I did some CHANGELOG and git digging to see when these were deprecated, and
some were very old (v0.8.2!). But since they didn't warn users loudly, I
chose to do so this release only.
I renamed ld's `deprecated_apis` to `deprecated_ok` to make sure I
caught them all.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Create a notification that is triggered when a `costummsg` is received.
Changelog-Added: Plugins: notification custommsg for receiving an unknown protocol message
This makes `check` much more thorough, and useful.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `check` now does much more checking on every command (not just basic parameter types).
We should use capability tests for states (can you add htlcs?) rather than vague
descriptions (are you closing?).
And as much as possible, use switch () statements to force us to think
about all the cases, especially when we add new states!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And require --developer to use them.
Also refuse redirection to deprecated APIs if deprecated APIs are disabled!
Changelog-Removed: `dev-sendcustommsg` (use `sendcustommsg`, which was added in v0.10.1)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I obviously like the word "capabilities" since I reused it to refer
to the HSM's overall features :(
Suggested-by: @ksedgwic
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We usually have access to `ld`, so avoid the global.
The only place generic code needs it is for the json command struct,
and that already has accessors: add one for libplugin and lightningd
to tell it if deprecated apis are OK.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
listconfigs is convenient, but it doesn't handle multi-options well: it
outputs an object with duplicate fields in this case (e.g. log-file), nor
is it extensible to show more than raw values.
However, listconfigs doesn't do what other list commands do (use a
sub-object "configs") so we can put the new values under that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `listconfigs` now has `configs` subobject with more information about each config option.
1. Make it the standard "return the error" pattern.
2. Rather than flags to indicate what types are allowed, have the callers
check the return explicitly.
3. Document the APIs.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is needed for the next patch, which does this from the peer_connected hook!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `sendcustommsg` can now be called by a plugin from within the `peer_connected` hook.
In various circumstances we can start a reconnection while one is
already going on. These can stockpile if the node really is unreachable.
Reported-by: @whitslack
Fixes: #5654
Changelog-Fixed: lightningd: we no longer stack multiple reconnection attempts if connections fail.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We were stressing the servers if node cannot be found. Only do lookup
on manual connect commands.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Protocol: lightningd: Only use DNS server address lookup on manual `connect` commands, not normal reconnection attempts.
This allows GDB to print values, but also allows us to use them in
'case' statements. This wasn't allowed before because they're not
constant terms.
This also made it clear there's a clash between two error codes,
so move one.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: Error code from bcli plugin changed from 400 to 500.
We used to tell connectd to remember our connect delay, and hand it
back (increased if necessary).
Instead, simply record when we last tried to connect. If it was less
than 10 minutes ago, double delay (up to 5 minutes max), otherwise
reset delay to 1 second.
This covers all scenarios: whether we reconnect then immediately
disconnect, or never successfully connect, it doesn't matter.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: #5453
We were waiting too long for the reconnect to happen (60s default),
which caused this test to timeout.
When testing, let's speed up the reconnect.
L2 tried to reconnect but didn't have connection information in its
gossip -- is there a way to ask/save connection data from a node you're
making a channel with that doesn't rely on their node_announcement?
Connectd already does this when we *receive* an error or warning, but
now do it on send. This causes some slight behavior change: we don't
disconnect when we close a channel, for example (our behaviour here
has been inconsistent across versions, depending on the code).
When connectd is told to disconnect, it now does so immediately, and
doesn't wait for subds to drain etc. That simplifies the manual
disconnect case, which now cleans up as it would from any other
disconnection when connectd says it's disconnected.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This allows us to detect when lightningd hasn't seen our latest
disconnect/reconnect; in particular, we would hit the following pattern:
1. lightningd says to connect a subd.
2. connectd disconnects and reconnects.
3. connectd reads message, connects subd.
4. lightningd reads disconnect and reconnect, sends msg to connect to subd again.
5. connectd asserts because subd is alreacy connected.
This way connectd can tell if lightningd is talking about the previous
connection, and ignoere it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Before this patch:
1. connectd says it's connected (peer_connected)
2. we tell connectd we want to talk about each channel (peer_make_active)
3. connectd gives us an fd for each channel, and we connect it to a subd (peer_active)
4. OR, connectd says it sent something about a channel we didn't tell it about, with an fd (peer_active)
Now:
1. connectd says it's connected (peer_connected)
2. we start all appropriate subds and tell connectd to what channels/fds (peer_connect_subd).
3. if connectd says it sent something about a channel we didn't tell it about, we either tell
it to hang up (peer_final_msg), or connect a new opening daemon (peer_connect_subd).
This is the minimal-size patch, which is why we create socket pairs in
so many places to use the existing functions. Many cleanups are
possible, since the new flow is so simple.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
First, connectd tells us the peer has connected, and we call the connected hook,
and if it says it's fine, we are actually connected and we fire off notifications.
Of course, we could be disconnected while in the connected hook, and that would
mean we tell people about a connection which is no longer current.
Make this clear with a tristate: if we're not marked disconnected by
the time the hooks finish, we're good. It also gives us a cleaner
"connect" command return when we connected but disconnected before
processing.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We don't have to put aside a peer which is reconnecting and wait for
lightningd to remove the old peer, we can now simply free the old
and add the new.
Fixes: #5240
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We allow connectd to tell us a peer has gone away, but now we need
to make sure we don't double-spiderman and tell it to disconnect peer.
This is particularly harmful on reconnect: it (will soon) tell us the
old connection is gone, ready to tell us the new peer has connected.
We would tell it to disconnect the peer, which throws away the new
connection!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is redundant now, since connectd only sends us this once we tell
it it's OK, but that's changing, so clean up now. This means that
connectd will be able to make *unsolicited* closes, if it needs to.
We share logic with peer_please_disconnect.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's directly a product of "does it have a current owner subdaemon"
and "does that subdaemon talk to peers", so create a helper function
which just evaluates that instead.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We have them split over common/param.c, common/json.c,
common/json_helpers.c, common/json_tok.c and common/json_stream.c.
Change that to:
* common/json_parse (all the json_to_xxx routines)
* common/json_parse_simple (simplest the json parsing routines, for cli too)
* common/json_stream (all the json_add_xxx routines)
* common/json_param (all the param and param_xxx routines)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Complete implementation of BOLT1 port derivation proposal https://github.com/lightning/bolts/pull/968
Changelog-Added: rpc: use the standard port derivation in connect command when the port is not specified.
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Looks like we woke one of the startup io_loops early, and thus
we thought we'd finished connectd_activate and we hadn't. This
caused us to use an uninitialized ld->announceable array, and
finally caused an assert fail in the main loop.
Make *every* loop assert that it was exited for the correct reason,
so if it happens again, we can maybe figure out what part of
the code to look at.
```
lightningd: lightningd/lightningd.c:1186: main: Assertion `io_loop_ret == ld' failed.
lightningd: FATAL SIGNAL 6 (version 4df66fa)
...
------------------------------- Valgrind errors --------------------------------
Valgrind error file: valgrind-errors.895509
==895509== Conditional jump or move depends on uninitialised value(s)
==895509== at 0x22C58E: to_tal_hdr_or_null (tal.c:184)
==895509== by 0x22D531: tal_bytelen (tal.c:637)
==895509== by 0x1F10B6: towire_gossipd_init (gossipd_wiregen.c:100)
==895509== by 0x13AC6E: gossip_init (gossip_control.c:254)
==895509== by 0x1497EC: main (lightningd.c:1090)
==895509==
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This seems to prevent broad propagation, due to LND not allowing it. See
https://github.com/lightningnetwork/lnd/issues/6432
We still announce it if you disable deprecated-apis, so tests still work,
and hopefully we can enable it in future.
Fixes: #5196
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: Protocol: disabled websocket announcement due to LND propagation issues
Gossipd didn't actually suppress all gossip, resulting in a flake!
Doing it in connectd now makes much more sense.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is generally verboten now, since there can be multiple. There are a
few exceptions:
1. We sometimes want to know if there are *any* active channels.
2. Some dev commands still take peer id when they mean channel_id.
3. We still allow peer id when it's fully determined.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `close` by peer id will fail if there is more than one live channel (use `channel_id` or `short_channel_id` as id arg).
