak of 16 byte(s) in 1 object(s) allocated from:
#0 0x7f05f389563e in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10c63e)
#1 0x55cac1e6bc99 in htable_default_alloc ccan/ccan/htable/htable.c:19
#2 0x55cac1e6c603 in double_table ccan/ccan/htable/htable.c:226
#3 0x55cac1e6cacd in htable_add_ ccan/ccan/htable/htable.c:331
#4 0x55cac1e56e48 in outpointset_add wallet/txfilter.c:61
#5 0x55cac1e57162 in outpointfilter_add wallet/txfilter.c:116
#6 0x55cac1e5ea3a in wallet_utxoset_add wallet/wallet.c:2365
#7 0x55cac1deddc2 in topo_add_utxos lightningd/chaintopology.c:603
#8 0x55cac1dedeac in add_tip lightningd/chaintopology.c:620
#9 0x55cac1dee2de in have_new_block lightningd/chaintopology.c:694
#10 0x55cac1deaab0 in process_rawblock lightningd/bitcoind.c:466
#11 0x55cac1de9fb4 in bcli_finished lightningd/bitcoind.c:214
#12 0x55cac1e6f5be in destroy_conn ccan/ccan/io/poll.c:244
#13 0x55cac1e6f5de in destroy_conn_close_fd ccan/ccan/io/poll.c:250
#14 0x55cac1e7baf5 in notify ccan/ccan/tal/tal.c:235
#15 0x55cac1e7bfe4 in del_tree ccan/ccan/tal/tal.c:397
#16 0x55cac1e7c370 in tal_free ccan/ccan/tal/tal.c:481
#17 0x55cac1e6dddd in io_close ccan/ccan/io/io.c:450
#18 0x55cac1e6fcf9 in io_loop ccan/ccan/io/poll.c:449
#19 0x55cac1dfac66 in io_loop_with_timers lightningd/io_loop_with_timers.c:24
#20 0x55cac1e0156b in main lightningd/lightningd.c:822
#21 0x7f05f3247b6a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x26b6a)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I was working on rewriting our (somewhat chaotic) tx watching code
for 0.7.2, when I found this bug: we don't always notice the funding
tx in corner cases where more than one block is detected at
once.
This is just the one commit needed to fix the problem: it has some
unnecessary changes, but I'd prefer not to diverge too far from my
cleanup-txwatch branch.
Fixes: #2352
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Due to API instability we are disabling the RPC method for this release, but
will re-enable it after the release again.
Signed-off-by: Christian Decker <@cdecker>
We're going to need this for P2WSH scripts. pull it out into
a common file plus adopt the sanity checks so that it will allow for
either P2WSH or P2WPKH (previously only encoded P2WPKH scripts)
Move it closer to ccan/json_out, in preparation for using that as a
replacement.
In particular:
1. Add a 'quote' field in json_add_member.
2. json_add_member now always escapes if 'quote' is true.
3. json_member_direct is exposed to allow avoiding of escaping.
4. json_add_hex can use this, so no longer needs to be in json_stream.c.
5. We don't make JSON manually, but always use helpers.
6. We now flush the stream (wake reader) only when we close it, or mark
command as pending.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
"result" should always be an object (so that we can add new fields),
so make that implicit in json_stream_success.
This makes our primitives well-formed: we previously used NULL as our
fieldname when calling the first json_object_start, which is a hack
since we're actually in an object and the fieldname is 'result' (which
was already written by json_object_start).
There were only two cases which didn't do this:
1. dev-memdump returned an array. No API guarantees on this.
2. shutdown returned a string.
I temporarily made shutdown return an empty object, which shouldn't
break anything, but I want to fix that later anyway.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
These are generalized from our internal implementations.
The main difference is that 'struct json_escaped' is now 'struct
json_escape', so we replace that immediately.
The difference between lightningd's json-writing ringbuffer and the
more generic ccan/json_out is that the latter has a better API and
handles escaping transparently if something slips through (though
it does offer direct accessors so you can mess things up yourself!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This new parameter takes a list of outpoints (as txid:vout) and fund a channel from the corresponding utxos.
Example : fundchannel <id> 10000 normal 1 [10767f0db0e568127fffd7f70a154d4599f42d62babf63230a7c3378bfce3cb0:0, c9e040e0b5fc8c59d5e7834108fbc5583001f414dd83faf0a05cff9d1a92d32c:0]
Take into account the fee we'd have to pay if we're the funder, and
also drop to 0 if the amount is less than the smallest HTLC the peer
will accept.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This was incorrectly handled before, hence the wrapper which checks
correctness of the arguments.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Since we add the transactions while processing the blockchain, and before we
have enough context to annotate them correctly, i.e., in the txwatches, we add
them first and then annotate them aposteriori.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Mainly used to differentiate channel-related transactions from on-chain wallet
transactions. Will be used to filter `listtransaction` results and bundle
transactions that belong to the same channel.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
I was bumping against some blocksync performance issues with 12k+ keys, 24k+
scriptpubkeys being checked against, and migrating that list to a hashset is
an easy fix to shave off 99% of the time to process a block.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
- Related Changes for `warning` notification
Add a `bool` type parameter in `log_()` and `lov()`, this `bool` flag
indicates if we should call `warning` notifier.
1) The process of copying `log_book` of every peer to the `log_book` of
`ld` is usually included in `log_()` and `lov()`, and it may lead to
repeated `warning` notification. So a `bool`, which explicitly indicates
if the `warning` notification is disabled during this call, is necessary
.
2) The `LOG_INFO` and `LOG_DEBUG` level don't need to call
warning, so set that `bool` paramater as `FALSE` for these log level and
only set it as `TRUE` for `LOG_UNUAUSL`/`LOG_BROKEN`. As for `LOG_IO`,
it use `log_io()` to log, so we needn't think about notifier for it.
We reserve inputs when we're going to send a transaction, but we don't
unreserve them if we crash. This is most graphically demonstrated by
the txprepare case, which makes it easier to trigger.
Instead, we should query bitcoind to see whether the tx made it out or
not, as we would do manually with dev-rescan-outputs.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This allows you to prepare a tx, then release or discard it later.
Shares almost all the code with json_withdraw (which is now technically
superfluous).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We currently allocate utxos off cmd, but the next commit will persist a
wtx beyond the command which created it, breaking that assumption.
In general, a struct member should be owned by the struct itself, and
a tal context should be an explicit arg, not implicit.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We generally want to do as much validation as possible inside
parameter parsing, as that means the 'check' command detects more
erroneous uses. In this case, we can try to interpret the destination
address as soon as we encounter it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As a side-effect, we now only add txfilters for addresses we actually
expose, rather than always filtering for both p2sh and native segwit.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It would always return bech32; fix that, and don't bother printing
it if they use the (new) 'all' parameter.
This API was introduced in 3e67c09d5e,
which means it wasn't in a release so no CHANGELOG entry necessary.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Keeping the uintmap ordering all the broadcastable messages is expensive:
130MB for the million-channels project. But now we delete obsolete entries
from the store, we can have the per-peer daemons simply read that sequentially
and stream the gossip itself.
This is the most primitive version, where all gossip is streamed;
successive patches will bring back proper handling of timestamp filtering
and initial_routing_sync.
We add a gossip_state field to track what's happening with our gossip
streaming: it's initialized in gossipd, and currently always set, but
once we handle timestamps the per-peer daemon may do it when the first
filter is sent.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Encapsulating the peer state was a win for lightningd; not surprisingly,
it's even more of a win for the other daemons, especially as we want
to add a little gossip information.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
A new string field is added to the command structure and is specified at the creation of each native command, and in the JSON created by 'json_add_help_command()'.
New fields don't have to be spelled out twice.
The raw version are called _only, so we don't miss a call
accidentally. We can rename them when we finally deprecated old
fields.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Instead of lightningd telling us when it's ready, we ask it.
This also provides an opportunity to have a plugin hook at this point.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The original idea is to "tal" channel on the "ctx"(In fact, we'd like to set ctx as "ld").
But we already tal channel on "ld" in new_channel(), so "ctx" is unused.
These are always handed to subdaemons as a set, so group them. This makes
it easier to add an fd (in the next patch).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The chainparams are needed to know the prefixes, so instead of passing down
the testnet, we pass the entire params struct.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
68fe5eacde introduced a skip in the iteration
of the available funds, which means utxos[i] may be off the end of utxos.
Reported-and-debugged-by: @nitramiz
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The old value of 1000 sat was too small to cover the dust reserves.
This lead to the situation when trying to open a channel with minimal
amount, the channels got refused because they were not able cover the
commitment fees.
For this reason the minimal capacity should be increased to i.e. 10k
satoshi, as the technical minimum that also accounts for fees and
reserves is somewhere around 6k sat.
This fixes block parsing on testnet; specifically, non-standard tx versions.
We hit a type bug in libwally (wallt_get_secp_context()) which I had to
work around for the moment, and the updated libsecp adds an optional hash
function arg to the ECDH function.
Fixes: #2563
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We're going to make it async, so start by moving the core code into
invoice.c and having that directly call fail/success functions for the
htlc.
We add an extra check in fulfill_htlc() that the HTLC state is correct:
that can't happen now, but may once we're async.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We'd like to display the receive and resolution times in the forwardings
table. In order to remember the receive time we need to store it in the DB
along with the other information.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
I tried to just do gossipd, but it was uncontainable, so this ended up being
a complete sweep.
We didn't get much space saving in gossipd, even though we should save
24 bytes per node.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Node ids are pubkeys, but we only use them as pubkeys for routing and checking
gossip messages. So we're packing and unpacking them constantly, and wasting
some space and time.
This introduces a new type, explicitly the SEC1 compressed encoding
(33 bytes). We ensure its validity when we load from the db, or get it
from JSON. We still use 'struct pubkey' for peer messages, which checks
validity.
Results from 5 runs, min-max(mean +/- stddev):
store_load_msec,vsz_kb,store_rewrite_sec,listnodes_sec,listchannels_sec,routing_sec,peer_write_all_sec
39475-39572(39518+/-36),2880732,41.150000-41.390000(41.298+/-0.085),2.260000-2.550000(2.336+/-0.11),44.390000-65.150000(58.648+/-7.5),32.740000-33.020000(32.89+/-0.093),44.130000-45.090000(44.566+/-0.32)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Pubkeys are not not actually DER encoding, but Pieter Wuille corrected
me: it's SEC 1 documented encoding.
Results from 5 runs, min-max(mean +/- stddev):
store_load_msec,vsz_kb,store_rewrite_sec,listnodes_sec,listchannels_sec,routing_sec,peer_write_all_sec
38922-39297(39180.6+/-1.3e+02),2880728,41.040000-41.160000(41.106+/-0.05),2.270000-2.530000(2.338+/-0.097),44.570000-53.980000(49.696+/-3),32.840000-33.080000(32.95+/-0.095),43.060000-44.950000(43.696+/-0.72)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
- add config value min_capacity_sat that will replaces the magic value
min_effective_htlc_capacity = AMOUNT_MSAT(1000000)
- add config switch min_capacity_sat
wallet/test/run-wallet was failing the valgrind check; turns out
`sqlite3_expanded_sql` expects you to manage the memory of strings
it returns. from `sqlite3.h`:
** ^The string returned by sqlite3_expanded_sql(P), on the other hand,
** is obtained from [sqlite3_malloc()] and must be free by the application
** by passing it to [sqlite3_free()].
Adding a giant IO message simply causes it to be pruned immediately,
so truncate it if it's more than 1/64 the max size.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I was tempted to create a new db_select_stmt wrapper type, but that means
a lot of boilerplate around binding, which expects to work with db_prepare
*and* db_select_prepare.
This lets us clearly differentiate between db queries (which don't need to
go to a plugin) and db changes (which do).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. Rename channel_funding_locked to channel_funding_depth in
channeld/channel_wire.csv.
2. Add minimum_depth in struct channel in common/initial_channel.h and
change corresponding init function: new_initial_channel().
3. Add confirmation_needed in struct peer in channeld/channeld.c.
4. Rename channel_tell_funding_locked to channel_tell_depth.
5. Call channel_tell_depth even if depth < minimum, and still call
lockin_complete in channel_tell_depth, iff depth > minimum_depth.
6. channeld ignore the channel_funding_depth unless its >
minimum_depth(except to update billboard, and set
peer->confirmation_needed = minimum_depth - depth).
- Intrduce DB update `channel` values: `feerate_base` and `feerate_ppm`
- Make fist use of now context realted DB migration
- Add `struct channel` members of the same name
- Use struct values instead of config when commiting new channels
This will add the testnet config copyNpaste to test_utils.c,
so that the test stups can set these.
Alternatively, to reduce code duplication, we can move the
testnet_config and mainnet_config from options.c to options.h.
Allow a function as well as (or instead of!) an sql statement. That
will let us do things like set per-channel values to the global
defaults, for example.
Since we remove the NULL termination, the final entry is ARRAY_SIZE()-1
not ARRAY_SIZE()-2.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
More efficient to measure the ARRAY_SIZE(), which is a runtime
constant. We move it into the unit test.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Below this code appears:
if (current != orig)
db_exec(__func__, db,
"INSERT INTO db_upgrades VALUES (%i, '%s');",
orig, version());
But since the loop pre-increments current, this is always true. I wondered
why there were so many duplicates in my db_upgrades table!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This field was used by `pay` to hold the bolt11 description if the bolt11
string used `h` to hash the description (which nobody ever did). If the
`h` field wasn't present, it could contain anything, as it wasn't checked.
It's really useful to have a label for payments (eg. '1 Cuban'), but adding
yet-another option would be painful, so we simply rename 'description'
to 'label' except inside the db.
This means we need to do some tricky parameter parsing to handle array
and keyword JSON arguments, but only until we remove the old name.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Without this, there's no proof of payment, since it is the signed invoice
that make the receipt valid.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In particular this matches the case of `their_unilateral/to_us` outputs, which
were missing their addresses so far.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
In order to avoid having to ask the HSM for public keys to
their_unilateral/to_us outputs we just store the `scriptPubkey` with the UTXO,
which can then be converted to the P2WPKH address.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We want to disallow using unconfirmed outputs by default, so making the
default 1 confirmation seems a good idea. This also matches `bitcoind`s
minimum confirmation requirement.
Arming however breaks some of our tests, so I used `minconf=0` for the
breaking tests and added a new test specifically for the `minconf` parameter
for `fundchannel`.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This allows us to specify that an output must have been confirmed before the
given maximum height. This allows us to specify a minimum number of
confirmations for an output to be selected.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We need to do it in various places, but we shouldn't do it lightly:
the primitives are there to help us get overflow handling correct.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As a side-effect of using amount_msat in gossipd/routing.c, we explicitly
handle overflows and don't need to pre-prune ridiculous-fee channels.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Using param_tok is generally deprecated, as it doesn't give any sanity checking
for the JSON 'check' command. So make param_wtx usable directly, and
also make it have a struct amount_sat.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
They're generally used pass-by-copy (unusual for C structs, but
convenient they're basically u64) and all possibly problematic
operations return WARN_UNUSED_RESULT bool to make you handle the
over/underflow cases.
The new #include in json.h means we bolt11.c sees the amount.h definition
of MSAT_PER_BTC, so delete its local version.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Final step for the `peer_connected` hook, we parse the result and act
accordingly. Currently we just close the underlying connection, but we
may want to clean up peers that did not end up with a channel.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This hook is used to let a plugin decide whether we should continue
with the connection normally, or whether we should be dropping the
connection. Possible use-cases include policy enforcement (dropping
connections based on previous interactions), draining a node by
allowing only peers with an active channel to reconnect, or
temporarily preventing a channel from making progress.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We were not correctly allocating the `db->filename`, failing to copy the
null-terminator. This was causing and error when reopening the database after
the call to `fork()`.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Reported-by: Sean McNally <@sfmcnally>
Changelog-fixed: Fixed a crash when running in daemon-mode due to db filename overrun
We need to still accept it when parsing the database, but this flag
should allow upgrade testing for devs building on top
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We store it in a strmap. This means we call the jsonrpc handler earlier,
so all callers need to call param() before they do anything else; only
json_listaddrs and json_help needed fixing.
Plugins still use '[usage]' for now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Add the change output to owned_txfilter so its entry in db will
get a confirmation_height when detected in a block by filter_block_txs
before this commit, after a 'withdraw' command, 'listfunds' would
not show our change outputs as confirmed
Modified the log message in wallet_extract_owned_outputs to
append 'CONFIRMED' when it is called with a blockheight arg.
To make distinction between (1st call) when adding owned output to the
db and (2th call) when confirmed in block.
We had a bug 0ba547ee10 caused by
short_channel_id overflow. If we'd caught this, we'd have terminated
the peer instead of crashing, so add appropriate checks.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I upgraded my node with --disable-compat, and a heap of channels closed like:
CHANNELD_NORMAL:We disagree on short_channel_ids: I have 557653x0x1351, you say 557653x2373x1",
This is because the scids are strings in the databases, and it failed to parse
them properly.
Now we'll not start if that happens.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Christian and I both unwittingly used it in form:
*tal_arr_expand(&x) = tal(x, ...)
Since '=' isn't a sequence point, the compiler can (and does!) cache
the value of x, handing it to tal *after* tal_arr_expand() moves it
due to tal_resize().
The new version is somewhat less convenient to use, but doesn't have
this problem, since the assignment is always evaluated after the
resize.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We currently use 'all-zeroes' as 'unknown', but NULL is more natural
even if we have to send it as all-zeroes over the wire due to
expressiveness limitations in our generation code.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Obviously the Facebook relationship status joke was a bit subtle, but I've
continued it anyway because I'm especially susceptible to Dad jokes.
Suggested-by: @niftynei
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This causes a compiler warning if we don't do something with the
result (hopefully return immediately!).
We use was_pending() to ignore the result in the case where we
complete a command in a callback (thus really do want to ignore
the result).
This actually fixes one bug: we didn't return after command_fail
in json_getroute with a bad seed value.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Usually, this means they return 'command_param_failed()' if param()
fails, and changing 'command_success(); return;' to 'return
command_success()'.
Occasionally, it's more complex: there's a command_its_complicated()
for the case where we can't exactly determine what the status is,
but it should be considered a last resort.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Handers of a specific form are both designed to be used as callbacks
for param(), and also dispose of the command if something goes wrong.
Make them return the 'struct command_result *' from command_failed(),
or NULL.
Renaming them just makes sense: json_tok_XXX is used for non-command-freeing
parsers too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
These routines free the 'struct command': a common coding error is not
to return immediately.
To catch this, we make them return a non-NULL 'struct command_result
*', and we're going to make the command handlers return the same (to
encourage 'return command_fail(...)'-style usage).
We also provide two sources for external use:
1. command_param_failed() when param() fails.
2. command_its_complicated() for some complex cases.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
json_escaped.[ch], param.[ch] and jsonrpc_errors.h move from lightningd/
to common/. Tests moved too.
We add a new 'common/json_tok.[ch]' for the common parameter parsing
routines which a plugin might want, taking them out of
lightningd/json.c (which now only contains the lightningd-specific
ones).
The rest is mainly fixing up includes.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This (will) avoid the plugin having to walk back from the params object
as it currently does.
No code changes; I removed UNUSED and UNNEEDED labels from the other
parameters though (as *every* json_rpc callback needs to call param()
these days, they're *always* used).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is prep work for when we sign htlc txs with
SIGHASH_SINGLE|SIGHASH_ANYONECANPAY.
We still deal with raw signatures for the htlc txs at the moment, since
we send them like that across the wire, and changing that was simply too
painful (for the moment?).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
For onchaind we need to remove globals from memleak consideration;
we also change the htlc pointer to an htlc copy, which simplifies
things as well.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We probably also want to call secp_randomise/wally_secp_randomize here
too, and since these calls all call setup_tmpctx, it probably makes
sense to have a helper function to do all that. Until thats done, I
modified the tests so grepping will show the places where the sequence
of calls is repeated.
Signed-off-by: Jon Griffiths <jon_p_griffiths@yahoo.com>
We promote 'struct json_stream' to contain the membuf; we only attach
the json_stream to the command when we actually call
json_stream_success / json_stream_fail.
This means we are closer to 'struct json_stream' being an independent
layer; the tests are already modified to use it directly to create
JSON.
This is also the first step toward re-enabling non-serial command
execution.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We always have an addr entry in the db (though it may be an ephemeral socket
the peer connected in from). We don't have to handle a NULL address.
While we're there, simplify new_peer not to take the features args;
the caller who cares immediately updates the features anyway.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If there are two HTLCs with the same preimage, lightningd would always
find the first one. By including the id in the `struct htlc_stub`
it's both faster (normal HTLC lookup) and allows lightningd to detect
that onchaind wants to fail both of them.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Such an API is required for when we stream it directly. Almost all our
handlers fit this pattern already, or nearly do.
We remove new_json_result() in favor of explicit json_stream_success()
and json_stream_fail(), but still allowing command_fail() if you just
want a simple all-in-one fail wrapper.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's the only user of them, and it's going to get optimized.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
gossip.pydiff --git a/common/test/run-json.c b/common/test/run-json.c
index 956fdda35..db52d6b01 100644
And use wallet_forward_status_in_db() everywhere in db code.
And clean up extra CHANGELOG.md entry (looks like rebase error?)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The left join should make sure we still get the results but
referencing the fields and/or attempting to write them to the JSON-RPC
result will cause unforeseen problems. So just omit if we forgot
something.
Gossipd provided a generic "get endpoints of this scid" and we only
use it in one place: to look up htlc forwards. But lightningd just
assumed that one would be us.
Instead, provide a simpler API which only returns the peer node
if any, and now we handle it much more gracefully.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If another channel has set the optional `htlc_maximum_msat` field,
we should correctly parse that field and respect it when drawing up
routes for payments.
Noted by @cdecker, the term 'local' is grossly overused, and the hout
preimage is basically only used as a sanity check (though I've just put
a FIXME there for now).
Also eliminated spurious blank line which crept into wallet.c.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
failoutchannel tells us which channel to send an update for (specifically
for temporary_channel_failure); but we don't save it into the db. It's
not even clear we should, since it's a corner case and the channel might
not even exist when we come back.
So on db restore, change such errors to WIRE_TEMPORARY_NODE_FAILURE
which doesn't need an update.
We also don't memset it to 0 in the normal case (we only access if it
failcode has the UPDATE bit set) so valgrind will trigger if we're
wrong.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We don't save them to the database, so fix things up as we load them.
Next patch will actually save them into the db, and this will become
COMPAT code.
Also: call htlc_in_check() with NULL on db load, as otherwise it aborts
internally.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We split json_invoice(), as it now needs to round-trip to the gossipd,
and uniqueness checks need to happen *after* gossipd replies to avoid
a race.
For every candidate channel gossipd gives us, we check that it's in
state NORMAL (not shutting down, not still waiting for lockin), that
it's connected, and that it has capacity. We then choose one with
probability weighted by excess capacity, so larger channels are more
likely.
As a side effect of this, we can tell if an invoice is unpayble (no
channels have sufficient incoming capacity) or difficuly (no *online*
channels have sufficient capacity), so we add those warnings.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We do this a lot, and had boutique helpers in various places. So add
a more generic one; for convenience it returns a pointer to the new
end element.
I prefer the name tal_arr_expand to tal_arr_append, since it's up to
the caller to populate the new array entry.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Now call param() even for commands that don't accept any parameters.
This is a bugfix of sorts. For example, before you could call:
bitcoin-cli getinfo blah
and the blah parameter would be ignored.
Now you will get an error: "too many parameters: got 1, expected 0"
Signed-off-by: Mark Beckwith <wythe@intrig.com>
There's no reason for the db to ever return non-NULL if it's spent. And there's
only one caller, for which that is definitely true.
Suggested-by: @cdecker
Fixes: #1934
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
That matches the other CSV names (HSM was the first, so it was written
before the pattern emerged).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's an array: we were only saving the single element; if there was more than
one changed HTLC we'd get a bad signature!
The report in #1907 is probably caused by the other side re-requesting
something we considered already finalized; to avoid this particular error,
we should set the field to NULL if there's no last_sent_commit.
I'm increasingly of the opinion we want to just save all the update
packets to the db and blast them out, instead of doing this
second-guessing dance.
Fixes: #1907
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And, reluctantly, default to bitcoind style.
"It's wrong to be right too soon."
Suggested-by: @cdecker
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We use feerate in several places, and each one really should react
differently when it's not available (such as when bitcoind is still
catching up):
1. For general fee-enforcement, we use the broadest possible limits.
2. For closingd, we use it as our opening negotiation point: just use half
the last tx feerate.
3. For onchaind, we can use the last tx feerate as a guide for our own txs;
it might be too high, but at least we know it was sufficient to be mined.
4. For withdraw and fund_channel, we can simply refuse.
Fixes: #1836
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This means we don't try to unilaterally close after a restart, *and*
we can tell onchaind to try to use the point to recover funds when the
peer unilaterally closes.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We're about to use the txwatch facility for UTXOs, where there's no channel,
so allow that the be NULL, and hand the struct lightningd which callers
want anyway.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Note that we don't actually need the output number: it's the tx itself
which is confirmed. And the next caller doesn't have it convenient, so
eliminate it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
These are not confirmed by the normal methods (wallet_can_spend is false!),
so we'll deal with them manually.
We use UTXO_FIELDS in wallet_add_utxo, too, for consistency.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This was a very simple change and allowed us to remove the special
`json_opt_tok` macro.
Moved the callback out of `common/json.c` to `lightningd/json.c` because the new
callbacks are dependent on `struct command` etc.
(I already started on `json_tok_number`)
My plan is to:
1. upgrade json_tok_X one a time, maybe a PR for each one.
2. When done, rename macros (i.e, remove "_tal").
3. Remove all vestiges of the old callbacks
4. Add new callbacks so that we no longer need json_tok_tok!
(e.g., json_tok_label, json_tok_str, json_tok_msat)
Signed-off-by: Mark Beckwith <wythe@intrig.com>
We're currently overriding fatal() with something that actually
returns, which contrasts with its declaration as NORETURN.
This breaks in the next patch which wants a real fatal() in wallet.h.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Include it as an optional field in the connect_to_peer message (it was
added before we had optional fields).
The only issue is that reconnects want it too, so again connectd hands
it back to master in connectctl_connect_failed.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
connectd tells master about every disconnection, and master knows
whether it's important to reconnect. Just get the master to invoke a new
connect command if it considers the peer important!
The only twist is timeouts: we don't want to immediately reconnect if
we've failed to connect. To solve this, connectd passes a 'delaytime'
to the master when a connection fails, and the master passes it back
when it asks for a connection.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We used to separate implicit connection requests (ie. timed retries
for important peers) and explicit ones, and send a
WIRE_CONNECTCTL_CONNECT_TO_PEER_RESULT for the latter.
In the success case, that's now redundant, since we hand the connected
peer to the master using WIRE_CONNECT_PEER_CONNECTED; we just need a
message for the failure case. And we might as well tell the master
every failure, so we don't have to distinguish internally.
This also solves a race we had before: connectd would send
WIRE_CONNECTCTL_CONNECT_TO_PEER_RESULT which completes the incoming
JSON connect command, then send WIRE_CONNECT_PEER_CONNECTED. So
there's a window where the JSON command can return, but the peer isn't
known to lightningd yet.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Previously master would fail once the channel has been negotiated,
which is terrible, since the funder will have already broadcast tx.
Now we tell them if we have an active channel, and update if it goes away.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We now simply maintain a pubkey set for connected peers (we only care
if there's a reconnect), not the entire peer structure.
lightningd no longer queries us for getpeers: it knows more than we do
already.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Prior to this, lightningd would hand uninteresting peers back to connectd,
which would then return it to lightningd if it sent a non-gossip msg,
or if lightningd asked it to release the peer.
Now connectd hands the peer to lightningd once we've done the init
handshake, which hands it off to openingd.
This is a deep structural change, so we do the minimum here and cleanup
in the following patches.
Lightningd:
1. Remove peer_nongossip handling from connect_control and peer_control.
2. Remove list of outstanding fundchannel command; it was only needed to
find the race between us asking connectd to release the peer and it
reconnecting.
3. We can no longer tell if the remote end has started trying to fund a
channel (until it has succeeded): it's very transitory anyway so not
worth fixing.
4. We now always have a struct peer, and allocate an uncommitted_channel
for it, though it may never be used if neither end funds a channel.
5. We start funding on messages for openingd: we can get a funder_reply
or a fundee, or an error in response to our request to fund a channel.
so we handle all of them.
6. A new peer_start_openingd() is called after connectd hands us a peer.
7. json_fund_channel just looks through local peers; there are none
hidden in connectd any more.
8. We sometimes start a new openingd just to send an error message.
Openingd:
1. We always have information we need to accept them funding a channel (in
the init message).
2. We have to listen for three fds: peer, gossip and master, so we opencode
the poll.
3. We have an explicit message to start trying to fund a channel.
4. We can be told to send a message in our init message.
Testing:
1. We don't handle some things gracefully yet, so two tests are disabled.
2. 'hand_back_peer .*: now local again' from connectd is no longer a message,
openingd says 'Handed peer, entering loop' once its managing it.
3. peer['state'] used to be set to 'GOSSIPING' (otherwise this field doesn't
exist; 'state' is now per-channel. It doesn't exist at all now.
4. Some tests now need to turn on IO logging in openingd, not connectd.
5. There's a gap between connecting on one node and having connectd on
the peer hand over the connection to openingd. Our tests sometimes
checked getpeers() on the peer, and didn't see anything, so line_graph
needed updating.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The easiest way to do this is to play with the 'wallet_tx' semantics
and have 'amount' have meaning even when 'all_funds' is set.
Note that we change the string 'Cannot afford funding transaction' to
'Cannot afford transaction' as this code is also used for withdrawls.
Inspired-by: molz on #c-lightning
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In several places we use low-level tal functions because we want the
label to be something other than the default. ccan/tal is adding
tal_*_label so replace them and shim it for now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
tal_count() is used where there's a type, even if it's char or u8, and
tal_bytelen() is going to replace tal_len() for clarity: it's only needed
where a pointer is void.
We shim tal_bytelen() for now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This seems like a premature optimization: it tried to cut down the number of
allocations by reusing the same `struct invoice_details` while iterating through
a number of results. But this sidesteps the checks by `valgrind` and we'd miss a
missing field that was set by the previous iteration.
Reported-by: @rustyrussell
Signed-off-by: Christian Decker <@cdecker>
`wallet_stmt2payment` always expects the same fields in the same order, so we
should make sure that we always fetch them in that order and all of them.
Several users have noticed that they cannot pay satoshis.place or similar places
that have tiny payment amounts if they are not directly connected. This is due
to the forwarding fee dominating the transferred amount.
This commit adds a new option, exempting tiny fees (up to 5 satoshis by default)
from having to pass the maxfeepercent flag. While we could have told users to
tweak maxfeepercent I think it is usefull to have a default exemption.
[Squashed --RR]
gossip_getnodes_entry was used by gossipd for reporting nodes, and for
reporting peers. But the local_features field is only available for peers,
and most other fields are only available from node_announcement.
Note that the connectd change actually means we get less information
about peers: gossipd used to do the node lookup for peers and include the
node_announcement information if it had it.
Since generate_wire.py can't create arrays-of-arrays, we add a 'struct
peer_features' to encapsulate the two feature arrays for each peer, and
for convenience we add it to lightningd/gossip_msg.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The manpage did not specify the name of the named parameter (addresstype).
It does now.
Fixed manpage grammar errors.
Signed-off-by: Mark Beckwith <wythe@intrig.com>
Removed `json_get_params`.
Also added json_tok_percent and json_tok_newaddr. Probably should
have been a separate PR but it was so easy.
[ Squashed comment update for gcc workaround --RR ]
Signed-off-by: Mark Beckwith <wythe@intrig.com>
I crashed the HSMD, and it gave no output at all. That's because we
were only reading the status fd when we were waiting for a reply.
Fix this by using a separate request fd and status fd, which also means
that hsm_sync_read() is no longer required.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Well, it's generated by shachain, so technically it is a sha256, but
that's an internal detail. It's a secret.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
structeq() is too dangerous: if a structure has padding, it can fail
silently.
The new ccan/structeq instead provides a macro to define foo_eq(),
which does the right thing in case of padding (which none of our
structures currently have anyway).
Upgrade ccan, and use it everywhere. Except run-peer-wire.c, which
is only testing code and can use raw memcmp(): valgrind will tell us
if padding exists.
Interestingly, we still declared short_channel_id_eq, even though
we didn't define it any more!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We're telling gossipd about disconnections anyway, so let's just use that signal
to disable both sides of the channel.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Until now, `command_fail()` reported an error code of -1 for all uses.
This PR adds an `int code` parameter to `command_fail()`, requiring the
caller to explicitly include the error code.
This is part of #1464.
The majority of the calls are used during parameter validation and
their error code is now JSONRPC2_INVALID_PARAMS.
The rest of the calls report an error code of LIGHTNINGD, which I defined to
-1 in `jsonrpc_errors.h`. The intention here is that as we improve our error
reporting, all occurenaces of LIGHTNINGD will go away and we can eventually
remove it.
I also converted calls to `command_fail_detailed()` that took a `NULL` `data`
parameter to use the new `command_fail()`.
The only difference from an end user perspecive is that bad input errors that
used to be -1 will now be -32602 (JSONRPC2_INVALID_PARAMS).
Just have a "new depth" callback, and let channeld do the right thing.
This makes the channeld paths a bit more straightforward.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Tor wasn't actually working for me to connect to anything, but it worked
for 'ssh -D' testing.
Note that the resulting 'netaddr' is a bit weird, but I guess it's honest.
$ ./cli/lightning-cli connect 021f2cbffc4045ca2d70678ecf8ed75e488290874c9da38074f6d378248337062b
{
"id": "021f2cbffc4045ca2d70678ecf8ed75e488290874c9da38074f6d378248337062b"
}
$ ./cli/lightning-cli listpeers
{
"peers": [
{
"state": "GOSSIPING",
"id": "021f2cbffc4045ca2d70678ecf8ed75e488290874c9da38074f6d378248337062b",
"netaddr": [
"ln1qg0je0lugpzu5ttsv78vlrkhteyg9yy8fjw68qr57mfhsfyrxurzkq522ah.lseed.bitcoinstats.com:9735"
],
"connected": true,
"owner": "lightning_gossipd"
}
]
}
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Risks leakage. We could do lookup via the proxy, but that's a TODO.
There's only one occurance of getaddrinfo (and no gethostbyname), so
we add a flag to the callers.
Note: the use of --always-use-proxy suppresses *all* DNS lookups, even
those from connect commands and the command line.
FIXME: An implicit setting of use_proxy_always is done in gossipd if it
determines that we are announcing nothing but Tor addresses, but that
does *not* suppress 'connect'.
This is fixed in a later patch.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a rebased and combined patch for Tor support. It is extensively
reworked in the following patches, but the basis remains Saibato's work,
so it seemed fairest to begin with this.
Minor changes:
1. Use --announce-addr instead of --tor-external.
2. I also reverted some whitespace and unrelated changes from the patch.
3. Removed unnecessary ';' after } in functions.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. Add special option where an empty host means 'wildcard for IPv4 and/or IPv6'
which means ':1234' can be used to set only the portnum.
2. Only add this protocol wildcard if --autolisten=1 (default)
and no other addresses specified.
3. Pass it down to gossipd, so it can handle errors correctly: in most cases,
it's fatal not to be able to bind to a port, but for this case, it's OK
if we can only bind to one of IPv4/v6 (fatal iff neither).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This replacement is a little menial, but it explicitly catches all
the places where we allow a local socket. The actual implementation of
opening a AF_UNIX socket is almost hidden in the patch.
The detection of "valid address" is now more complex:
p->addr.itype != ADDR_INTERNAL_WIREADDR || p->addr.u.wireaddr.type != ADDR_TYPE_PADDING
But most places we do this, we should audit: I'm pretty sure we can't
get an invalid address any more from gossipd (they may be in db, but
we should fix that too).
Closes: #1323
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
No new functionality, just a continuation of my work toward completing #665.
I removed the common members of `struct withdrawal` and `struct fund_channel`
and placed them in a new `struct wallet_tx`. Then it was fairly straightforward
to reimplement the existing code in terms of `wallet_tx`.
Since I made some structural changes I wanted to get this approved before I
go any farther.
Added 'all' to fundchannel help message.
We're getting spurious closures, even on mainnet. Using --ignore-fee-limits
is dangerous; it's slightly less so to lower the minimum (which is the
usual cause of problems).
So let's halve it, but beware the floor.
This is a workaround, until we get independent feerates in the spec.
Fixes: #613
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I would have liked to make it a tal object, then we'd catch most
things with our memleak detection. However, sqlite3 doesn't seem to
allow allocator overrides.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is the cause of 'sqlite3_close: unable to close due to unfinalized statements or unfinished backups' with the --daemon option.
Fixes: #1420
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Currently we intuit it from the fd being closed, but that may happen out
of order with when the master thinks it's dead.
So now if the gossip fd closes we just ignore it, and we'll get a
notification from the master when the peer is disconnected.
The notification is slightly ugly in that we have to disable it for
a channel when we manually hand the channel back to gossipd.
Note: as stands, this is racy with reconnects. See the next patch.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(This was sitting in my gossip-enchancement patch queue, but it simplifies
this set too, so I moved it here).
In 94711969f we added an explicit gossip_index so when gossipd gets
peers back from other daemons, it knows what gossip it has sent (since
gossipd can send gossip after the other daemon is already complete).
This solution is insufficient for the more general case where gossipd
wants to send other messages reliably, so replace it with the other
solution: have gossipd drain the "gossip fd" which the daemon returns.
This turns out to be quite simple, and is probably how I should have
done it originally :(
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. Lifetime of 'struct reaching' now only while we're actively doing connect.
2. Always free after a single attempt: if it's an important peer, retry
on a timer.
3. Have a single response message to master, rather than relying on
peer_connected on success and other msgs on failure.
4. If we are actively connecting and we get another command for the same
id, just increment the counter
The result is much simpler in the master daemon, and much nicer for
reconnection: if they say to connect they get an immediate response,
rather than waiting for 10 retries. Even if it's an important peer,
it fires off another reconnect attempt, unless it's actively
connecting now.
This removes exponential backoff: that's restored in next patch. It
also doesn't handle multiple addresses for a single peer.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And on channel_fail_permanent and closing (the two places we drop to
chain), we tell gossipd it's no longer important.
Fixes: #1316
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The no-rescan change requires us to rescan one last time from the first_blocknum
of our channels (if we have any). The migrations just drop blocks that are
higher, then insert a dummy with the first_blocknum, and then clean up after
us. If we don't have any channels we don't go back at all.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Simplification of the offset calculation to use the rescan parameter, and rename
of `wallet_first_blocknum`. We now use either relative rescan from our last
known location, or absolute if a negative rescan was given. It's all handled in
a single location (except the case in which the blockcount is below our
precomputed offset), so this should reduce surprises.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
