Removes the `COMPAT_V070` functionality for `listfowards`.
Changelog-Changed: The `listforwards` command will now return a value
of 0 for `received_time` for very old forward attempts.
Changelog-Added: JSON-RPC: `decode` now used modern BOLT 4 language for blinded paths, `first_path_key`.
Changelog-Deprecated: JSON-RPC: `decode` `blinding` in blinded path: use `first_path_key`.
Changelog-Added: Plugins: `onion_message_recv` and `onion_message_recv_secret` hooks now used modern BOLT 4 language for blinded paths, `first_path_key`.
Changelog-Deprecated: JSON-RPC: `onion_message_recv` and `onion_message_recv_secret` hooks `blinding` in blinded path: use `first_path_key`.
No code changes, just catching up with the BOLT changes which rework our
blinded path terminology (for the better!).
Another patch will sweep the rest of our internal names, this tries only to
make things compile and fix up the BOLT quotes.
1. Inside payload: current_blinding_point -> current_path_key
2. Inside update_add_htlc TLV: blinding_point -> blinded_path
3. Inside blinded_path: blinding -> first_path_key
4. Inside onion_message: blinding -> path_key.
5. Inside encrypted_data_tlv: next_blinding_override -> next_path_key_override
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This means we should support it by default.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: `option_quiesce` enabled by default.
Changelog-Deprecated: Config: --experimental-quiesce: it's now the default.
I noticed that increasing mu a little bit sometimes made a big difference,
because by completely ignoring fees we were choosing the worst of two channels
in some cases.
Start at 1% fees; this saves a lot on initial fees in this test!
Here's the new stats on mu levels:
96 mu=1
90 mu=10
41 mu=20
30 mu=30
24 mu=40
19 mu=50
22 mu=60
8 mu=70
95 mu=80
19 mu=90
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: `askrene` is now better at finding low-fee paths.
While the `k=8` value worked for the current main network tests with the
amounts in those tests, it wasn't robust across a wider range of values
(as demonstrated when other test changes broke tests!).
Time to do this properly: calculate the ratio at the time we combine them,
using median values.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I noticed this in the logs:
plugin-cln-askrene: notify msg unusual: The flows had a fee of 151950msat, greater than max of 53697msat, retrying with mu of 10%...
plugin-cln-askrene: notify msg unusual: The flows had a fee of 220126msat, greater than max of 53697msat, retrying with mu of 20%...
We would expect increasing mu to *reduce* the fee!
Turns out that our linear fee is a bad terrible approximation, because I
was using base_fee_penalty of 10.0.
|
| / __ <- real fee, with base: fee = base + propfee * amount.
| / __/
| _//
| __/
| __/_/
|/ _/
| _/ <- linearized fee: fee = linear * amount
|/
+-----------------------------------
These cross over where linear = propfee + base / amount. Assume we split the
payment into 10 parts, this implies that the base_fee_penalty should be 10 / amount
(this gives a slight penalty to the normal case, but that's ok).
This gives better results, too: we get down to 650099 sats in fees, vs 801613
before.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
During "test_real_data", then only successes with reduced fees were 92 on "mu=10", and only
1 on "mu=30": the rest went to mu=100 and failed.
I tried numerous approaches, and in the end, opted for the simplest:
The typical range of probability costs looks likes:
min = 0, max = 924196240, mean = 10509.4, stddev = 1.9e+06
The typical range of linear fee costs looks like:
min = 0, max = 101000000, mean = 81894.6, stddev = 2.6e+06
This implies a k factor of 8 makes the two comparable.
This makes the two numbers comparable, and thus makes "mu" much more
effective. Here are the number of different mu values we succeeded at:
87 mu=0
90 mu=10
42 mu=20
24 mu=30
17 mu=40
19 mu=50
19 mu=60
11 mu=70
95 mu=80
19 mu=90
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We ask it again, but reduce fees by 1msat from the previous answer.
This is really nasty, as it frequently exercises the case where we
only go over fee when we do the refinement step.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The fp16_t values are approximations (overestimate for htlc_max,
underestimate for htlc_min), so in the refinement step we should use
the exact values.
This also fixes a logic bug: flow_remaining_capacity returned the
total capacity, not the additional capacity!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: `askrene` now honors exact htlc_maximum_msat limits.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: `getroutes` now applies `auto.sourcefree` layer in the order specified, so doesn't alter channels changed in later layers.
It was failing because the channel_hint from one attempt would prevent
us from retrying. By changing the amounts so that the channel_hints do
not concern them (value smaller than estimate) we can make things work
as before again.
A failing payment would doom all subsequent ones. Now we step down the
amount a single satoshi so any prior channel_hints do not doom the
payment outright.
Changelog-None
1. describe_disabled should point out if node itself is disabled.
2. Hoist constraint check for neater if branching.
3. Use amount_msat_max/min for greater clarity.
4. Simply disable channels, don't zero htlc_min/max when node disabled.
I also fixed the diagnostic of htlc_max correctly, which removes a FIXME.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This turns out to be critical for users: also stops them from
bothering us when their node is offline or has insufficient capacity!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This allows for explicit partial updates to channels (e.g. just change
fees, or just disable) without haveing to set the other fields.
This generalizes askrene-disable-channel, which is removed.
We also take the chance to use the proper BOLT 7 terms in the API:
- htlc_minimum_msat
- htlc_maximum_msat
- cltv_expiry_delta
- fee_base_msat
- fee_proportional_millionths
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Lagrang3 points out that if we hit a maximum, we should take into account
the reserve. This is true, but it's hard for the caller to do, so change
the API to be slightly higher level.
Tell "inform" what happened, and it adjust the constraints appropriately.
This makes the least assumptions possible (a reserve does *not* mean that
the capacity was actually used at that time).
We also add a mode to say "this succeeded": for now this does nothing,
but it could reduce both min/max capacities, and add capacity in the
other direction. This is useful for future payments, but not as useful
for the current one.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's generally better to be explicit with these things: currently typos
would be ignored. But it's also much easier to clean up entire layers
as we use them for temporary (per-payment) effects.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This allows tools to validate that it is accessing the correct hsm_secret for this node!
This is extremely important for backups: if they are using VLS, they need to back *that*
up instead, for example.
Changelog-Added: `hsmtool`: `getnodeid` command derives the node id from the hsm_secret, to verify it's the correct secret.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
"spendable" is for a single HTLC: if we own the channel, this amount
decreases with every HTLC, as we have to pay fees. We have access to this since
we call listpeerchannels anyway, so we can calculate the additional costs and
use it in the refining phase.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is the root cause of the problem worked around in 50949b7b9c
"askrene: hack in some padding so we don't overflow capacities."
When adding fees to flows, we didn't recheck the boundary conditions: in
renepay this is done by routebuilder.
Fortunately, we can use our "reservations" infrastructure to temporarily
use capacity as we process flows, so we handle the cases where they are
not independent correclty.
My assumption is that the resulting errors are small, so we divide
them between the remaining flows based on highest-to-least
probability.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We had a workaround for channels added by "auto.local", but instead we
should make it work properly.
I didn't do this before because we can't manipulate the localmods while
they're applied, but it's simple to do it in two stages.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Not quite the same, as it doesn't have the "auto.local" layer, but it exhibits
the same problem if we revert the fix for test_live_spendable.
And it's much faster!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
- Removes CI value error for Broken logs
- Fixes CI errors due to deprecated listconfigs 'important-plugins'
- Removed listchannels deprecated local test
Changelog-None.
Thanks to Michael Schmook for the excellent bug report.
Fixes: https://github.com/ElementsProject/lightning/issues/7671
Changelog-Fixed: lightningd: no longer crash if a plugin dies during lightningd startup.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's an output field (which we don't complain about), not an input field!
Fixes: https://github.com/ElementsProject/lightning/issues/7652
Changelog-Fixed: Logging: removed bogus "**BROKEN** plugin-topology: DEPRECATED API USED: listchannels.include_private" message.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
