connectd will be keeping the conn open, so it needs to free this
"conn_timeout" timer. Pass it through, so we can do that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. Adds the missing DNS error massages so they can be handled by
connect_control.
2. Prepends a 'All addresses failed' to code 401 message, so we
always have at least some error message to the user.
Changelog-None
And turn "" includes into full-path (which makes it easier to put
config.h first, and finds some cases check-includes.sh missed
previously).
config.h sets _GNU_SOURCE which really needs to be done before any
'#includes': we mainly got away with it with glibc, but other platforms
like Alpine may have stricter requirements.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We would fail connectd when listening on the IPv6 version failed; instead we should
allow that.
Changelog-Experimental: experimental-websocket-port fixed to work with default addresses.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
blob[] is really a string from the commandline; leave it as a char.
And parsing is much simpler than this code makes it seem!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
October was the date Torv2 is no longer supported by the Tor Project;
it will probably not work at all by next release, so we should remove
it now even though it's not quite the 6 months we prefer for
deprecation cycles.
I still see 110 nodes advertizing Torv2 (vs 10,292 Torv3); we still
parse and display it, we just don't advertize or connect to it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If the port is set, we spawn it (lightning_websocketd) on any
connection to that port. That means websocketd is a per-peer daemon,
but it means every other daemon uses the connection normally (it's
just actually talking to websocketd instead of the client directly).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Before:
Ten builds, laptop -j5, no ccache:
```
real 0m36.686000-38.956000(38.608+/-0.65)s
user 2m32.864000-42.253000(40.7545+/-2.7)s
sys 0m16.618000-18.316000(17.8531+/-0.48)s
```
Ten builds, laptop -j5, ccache (warm):
```
real 0m8.212000-8.577000(8.39989+/-0.13)s
user 0m12.731000-13.212000(12.9751+/-0.17)s
sys 0m3.697000-3.902000(3.83722+/-0.064)s
```
After:
Ten builds, laptop -j5, no ccache: 8% faster
```
real 0m33.802000-35.773000(35.468+/-0.54)s
user 2m19.073000-27.754000(26.2542+/-2.3)s
sys 0m15.784000-17.173000(16.7165+/-0.37)s
```
Ten builds, laptop -j5, ccache (warm): 1% faster
```
real 0m8.200000-8.485000(8.30138+/-0.097)s
user 0m12.485000-13.100000(12.7344+/-0.19)s
sys 0m3.702000-3.889000(3.78787+/-0.056)s
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This renames all occurences of use_proxy_always to always_use_proxy
to keep it inline with config values. This was a bit confusing.
Only significant change is that the payload in the plugins init
requests also contained the old name. No plugin currently seems to make
use of this variable yet. The old name 'use_proxy_always' is added when
deprecated APIs is enabled.
Changelog-Deprecated: Plugins: Renames plugin init 'use_proxy_always' to 'always_use_proxy'
This does two things:
- It moves non-tor addresses upfront so it prefers normal connection
which are less laggy and more reliable.
- It prevents connectd from trying the same wire_addr twice when the
addr_hint was given and gossip also added the same address.
Changelog-Changed: connectd: try non-TOR connections first
Changelog-Fixed: connectd: do not try address hint twice
In fact, we make it compulsory, which means if you don't understand it
you'll hang up on us!
Add some logging for that in future.
Changelog-Changed: Protocol: All new invoices require a payment_secret (i.e. modern TLV format onion)
Changelog-Changed: Protocol: We can no longer connect to peers which don't support `payment_secret`.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I did this by copying the updated bech32 code, and then re-patching in
our minor changes:
1. Headers modded (we need size_t)
2. Explicit length for bech32_encode/decode (not 90).
3. Exposing and bech32_ prefix for convert_bits, charset, charset_rev.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Currently we abuse openingd and dualopend to do this, but connectd already
has the ability to talk to peers, so it's more efficient.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This matters: if we connected, the address is probably usable for future connections.
But if they connected, the port is probably not (but the IP address may be).
Changelog-Added: JSON-RPC: `connect` returns "direction" ("in": they iniatated, or "out": we initiated)
Changelog-Added: plugins: `peer_connected` hook and `connect` notifications have "direction" field.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
No more sending "all-channel" errors; in particular, gossipd now only
sends warnings (which make us hang up), not errors, and peer_connected
rejections are warnings (and disconnect), not errors.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Plugins: `peer_connected` rejections now send a warning, not an error, to the peer.
Took me a while (stressing under valgrind) to reproduce this,
then longer to figure out how it happened.
Turns out io_new_conn() can fail if the init function fails.
In our case, this can happen if connect() immediately returns
an error (inside io_connect). But we've already set the finish
function, which (if this was the last address), will free connect,
making the assignment `connect->conn = ...` write to a freed address.
Either way, if it fails, try_connect_one_addr() has taken care to
update connect->conn, or free connect, and the caller should not do it.
Here's the valgrind trace:
```
==384981== Invalid write of size 8
==384981== at 0x11127C: try_connect_one_addr (connectd.c:880)
==384981== by 0x112BA1: destroy_io_conn (connectd.c:708)
==384981== by 0x141459: destroy_conn (poll.c:244)
==384981== by 0x14147F: destroy_conn_close_fd (poll.c:250)
==384981== by 0x149EB9: notify (tal.c:240)
==384981== by 0x149F8B: del_tree (tal.c:402)
==384981== by 0x14A51A: tal_free (tal.c:486)
==384981== by 0x140036: io_close (io.c:450)
==384981== by 0x1400B3: do_plan (io.c:401)
==384981== by 0x140134: io_ready (io.c:423)
==384981== by 0x141A57: io_loop (poll.c:445)
==384981== by 0x112CB0: main (connectd.c:1703)
==384981== Address 0x4d67020 is 64 bytes inside a block of size 160 free'd
==384981== at 0x483CA3F: free (in /usr/lib/x86_64-linux-gnu/valgrind/vgpreload_memcheck-amd64-linux.so)
==384981== by 0x14A020: del_tree (tal.c:421)
==384981== by 0x14A51A: tal_free (tal.c:486)
==384981== by 0x1110C5: try_connect_one_addr (connectd.c:806)
==384981== by 0x112BA1: destroy_io_conn (connectd.c:708)
==384981== by 0x141459: destroy_conn (poll.c:244)
==384981== by 0x14147F: destroy_conn_close_fd (poll.c:250)
==384981== by 0x149EB9: notify (tal.c:240)
==384981== by 0x149F8B: del_tree (tal.c:402)
==384981== by 0x14A51A: tal_free (tal.c:486)
==384981== by 0x140036: io_close (io.c:450)
==384981== by 0x1405DC: io_connect_ (io.c:345)
==384981== Block was alloc'd at
==384981== at 0x483B7F3: malloc (in /usr/lib/x86_64-linux-gnu/valgrind/vgpreload_memcheck-amd64-linux.so)
==384981== by 0x149CF1: allocate (tal.c:250)
==384981== by 0x14A3C6: tal_alloc_ (tal.c:428)
==384981== by 0x1114F2: try_connect_peer (connectd.c:1526)
==384981== by 0x111717: connect_to_peer (connectd.c:1558)
==384981== by 0x1124F5: recv_req (connectd.c:1627)
==384981== by 0x1188B2: handle_read (daemon_conn.c:31)
==384981== by 0x13FBCB: next_plan (io.c:59)
==384981== by 0x140076: do_plan (io.c:407)
==384981== by 0x140113: io_ready (io.c:417)
==384981== by 0x141A57: io_loop (poll.c:445)
==384981== by 0x112CB0: main (connectd.c:1703)
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: Occasional crash in connectd due to use-after-free
Fixes: #4343
If we're already attempting to connect to a peer, we would ignore
new connection requests. This is problematic if your node has bad
connection details for the node -- you can't update it while inflight.
This patch appends new connection suggestions to the list of connections
to try.
Fixes#4154
1. Rename memleak_enter_allocations to memleak_find_allocations.
2. Unify scanning for pointers into memleak_remove_region / memleak_remove_pointer.
3. Document the functions.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is simple, and we now can multifundchannel to every node on testnet
(one simply hangs once we connect).
Changelog-Fixed: Protocol: We now hang up if peer doesn't respond to init message after 60 seconds.
This avoids overwriting the ones in git, and generally makes things neater.
We have convenience headers wire/peer_wire.h and wire/onion_wire.h to
avoid most #ifdefs: simply include those.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Note that other directories were explicitly depending on the generated
file, instead of relying on their (already existing) dependency on
$(LIGHTNINGD_HSM_CLIENT_OBJS), so we remove that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This simplifies our test matrix, as we never have to handle talking
to peers that specify one but not the other.
This is particularly important for option_anchor_outputs which
assumes option_static_remotekey.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
@thestick613 noticed that since tor version below 0.3.2.2-alpha
will not support V3 ed25519 address formats, the error handling
is not that helpful in the error message from cli.
So now we add an hint.
Changelog-None:
Signed-off-by: Saibato <saibato.naga@pm.me>
connectd/connectd.h; Add helper function to update conn error list
Signed-off-by: Saibato <saibato.naga@pm.me>
common/onion is going to need to use this for the case where it finds a blinding
seed inside the TLV. But how it does ecdh is daemon-specific.
We already had this problem for devtools/gossipwith, which supplied a
special hsm_do_ecdh(). This just makes it more general.
So we create a generic ecdh() interface, with a specific implementation
which subdaemons and lightningd can use.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's almost always "their_features" and "our_features" respectively, so
make those names clear.
Suggested-by: @cdecker
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Turns out that unnecessary: all callers can access the feature_set,
so make it much more like a normal primitive.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This will help with the next patch, where we wean off using a global
for features: connectd.c has access to the feature bits.
Since connectd might now want to send a message, it needs the crypto_state
non-const, which makes this less trivial than it would otherwise be.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
