We still want to test non-anchor channels, as we still support them, but
we've made it non-experimental. To test non-anchor channels, we
use dev-force-features: -23.
Changelog-Added: Protocol: `option_anchors_zero_fee_htlc_tx` enabled, no longer experimental.
Changelog-Changed: Config: `experimental-anchors` now does nothing (it's enabled by default).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Header from folded patch 'fixup!_options__make_anchors_enabled_by_default,_ignore_experimental-anchors.patch':
fixup! options: make anchors enabled by default, ignore experimental-anchors.
It then waits 10 more seconds (for plugins to call setlease, especially)
before it will update a node_announcement.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rather than take the first two from peers with committed channels, use
the most common address given by at least 2 peers, and accept the majority
from non-committed peers if there are no committed peers.
This works well with the node_announcement rework, which waits until
everyone has a chance to connect before creating the node_announcement.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This commit is a bit messy, but it tries to do the minimal switchover.
Some tests change, so those are included here.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As suggested in https://github.com/lightning/bolts/pull/1092.
We still support channels opened without it, but you can no longer open new ones without it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Protocol: `option_gossip_queries` is now required (advertized by all but 16 nodes)
We're about to make static_remotekey compulsory, but we still want to
do tests for pre-existing channels.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As suggested in https://github.com/lightning/bolts/pull/1092.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Protocol: `option_gossip_queries` is now required (advertized by all but 11 nodes)
As suggested in https://github.com/lightning/bolts/pull/1092.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Protocol: `option_data_loss_protect` is now required (advertized by all but 11 nodes)
I did some CHANGELOG and git digging to see when these were deprecated, and
some were very old (v0.8.2!). But since they didn't warn users loudly, I
chose to do so this release only.
I renamed ld's `deprecated_apis` to `deprecated_ok` to make sure I
caught them all.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This allows the user to specify the feature *by name*, and hopefully
complain to the developer to fix their code, knowing it will be removed entirely
in the next release!
Changelog-Added: config: `i-promise-to-fix-broken-api-user` allows for a one-release re-enablement of long-deprecated features.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
"Patrick, I'm sorry I doubted you."
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Config: `large-channels` is now the default, wumbology for all.
peer_htlcs has become a bit of a dumping ground: move listforwards
etc to its own file.
Also move `struct channel_info` from peer_htlcs.h to channel.h where
it more logically belongs.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We didn't write to db immediately, but waited until it the actual HTLC got
added (or failed). That way we didn't have a separate transaction to
write the payment into the db, but the complexity is not worth it: it
makes the next refactors harder, since we can't use the normal
iterator patterns like we do with the rest of the db (as we have to add
the unstored ones).
We might as well also make sendpay return immediately: we used to return
once the HTLC had been confirmed sent, since we entered it in the db
at that point, but we can keep it simple now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `recover` command to force (unused) lightningd node to restart with `--recover` flag.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As a node matures and is no longer new, it can take some time
to determine which version of `cln` it's running.
To address this, we now display the version earlier. This ensures
that even in the event of a crash, we're aware of the running version.
(cln-meta-project-py3.11) ➜ lightning git:(macros/log-version) ✗ ./lightningd/lightningd
2023-10-12T19:21:00.899Z INFO lightningd: v23.08.1-209-gae94be4-modded
2023-10-12T19:21:00.994Z INFO lightningd: Creating configuration directory /home/vincent/.lightning/bitcoin
2023-10-12T19:21:01.235Z INFO lightningd: Creating database
2023-10-12T19:21:01.279Z UNUSUAL hsmd: HSM: created new hsm_secret file
Could not connect to bitcoind using bitcoin-cli. Is bitcoind running?
Make sure you have bitcoind running and that bitcoin-cli is able to connect to bitcoind.
You can verify that your Bitcoin Core installation is ready for use by running:
$ bitcoin-cli echo 'hello world'
2023-10-12T19:21:01.349Z **BROKEN** plugin-bcli: \nCould not connect to bitcoind using bitcoin-cli. Is bitcoind running?\n\nMake sure you have bitcoind running and that bitcoin-cli is able to connect to bitcoind.\n\nYou can verify that your Bitcoin Core installation is ready for use by running:\n\n $ bitcoin-cli echo 'hello world'\n
2023-10-12T19:21:01.349Z INFO plugin-bcli: Killing plugin: exited before we sent init
The Bitcoin backend died.
Link: https://github.com/ElementsProject/lightning/issues/6374
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
If you previously configured with `--enable-developer` we turn that into `--enable-debugbuild`.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Removed: build: `--enable-developer` arg to configure (and DEVELOPER variables): use `./configure --enable-debugbuild` and `developer` setting at runtime.
Also requires us to expose memleak when !DEVELOPER, however we only
ever used the memleak tracking when the LIGHTNINGD_DEV_MEMLEAK
environment variable was set, so keep that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Currently it just defaults to the DEVELOPER compile option, but we'll
move over to this.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Config: `--developer` enables developer options and changes default to be "disable deprecated APIs".
Update the lightningd <-> channeld interface with lots of new commands to needed to facilitate spicing.
Implement the channeld splicing protocol leveraging the interactivetx protocol.
Implement lightningd’s channel_control to support channeld in its splicing efforts.
Changelog-Added: Added the features to enable splicing & resizing of active channels.
We want to access this in db migrations, which happen very early, but
runes_init needs the db, creating a circular dependency which must be
split.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This will initially be for listinvoices, but can be expanded to other
list commands.
It's documented, but it makes promises which currently don't exist:
* listinvoice does not support `index` or `start` yet.
* It doesn't actually fire when invoices change yet.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `wait`: new generic command to wait for events.
`struct log` becomes `struct logger`, and the member which points to the
`struct log_book` becomes `->log_book` not `->lr`.
Also, we don't need to keep the log_book in struct plugin, since it has
access to ld's log_book.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We usually have access to `ld`, so avoid the global.
The only place generic code needs it is for the json command struct,
and that already has accessors: add one for libplugin and lightningd
to tell it if deprecated apis are OK.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
For anchors, we need some sats sitting around in case we need to CPFP
a close.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Config: `min-emergency-msat` setting for (currently experimental!) anchor channels, to keep funds in reserve for forced closes.
Now we wire in the code which gathers configvars and parses from there;
lightningd keeps the array of configuration variables for future use.
Note that lightning-cli also needs to read the config, but it has its
own options (including short ones!) and doesn't want to use this
configvar mechanism, so we have a different API for that now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: Build: all experimental features are now runtime-enabled; no more ./configure --enable-experimental-features
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And no longer insist on opt_quiesce.
Changelog-EXPERIMENTAL: Config: `--experimental-upgrade-protocol` enables simple channel upgrades.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This finally happened on my test box; tests simply stopped. Turns out
we were spinning here, with waitpid returning -1.
Since this is during shutdown, that also explains why pytest under CI
would hang, since timeouts don't apply during test teardown!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In particular:
- Bolt 4: add route blinding construction
- Bolt 4: add blinded payments
And this means it's not experimental, so we can turn it on
by default!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: blinded payments are now supported by default (not just with `--experimental-onion-messages`)
Importantly, the code in jsonrpc.c which actually does the io_break:
```
/* Once the stop_conn conn is drained, we can shut down. */
if (jcon->ld->stop_conn == conn && jcon->ld->state == LD_STATE_RUNNING) {
/* Return us to toplevel lightningd.c */
log_debug(jcon->ld->log, "io_break: %s", __func__);
io_break(jcon->ld);
```
By having the state not set until later, we avoid running this. Of course,
we need to avoid calling the main loop when we get there, if we've already
been told to shutdown.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
At the moment only lightingd needs it, and this avoids missing any
places where we do bip32 derivation.
This uses a hsm capability to mean we're backwards compatible with older
hsmds.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: we now always double-check bitcoin addresses are correct (no memory errors!) before issuing them.
It's needed as the db and wallet is being set up (db migrations), so
it's simpler this way to always use ld->bip32_base for the next patch.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In v0.11 (71f736678f) we changed lightningd to wait for gossipd to
acknowledge blocks before updating blockheight: this resolved a problem
which lnprototest had where it wanted to know when we'd fully digested
a block.
However, it broke the syncing case: until then we don't even tell
gossipd, so this stayed at zero. We should use the current blockheight
for that corner case!
Fixes: #5894
Changelog-Fixed: JSON-RPC: `getinfo` `blockheight` no longer sits on 0 while we sync with bitcoind the first time.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The leak-detector can't find unconnected_htlcs_in on the stack and
incorrectly flags this as a leak. However, it is appropriately tal
allocated and freed.
Changelog-None
After connecting 100,000 peers with one channel each (not all at
once!), we see various places where we exhibit O(N^2) behaviour.
Fix these by keeping a map of id->peer instead of a simple
linked-list.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
```
E Global errors:
E - Node /tmp/ltests-adkwu44c/test_logging_1/lightning-2/ has memory leaks: [
E {
E "backtrace": [
E "ccan/ccan/tal/tal.c:442 (tal_alloc_)",
E "lightningd/peer_control.c:2203 (load_channels_from_wallet)",
E "lightningd/lightningd.c:1105 (main)"
E ],
E "label": "lightningd/peer_control.c:2203:struct htlc_in_map",
E "parents": [
E "lightningd/lightningd.c:107:struct lightningd"
E ],
E "value": "0x55d920a345e8"
E }
E ]
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
