Commit Graph

1224 Commits

Author SHA1 Message Date
ZmnSCPxj
86290b54d4 routing: Use 64-bit msatoshi for messages to and from routing.
Internally both payment and routing use 64-bit, but the interface
between them used 32-bit.
Since both components already support 64-bit we should use that.
2018-04-09 20:45:26 +02:00
Christian Decker
0ba687732f bitcoind: Do not copy the newline character when asking for a block
In the short_channel_id check we were copying the entire result into the next
bitcoin-cli call, including the newline character.

Signed-off-by: Christian Decker <decker.christian@gmail.com>
Reported-By: @gdassori
2018-04-09 00:21:20 +00:00
ZmnSCPxj
8a9fef2127 peer_control: Indicate how much money in the channel is spendable, given the reserve. 2018-04-08 08:23:34 +00:00
Christian Decker
a41ab650e5 master: Move pid-file creation after the daemonization
Creating the pid-file before daemonizing results in the pid-file containing the
pid of the process that started the daemon, but is now dead.

Signed-off-by: Christian Decker <decker.christian@gmail.com>
Reported-By: Torkel Rogstad @torkelrogstad
2018-04-07 19:49:40 +02:00
Rusty Russell
09c4203767 bolt11: allow multiple fallback addresses.
We can have more than one; eg we might offer both bech32 and a p2sh
address, and in future we might offer v1 segwit, etc.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2018-04-06 14:26:53 +02:00
Christian Decker
9ab28d1659 topology: Two off-by-one error when catching up with the blockchain
There are two very hard problems in software engineering:

 1. Off-by-one errors

In this case we were rolling back further than needed and we were starting the
catchup one block further than expected.

Signed-off-by: Christian Decker <decker.christian@gmail.com>
2018-04-06 06:55:41 +00:00
Rusty Russell
daa14f48f2 peer_control: don't list opening channels as connected=false.
I saw a failure in test_funding_fail():
	assert l2.rpc.listpeers()['peers'][0]['connected']

This can happen if l2 hasn't yet handed back to gossipd.  Turns out
we didn't mark uncommitted channels as connected:

	[{'id': '03afa3c78bb39217feb8aac308852e6383d59409839c2b91955b2d992421f4a41e', 'connected': False, 'channels': [{'state': 'OPENINGD', 'owner': 'lightning_openingd', 'funder': 'REMOTE', 'status': ['Incoming channel: accepted, now waiting for them to create funding tx']}]}]

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2018-04-05 19:07:23 +02:00
Rusty Russell
21fbae6df8 openingd: ensure that initial channel can cover fees and reserve.
This is probably covered by our "channel capacity" heuristic which
requires the channel be significant, but best to be explicit and sure.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2018-04-05 19:07:23 +02:00
ZmnSCPxj
f83c4ff903 wallet: Add msatoshi_to_us_min and msatoshi_to_us_max statistics for channels.
So we know how much counterparty could theoretically steal from us
 (msatoshi_to_us - msatoshi_to_us_min) and how much we could
 theoretically steal from counterparty (msatoshi_to_us_max -
 msatoshi_to_us).
For more piloting goodness.
2018-04-05 19:01:53 +02:00
ZmnSCPxj
5a267eb831 pay, payalgo: Show erring_node as compressed DER pubkey.
For consistency with other node pubkeys.
2018-04-04 14:17:07 +02:00
Rusty Russell
1764d6c907 grind_htlc_tx_fee: benchmark.
Takes 15 seconds on my laptop to do the worst-case grind:

	$ onchaind/test/run-grind_feerate 250001
	250001 iterations in 15893 msec = 63574 nsec each

It's not worth optimizing as it's 75% in libsecp:

    29.65%  run-grind_feera  run-grind_feerate  [.] secp256k1_fe_mul_inner
    23.51%  run-grind_feera  run-grind_feerate  [.] secp256k1_fe_sqr_inner
    11.04%  run-grind_feera  run-grind_feerate  [.] secp256k1_gej_double_var.part.6.constprop.34
     9.56%  run-grind_feera  run-grind_feerate  [.] secp256k1_scalar_reduce_512
     5.70%  run-grind_feera  run-grind_feerate  [.] Round

Even forcing a compile with -O3 -flto, it's only 13883 msec = 55534 nsec each.

Fixes: #291
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2018-04-04 02:31:41 +00:00
Rusty Russell
5f1c77d249 test_lightning.py: add test for onchain with different feerates.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2018-04-04 02:31:41 +00:00
Rusty Russell
6bb47276ce lightningd: put min/max feerates into db, struct channel.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2018-04-04 02:31:41 +00:00
Rusty Russell
4234321f7e onchain: get feerate min/max from master.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2018-04-04 02:31:41 +00:00
Rusty Russell
1f9ad06056 lightningd: allow us to close channel while still awaiting lockin.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2018-04-03 23:22:59 +02:00
Rusty Russell
1773b03380 channeld: accept SHUTDOWN before channel is locked.
Fixes: #1308
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2018-04-03 23:22:59 +02:00
Rusty Russell
1a4a59d221 common/daemon: common routines for all daemons.
In particular, the main daemon and subdaemons share the backtrace code,
with hooks for logging.

The daemon hook inserts the io_poll override, which means we no longer
need io_debug.[ch].  Though most daemons don't need it, they still link
against ccan/io, so it's harmess (suggested by @ZmnSCPxj).

This was tested manually to make sure we get backtraces still.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2018-04-03 14:03:28 +02:00
Rusty Russell
8975fc2ceb libwally: use their secp context for all our daemons.
I didn't convert all tests: they can still use a standalone context.
It's just marginally more efficient to share the libwally one for all
our daemons which link against it anyway.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2018-04-03 14:03:28 +02:00
ZmnSCPxj
26f7014813 payalgo: Add maximum delay.
Fixes: #1086
2018-04-03 04:29:48 +00:00
Christian Decker
63f22d70b5 gossip: Store channel deletions so we don't re-add them on restart
If we only remember the actions that added channels then we'd restore them when
re-reading the gossip_store, so put a tombstone in there to remember to delete
it. These will be cleared upon re-writing the store since the announcements wont
be written anymore.

Signed-off-by: Christian Decker <decker.christian@gmail.com>
2018-03-30 16:35:00 +02:00
Christian Decker
633f893ec4 gossip: Add function to notify gossipd about an outpoint spend
Signed-off-by: Christian Decker <decker.christian@gmail.com>
2018-03-30 16:35:00 +02:00
Christian Decker
a8d587c418 wallet: Return any eventual outpoint scid when marking it spent
Just return the short_channel_id matching the outpoint that we just marked as
spent.

Signed-off-by: Christian Decker <decker.christian@gmail.com>
2018-03-30 16:35:00 +02:00
Christian Decker
5571f2143e gossip: Added message to notify gossipd of outpoint spends
Signed-off-by: Christian Decker <decker.christian@gmail.com>
2018-03-30 16:35:00 +02:00
ZmnSCPxj
c1a43a04af payalgo: Be willing to overpay up to maxfeepercent, for privacy.
This obscures how far an intermediate hop is from the ultimate
payee, and also obscures slightly the exact payment value.

Fixes: #1089
2018-03-30 15:40:32 +02:00
ZmnSCPxj
bc5fc692d1 pay: Let sendpay modify the recorded msatoshi of payments. 2018-03-30 15:40:32 +02:00
Rusty Russell
a85ead7058 invoice: allow numeric labels again.
Fixes: #1291
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2018-03-30 00:01:10 +02:00
practicalswift
e25297dd0a Remove unused functions not covered by unit tests 2018-03-28 11:22:05 +02:00
Christian Decker
5519717144 onchaind: Pass the funding spend height through when adding a UTXO
This is necessary since we have onchaind tell us about the
their_unilateral/to_us output, after it is already in a block.

Signed-off-by: Christian Decker <decker.christian@gmail.com>
2018-03-27 23:17:17 +00:00
Christian Decker
ba7341ec87 cleanup: Make blockheights unsigned
Signed-off-by: Christian Decker <decker.christian@gmail.com>
2018-03-27 23:17:17 +00:00
Christian Decker
aba0b0e01b opening: Add the change scriptpubkey to the txfilter
This is necessary to track confirmations of or change output.

Signed-off-by: Christian Decker <decker.christian@gmail.com>
2018-03-27 23:17:17 +00:00
Christian Decker
27db2d4ce2 wallet: Also track confirmations of their_unilateral/to_us outpoints
Signed-off-by: Christian Decker <decker.christian@gmail.com>
2018-03-27 23:17:17 +00:00
practicalswift
6269a4c55d Remove unused functions not covered by unit tests 2018-03-26 23:35:56 +00:00
ZmnSCPxj
b914062465 pay: Also record how much we actually ended up sending. 2018-03-26 05:01:49 +00:00
practicalswift
7e9750ffee Reduce variable scopes 2018-03-26 01:31:21 +00:00
practicalswift
94ca824cf5 Use correct format strings for signed integers 2018-03-26 01:20:22 +00:00
ZmnSCPxj
74f3662a3b lightningd/subd.h: Add missing wire/wire.h.
If not included, a source file containing only
`#include<lightningd/subd.h>` will file compilation.
2018-03-26 01:09:59 +00:00
ZmnSCPxj
0bb9bcc0f1 wallet: Track some channel usage statistics.
Fixes: #1049
2018-03-26 01:08:52 +00:00
conanoc
e7c8b95be3 Fix include order 2018-03-26 00:30:39 +00:00
conanoc
c4700a13a7 Add guard for BACKTRACE_SUPPORTED 2018-03-26 00:30:39 +00:00
Rusty Russell
9f7d4312ff bolt11: undo json encoding for description bytes.
We don't handle \u, since we assume everyone sane is using UTF-8.  We'd
still have to reject '\u0000' and maybe other weird cases if we did.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2018-03-26 00:20:53 +00:00
Rusty Russell
54431d2b08 lightningd: escape our own alias when we print it in logs.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2018-03-26 00:20:53 +00:00
Rusty Russell
4139f06780 json_getnodes: escape the alias when we print it out.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2018-03-26 00:20:53 +00:00
Rusty Russell
76e8a11380 wallet: use json_escaped for invoice label.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2018-03-26 00:20:53 +00:00
Rusty Russell
d92579f627 common/json_escaped: new type which explicitly notes a string is already JSON.
Trivial to use as a string, but it still means you should be careful
around it.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2018-03-26 00:20:53 +00:00
Christian Decker
0a5ea76d77 gossip: Add message types to store gossip msgs and associate data
Since we may want to extend the on-disk format by adding custom information we
may as well just go the extra mile and reuse the serialization primitives we
already have.

Signed-off-by: Christian Decker <decker.christian@gmail.com>
2018-03-25 23:56:59 +00:00
practicalswift
a4059ef83e Use expected LIGHTNING_DIR_FILE_H define 2018-03-25 23:54:21 +00:00
practicalswift
98f49c0837 Remove include in file foo.c that is already included in foo.h 2018-03-25 23:54:21 +00:00
Igor Cota
8c00e4f98d Add --bitcoin-rpcport option to pass to bitcoin-rpc 2018-03-25 23:17:36 +02:00
practicalswift
0bf1b01425 Fix typos 2018-03-25 15:53:01 +02:00
Mark Beckwith
489d8d04a6 Fund all (#1249)
* Funding channel with "all"
* Added test for fund all
2018-03-21 00:06:04 +01:00