Unfortunately the invoice_payment_hook can give us a failcode, so I simply
restrict it to the two sensible ones.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-deprecated: plugins: invoice_payment_hook "failure_code" only handles simple cases now, use "failure_message".
Now that we have json_stream in common/, we can move all the related
helpers from lightningd/json to common/json. This way everyone can
benefit of them (including libplugin, the plugins themselves,
potentially lightning-cli), not lightningd alone!
Note that the Makefile of the common/test/ had to be modified, because
the new helpers make use of common/wireaddr... Which turns out to
\#include <lightingd/lightningd.h> ! So we couldnt just include the .c
and add mocks if we redefined some structs (hello run-param).
Changelog-Added: lightningd: Added --subdaemon command to allow alternate subdaemons.
[ Wow, that was mammoth; 44 comments over 12 commits. Feels almost unfair to squash it into one commit, so I wanted to note @ksedgwic's perseverence here! --RR ]
Before this patch we used `int` for error codes. The problem with
`int` is that we try to pass it to/from wire and the size of `int` is
not defined by the standard. So a sender with 4-byte `int` would write
4 bytes to the wire and a receiver with 2-byte `int` (for example) would
read just 2 bytes from the wire.
To resolve this:
* Introduce an error code type with a known size:
`typedef s32 errcode_t`.
* Change all error code macros to constants of type `errcode_t`.
Constants also play better with gdb - it would visualize the name of
the constant instead of the numeric value.
* Change all functions that take error codes to take the new type
`errcode_t` instead of `int`.
* Introduce towire / fromwire functions to send / receive the newly added
type `errcode_t` and use it instead of `towire_int()`.
In addition:
* Remove the now unneeded `towire_int()`.
* Replace a hardcoded error code `-2` with a new constant
`INVOICE_EXPIRED_DURING_WAIT` (903).
Changelog-Changed: The waitinvoice command would now return error code 903 to designate that the invoice expired during wait, instead of the previous -2
This command injects a custom message into the encrypted transport stream to
the peer, allowing users to build custom protocols on top of c-lightning
without requiring any changes to c-lightning itself.
This is needed to fully implement handling of blockheight disagreements
between us and payee.
If payee believes the blockheight is higher than ours, then `pay`
should wait for our node to achieve that blockheight.
Changelog-Add: Implement `waitblockheight` to wait for a specific blockheight.
This lets us do more flexible filtering in the next patch. But it also
keeps some weird logic out of gossipd.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is the final step: we pass the complete fee_states to and from
channeld.
Changelog-Fixed: "Bad commitment signature" closing channels when we sent back-to-back update_fee messages across multiple reconnects.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The invoice_try_pay code now takes a set, rather than a single htlc, but
it's basically the same thing.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a transient field, so rework things so we don't leave it in
struct htlc_out. Instead, load htlc_in first and connect htlc_out to
them as we go.
This also changes one place where we use it instead of the am_origin
flag.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We don't set the secret to compulsory (yet!) but put code in for the
future. Meanwhile, if there is a secret, check it is correct.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In a future version, we will use features to insist that payers
provide the secret. In transition, we may have old invoices which
didn't insist on that, so we need to know this on a per-invoice basis.
Not sure if I got the right syntax for adding an empty blob though!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
lightning-cli is going to need to know what network we're on, so
it will need to parse the config files. Move the code which does
the initial bootstrap parsing into common, as well as the config
file parsing core.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The tal overhead of 5 pointers, the linked list node is 2; and we also
tal'd the string. That's 96 bytes per entry.
Use a simple array instead, though it means more work on deletion
since each log_entry is no longer a tal object.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This simplifies our tests, too, since we don't need a magic option to
enable io logging in subdaemons.
Note that test_bad_onion still takes too long, due to a separate minor
bug, so that's marked and left dev-only for now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This allows finegrained logging control of particular subdaemons or
subsystems.
To do this, we defer setting the logging levels for each log object
until after early argument parsing (since e.g. "bitcoind" log object
is created early).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-changed: Options: log-level can now specify different levels for different subsystems.
1. Printed form is always "[<nodeid>-]<prefix>: <string>"
2. "jcon fd %i" becomes "jsonrpc #%i".
3. "jsonrpc" log is only used once, and is removed.
4. "database" log prefix is use for db accesses.
5. "lightningd(%i)" becomes simply "lightningd" without the pid.
6. The "lightningd_" prefix is stripped from subd log prefixes, and pid removed.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-changed: Logging: formatting made uniform: [NODEID-]SUBSYSTEM: MESSAGE
Changelog-removed: `lightning_` prefixes removed from subdaemon names, including in listpeers `owner` field.
We had a separate logbook for each peer, and copy log entries above
the printable log level into the master logbook. This didn't always
work well, since we didn't dump it on crash for example.
Keep a single global logbook instead, and remove this infrastructure.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
A log can have a default node_id, which can be overridden on a per-entry
basis. This changes the format of logging, so some tests need rework.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The 'rpc_command' hook allows a plugin to take over any RPC command.
It sends the complete JSONRPC request to the plugin, which can then respond
with :
- {'continue'}: executes the command normally
- {'replace': {a_jsonrpc_request}}: replaces the request made
- {'return': {'result': {}}}: send a custom response
- {'return': {'error': {}}}: send a custom error
This way, a plugin can modify (/reimplement) or restrict the usage of
any of `lightningd`'s commands.
Changelog-Added: Plugin: A new plugin hook, `rpc_command` allows a plugin to take over `lightningd` for any RPC command.
I had a report of a 0.7.2 user whose node hadn't appeared on 1ml. Their
node_announcement wasn't visible to my node, either.
I suspect this is a consequence of recent version reducing the amount of
gossip they send, as well as large nodes increasingly turning off gossip
altogether from some peers (as we do). We should ignore timestamp filters
for our own channels: the easiest way to do this is to push them out
directly from gossipd (other messages are sent via the store).
We change channeld to wrap the local channel_announcements: previously
we just handed it to gossipd as for any other gossip message we received
from our peer. Now gossipd knows to push it out, as it's local.
This interferes with the logic in tests/test_misc.py::test_htlc_send_timeout
which expects the node_announcement message last, so we generalize
that too.
[ Thanks to @trueptolmy for bugfix! ]
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is mainly an internal-only change, especially since we don't
offer any globalfeatures.
However, LND (as of next release) will offer global features, and also
expect option_static_remotekey to be a *global* feature. So we send
our (merged) feature bitset as both global and local in init, and fold
those bitsets together when we get an init msg.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I thought LND had a bug, but turns out it doesn't like out-of-order
short_channel_ids: in fact, the spec says they have to be in order!
This means we use uintmap instead of a htable for unknown_scids and
stale_scids so they're nicely ordered.
But our nodes-missing-announcements probe is harder since they can
also contain duplicates: we switch that to iterate through channels
rather than nodes.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This patch adds a channel_id parameter to allow for specifying
channels that are lacking a short_channel_id.
Useful in the case where a peer has 1) multiple channels (ONCHAIN etc)
and 2) a channel where the funding transaction hasn't been
broadcast/mined.
Command format: close id [unilateraltimeout] [destination]
Close the channel with peer {id}, forcing a unilateral
close after {unilateraltimeout} seconds if non-zero, and
the to-local output will be sent to {destination}. If
{destination} isn't specified, the default is the address
of lightningd.
Also change the pylightning:
update the `close` API to support `destination` parameter
This will let gossipd be more intelligent about gossiping before we're
synced, and also it might know how far behind we are.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We now have a much stronger consistency check from the combination of
transaction wrapping, tal memory leak detection. Tramsaction wrapping ensures
that each statement is executed before the transaction is committed. The
commit is also driven by the `io_loop`, which means that it is no longer
possible for us to have statements outside of transactions and transactions
are guaranteed to commit at the round's end.
By adding the tal-awareness we can also get a much better indication as to
whether we have un-freed statements flying around, which we can test at the
end of the round as well.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We will soon generalize the DB, so directly reaching into the `struct db`
instance to talk to the sqlite3 connection is bad anyway. This increases
flexibility and allows us to tailor the actual implementation to the
underlying DB.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Dumb programs which have a --daemon option call fork() early. This is
terrible UX since startup errors get lost: the program exits with
"success" immediately then you discover via the logs that it didn't
start at all.
However, forking late introduced a heap of problems with changing
pids. Instead, fork early but keep stderr and the parent around: if
we fail early on, the parent fails with us. We release our parent
with an explicit action just before the main loop.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
