This is best-practice (to ensure prototypes match up), but there were a
few places we didn't (at least, directly). Make it a requirement,
either of form "foo.h" or <dir/foo.h>.
The noise is the change to our print templates.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
On my machine it should have produced:
/tmp/ltests-1p0v5z1j/.locks/lock-1631090663.1066182
but instead it produced:
/private/tmp/ltests-1p0v5z1j/.locks/lock-1631090663.105848
The mismatch resulted in a hang inside flock.
Path .resolve() seems to be causing problems for others as well. It appears the library was not meant to handle complex path situations and isn't maintained as such (see link reference).
Since we have already built a full path here anyway, the call to .resolve() appears redundant.
Tested on python 3.9.6 on my Mac OS X 11.4 (20F71), Xcode 12.5.1 (12E507)
Relevant discussion: https://discuss.python.org/t/pathlib-absolute-vs-resolve/2573
This affects the range we offer even without quick-close, but it's
more critical for quick-close.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSONRPC: `close` now takes a `feerange` parameter to set min/max fee rates for mutual close.
This only happens when a deletion is added by a running gossipd, so
we put a deletion at the end of the store to test it.
mypy noticed that this code was nonsensical, so clearly untested.
The testing noticed that making a nodeid from a string was also buggy.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Mainly fixing type annotations, but some real fixes:
1. GossmapHalfchannel.from_str() should be a classmethod.
2. update_channel had weird, unusable default values (fields can't be NULL,
since we use it below).
[ There was one more occurence where isinstance should be used above
type() == xyz comparison. -- MS ]
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Do not mix bytes and GossmapNodeId when accessing Gossmap.nodes dicts.
Therefore the definion got GossmapNodeId also needed to be pulled to the
beginning of the file.
This reads the `gossip_store_channel_amount` that always follows the
`channel_announcement` messages. Therefore it uses an internal variable
_last_scid to know what channel has been added last time.
This is more efficient than converting them all to Pubkeys: about 3.8
seconds vs 5.4 seconds. Usually treating them as raw bytes is what we
want anyway.
[ Fixup by Michael Schmoock <michael@schmoock.net> ]
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It doesn't do much work, but it does parse the gossmap file and extract
nodes and channels.
[ Fixup by Michael Schmoock <michael@schmoock.net> ]
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As suggested in this issue https://github.com/python/mypy/issues/7484#issuecomment-529363083 we skip following import becuase with the recent version of mypy the __init__.py file make confusione inside the analysis (in the python issue it is unclear the main motivation of this issue. At list unclear to me).
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Without this, we cannot pip install pylightning and pyln-client in the
same environment anymore, as it tries to pull in an incompatible version
of pyln-client.
Changelog-None
The issue is that the new keyword `force_lease_closed` was being set
even if the user didn't specify it, which results in breakage if this
new pyln version talks to older c-lightning nodes that don't have this
keyword yet. By setting the default to `None` it gets filtered out if
the user has not explicitly set it, but still retains the `True` /
`False` values if they did.
Changelog-None Issue is not present in released versions
Since we now use 'compact_lease' to gate an open (if the rates have
changed, we fail), we no longer need to rely on query rates for figuring
things out, so we make it dev-only.
Changelog-Changed: JSON-API: queryrates is now developer only
We need to know what the lease we're expecting is. To do this
we pass around the hex encoded portion of the wire format.
We can use this passed in expected lease rates to confirm that the peer
is, in fact, using the same rates as what we have currently.
Changelog-Added: JSON-RPC: fundchannel, multifundchannel, and openchannel_init now accept a 'compact_lease' for any requested funds
By default, we won't close a channel that we leased to a peer.
You can override this with the `force_lease_closed` flag.
Changelog-Added: JSON-RPC: close now has parameter to force close a leased channel (option_will_fund)
Using a 'feestep' is more restrictive than you'd want, instead we
enforce that the next feerate must be at least 1/64th more than the
last, but put no upper limit on it
Includes update to lnprototest changes
Contributed-By: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Changelog-EXPERIMENTAL: Protocol: Replaces init_rbf's `fee_step` for RBF of v2 opens with `funding_feerate_perkw`, breaking change
We would fail even if a process exited cleanly after having the line we
were looking for, because we checked if it died before reading the logs.
Co-Authored-by: Daniela Brozzoni <daniela@revault.dev>
Signed-off-by: Antoine Poinsot <darosior@protonmail.com>
It sometimes fails because the two race, and sometimes because there's
randomness, but it generally works (and doesn't fail systemically).
We remove this before the final merge.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It sometimes fails because the two race, and sometimes because there's
randomness, but it generally works (and doesn't fail systemically).
We remove this before the final merge.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It sometimes fails because the two race, and sometimes because there's
randomness, but it generally works (and doesn't fail systemically).
We remove this before the final merge.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This test takes 695 seconds, because fundwallet waits for the wallet to
notice the tx, which takes 60 seconds if not DEVELOPER. Do all the waiting
at once, and this speeds the test up to 153 seconds.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This adds our first (basic) schema, and sews support into pyln-testing
so it will load schemas for any method for doc/schemas/{method}.schema.json.
All JSON responses in a test run are checked against the schema (if any).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Not an API break: reserve=true|false still works for fundpsbt and utxopsbt,
but we also allow a raw number in there.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Tests that will only run when !EXPERIMENTAL_DUAL_FUND:
@pytest.marker.openchannel('v1')
def test_...()
Tests that will only run when EXPERIMENTAL_DUAL_FUND:
@pytest.marker.openchannel('v2')
def test_...()
Users are more upset recently with the cost of unilateral closes
than they are the risk of being cheated. While we complete our
anchor implementation so we can use low fees there, let's
get less aggressive (we already have 34 or 18 blocks to close
in the worst case).
The changes are:
- Commit transactions were "2 CONSERVATIVE" now "6 ECONOMICAL".
- HTLC resolution txs were "3 CONSERVATIVE" now "6 ECONOMICAL".
- Penalty txs were "3 CONSERVATIVE" now "12 ECONOMICAL".
- Normal txs were "4 ECONOMICAL" now "12 ECONOMICAL".
There can be no perfect levels, but we have had understandable
complaints recently about how high our default fee levels are.
Changelog-Changed: Protocol: channel feerates reduced to bitcoind's "6 block ECONOMICAL" rate.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We will eventually start emitting and dispatching custom notifications
from plugins just like we dispatch internal notifications. In order to
get reasonable error messages we need to make sure that the topics
plugins are asking for were correctly registered. When doing this we
don't really care about whether the plugin that registered the
notification is still alive or not (it might have died, but
subscribers should stay up and running), so we keep a list of all
topics attached to the `struct plugins` which gathers global plugin
information.
You still shouldn't do this (you could get some transient failures),
but at least you have a decent chance if you reinstall over a running
daemon, instead of getting confusing internal errors if message
formats have changed.
Changelog-Added: lightningd: we now try to restart if subdaemons are upgraded underneath us.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: #4346
e.g. in test_closing_id we can get a spend from the first (closed) channel
in the same block as the open of the second. Half the time, we'll choose
the wrong one as scid.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This centralizes the setup.py file, and parametrizes it so it can
auto-detect which bolt we are building. It also uses trick 3 from [1]
to avoid importing the package itself during the manifest creation,
which'd cause an import error due to missing dependencies.
[1] https://packaging.python.org/guides/single-sourcing-package-version/
This would lead to errors about missing dependencies when attempting
to install using `pyhon setup.py install`. This is because the
`setup.py` file effectively is the manifest file used to discover
which dependencies are needed, so when using it to detect dependencies
we obviously don't have them yet.
See https://packaging.python.org/guides/single-sourcing-package-version/
We weren't writing out the length of a nested subtype's
dynamicarraylenght, now we do. The trick is to iterate through the
fields on a subtype (since the length field is added separately)
and to also iterate down through the otherfield values as we 'descend'
We scan config.vars to figure out if you configured developer on or off.
If it's on, we add the dev-only options to the config.
Fixes: #4400
Reported-By: Jonathan Harvey-Buschel @jharveyb
Allows us to clean up an in-progress open that we won't be completing
Changelog-Added: EXPERIMENTAL JSON-RPC: Permit user-initiated aborting of in-progress opens. Only valid for not-yet-committed opens and RBF-attempts
The semantics don't change, since `lightningd` will use false as
default as well, however setting it to something other than `None`
causes the RPC library to include the parameter in the query, and
since the parameter was introduced only in 0.9.3 and pyln may be used
with older versions this then results in an error about an unknown
parameter.
Setting this to `None` makes sure pyln filters out the argument before
calling.
Changelog-Fixed: pyln: Fixed an error when calling `listfunds` with an older c-lightning version causing an error about an unknown `spent` parameter
I had way too much fun with this and got a bit carried away with the
letter writing. The idea is to be helpful when users start the plugin
from the command line, rather than run it under the control of
lightningd. We also print detailed information about the user-visible
things such as the methods and options exposed by the plugin.
Changelog-Added: pyln: Plugins that are run from the command line print helpful information on how to configure c-lightning to include them and print metadata about what RPC methods and options are exposed.
Suggested-by: Rusty Russell <@rustyrussell>
In the case where you want a PSBT and also want the output to be added
as a change address, use `excess_as_change` = true.
Generates a change address to use. If you want to pay the excess
elsewhere, you will have to add separately.
Changelog-Added: JSON-RPC: Add new parameter `excess_as_change` to fundpsbt+utxopsbt
Since we turned many errors into warnings, we want our tests to fail
when they happen unexpectedly. We make WARNING clear in the strings
we print, too, to help out.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This 'fixes' the `wait_for` helper by removing a pointless final
`time.sleep()`, thus potentially making the method return quicker.
The old code could have had three final states:
- success() := True
- Timeout and success() := True
- Timeout and success() := False
The new code has just two final state:
- success() := True
- Timeout and success() := False
It ensures the final `time.sleep()` is just the right amount before timeout.
And more importantly making it more readable :-)
Changelog-None
We are printing `repr(obj)` which is not pretty-printed, hard to read,
and can't even be copied and inspected to JSON tools. We now print the
JSONified and indented calls and responses for easier debugging based
on solely the logs (useful for CI!).
Changelog-Added: pyln-testing: The RPC client will now pretty-print requests and responses to facilitate log-based debugging.
We were getting a couple of starvations, so we need a fair filelock. I
also wasn't too happy with the lock as is, so I hand-coded it quickly.
Should be correct, but the overall timeout will tell us how well we
are doing on CI.
We were getting a number of incompatibility warning due to the
dependencies being expressed too rigidly. This losens the requirement
definitions to being compatible with a known good version, and while
we're at it we also bump all outdated requirements.
we got rid of push_msats for dual funded channels. this assumes that hte
peer will match an equal amount of sats as ours (the df_accepter.py
plugin will do this)
This is required if we want to create a "bouncer" plugin (in my copious free time!)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `invoice` now takes an optional `cltv` parameter.
3.0.12 here:
```
pyln/testing/utils.py:9: error: Cannot find implementation or library stub for module named 'filelock'
pyln/testing/utils.py:9: error: Cannot find implementation or library stub for module named 'filelock'
pyln/testing/utils.py:9: note: See https://mypy.readthedocs.io/en/latest/running_mypy.html#missing-imports
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
A fractional satoshi value isn't really useful; rounding up loses
precision but that's why you called "whole satoshi", wasn't it?
Changelog-Changed: pyln-client: Millisatoshi has new method, `to_whole_satoshi`; *rounds value up* to the nearest whole satoshi
We need to use it for the 'df_accepter' plugin, so we get the feerate
correct.
Changelog-Added: pyln-client: `fundpsbt`/`utxopsbt` now support `min_witness_weight` param
This was causing the following error
```
Exception in thread Thread-553:
Traceback (most recent call last):
File "/usr/lib/python3.6/threading.py", line 916, in _bootstrap_inner
self.run()
File "/usr/lib/python3.6/threading.py", line 864, in run
self._target(*self._args, **self._kwargs)
File "/tmp/cirrus-ci-build/contrib/pyln-testing/pyln/testing/utils.py", line 232, in tail
self.err_logs.append(line.rstrip().decode('UTF-8', 'replace')).rstrip()
AttributeError: 'NoneType' object has no attribute 'rstrip'
[gw5] [ 33%] FAILED tests/test_misc.py::test_bitcoin_failure
```
Notice the second call to `.rstrip()` on the return value of `.append()`
Both my machine and apparently the CI tester machines regularly run
into issues with load on the system, causing timeouts (and
unresponsiveness). The throttler throttles the speed with which new
instances of c-lightning get started to avoid overloading. Since the
plugin used for parallelism when testing spawns multiple processes we
need to lock on the fs. Since we have that file open already, we'll
also write a couple of performance metics to it.
We sometimes have very specific sequences of tx broadcasts and blocks
being generated to confirm them. If the confirmation is missed the
test can completely get out of sync. Make debugging this easier by
logging what we confirmed.
Allows caller to set code and exact message to be returned.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: pyln-client: plugins can now raise RpcException for finer control over error returns.
"multi" means that specifying a parameter twice will append, not override.
Multi args are always given as a JSON array, even if only one.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Plugins: new "multi" field allows an option to be specified multiple times.
This only adds a test that currently makes sure its not possible
to init a Millisatoshi by a floating number.
Discussion:
As @gallizoltan points out, initialization with a float should be possible:
https://github.com/ElementsProject/lightning/pull/4273#discussion_r540369093
> Millisatoshi(5) / 2 currently works, and removes the half msat.
> So, I think Millisatoshi(5 / 2) should be the same.
Before this patch this fails: `Millisatoshi(42) / Millisatoshi(2)`
This is an operation that should return the ratio between the two
operands as a float number. Same goes for __floordiv__ operator `//`.
Changelog-None
We promised to deprecate the old "destination satoshi feerate utxos"
variant some time on mid-2020 so let's do just that. `txprepare`
doesn't parse it either anymore.
Changelog-Changed: pyln: `txprepare` no longer supports the deprecated `destination satoshi feerate utxos` call format.
Logs may contain non-ASCII and non-UTF8 symbols, which crashes the
tailer. It's better to replace them with a glyph representing
undecodeable symbols instead, and handle the issue further up the
call-chain.
We rely on it when logging, but didn't set it in the class, rather we
did in the sub-classes. This proved to be rather annoying to search
since it'd just fail silently and not log any output.
