This is needed when we know we're *opening* an anchor channel, to
override the "do we already have an anchor channel open?" logic.
Also, document the nonwrapped arg added in v23.02.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `fundpsbt` and `utxopsbt` new parameter `opening_anchor_channel` so lightningd knowns it needs emergency reserve for anchors.
This is the simple version which always tries to keep some sats if we
have an anchor channel. Turns out that we need something more
sophisticated for multifundchannel, so that's next.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `withdraw` will refuse to spend funds below `min-emergency-msat` if we have any anchor channels (and `all` will be reduced appropriately).
Changelog-Changed: JSON-RPC: `fundpsbt` and `utxopsbt` will refuse to spend funds below `min-emergency-msat` if we have any anchor channels.
If you did call fundpsbt with amount 'all' and `excess_as_change`
true, you would get everything going to the change output. That's
obviously not the intention, and we'd like to use this to add change
outputs even for "all" when have keep emergency reserves.
And change the finish_psbt() API to take an explicit change amount:
at the moment it's either all or nothing, but that will change with
emergency-sat reserves.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In most cases, it's the same as option_anchor_outputs, but for
fees it's different. This transformation is the simplest:
pass it as a pair, and test it explicitly.
In future we could rationalize some paths, but this was nice
and mechanical.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We were setting the wrong input number: don't assume it's the
same as the UTXO number, but simply the last-appended input.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Libwally update breaks compatibility, so
we do this in one large step.
Changelog-Changed: JSON-RPC: elements network PSET now only supports PSETv2.
Changelog-Added: JSON-RPC: PSBTv2 supported for fundchannel_complete, openchannel_update, reserveinputs, sendpsbt, signpsbt, withdraw and unreserveinputs parameter psbt, openchannel_init and openchannel_bump parameter initialpsbt, openchannel_signed parameter signed_psbt and utxopsbt parameter utxopsbt
At the moment only lightingd needs it, and this avoids missing any
places where we do bip32 derivation.
This uses a hsm capability to mean we're backwards compatible with older
hsmds.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: we now always double-check bitcoin addresses are correct (no memory errors!) before issuing them.
It's needed as the db and wallet is being set up (db migrations), so
it's simpler this way to always use ld->bip32_base for the next patch.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We need to be able to only use non-wrapped inputs for v2/interactive tx
protocol.
Changelog-Added: JSONRPC: `fundpsbt` option `nonwrapped` filters out p2sh wrapped inputs
Changelog-Removed: JSON-RPC: `fundpsbt`/`utxopsbt` `reserve` must be a number, not bool (deprecated v0.11.0)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There are hardly any lightningd-specific JSON functions: all that's left
are the feerate ones, and there's already a comment that we should have
a lightningd/feerate.h.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We have them split over common/param.c, common/json.c,
common/json_helpers.c, common/json_tok.c and common/json_stream.c.
Change that to:
* common/json_parse (all the json_to_xxx routines)
* common/json_parse_simple (simplest the json parsing routines, for cli too)
* common/json_stream (all the json_add_xxx routines)
* common/json_param (all the param and param_xxx routines)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We had json_add_amount_msat_only(), which was designed to be used to
print out msat fields, if we had sats.
However, we misused it, so split it into the three different cases:
1. json_add_amount_sat_msat: We are using it correctly, with a field called
xxx_msat.
2. json_add_amount_sats_deprecated: We were using it wrong, so deprecate
the old field and create a new one which does end in _msat.
3. json_add_sats: we were using it to hand sats as a JSON parameter to an
interface, where "XXXsat".
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: Plugins: `rbf_channel` and `openchannel2` hooks `their_funding` (use `their_funding_msat`)
Changelog-Deprecated: Plugins: `openchannel2` hook `dust_limit_satoshis` (use `dust_limit_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `funding_satoshis` (use `funding_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `dust_limit_satoshis` (use `dust_limit_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `channel_reserve_satoshis` (use `channel_reserve_msat`)
Changelog-Deprecated: Plugins: `channel_opened` notification `amount` (use `funding_msat`)
Changelog-Deprecated: JSON-RPC: `listtransactions` `msat` (use `amount_msat`)
Changelog-Deprecated: Plugins: `htlc_accepted` `forward_amount` (use `forward_msat`)
Make it always a number; this makes the JSON request specification
simpler. We allowed a number since v0.10.1.
(reserve=True is the default anyway, so usually it can be omitted:
reserve=False becomes reserve=0).
Changelog-Deprecated: JSON-RPC: `fundpsbt`/`utxopsbt` `reserve` must be a number, not bool (for `true` use 72/don't specify, for `false` use 0). Numbers have been allowed since v0.10.1.
And turn "" includes into full-path (which makes it easier to put
config.h first, and finds some cases check-includes.sh missed
previously).
config.h sets _GNU_SOURCE which really needs to be done before any
'#includes': we mainly got away with it with glibc, but other platforms
like Alpine may have stricter requirements.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Before:
Ten builds, laptop -j5, no ccache:
```
real 0m36.686000-38.956000(38.608+/-0.65)s
user 2m32.864000-42.253000(40.7545+/-2.7)s
sys 0m16.618000-18.316000(17.8531+/-0.48)s
```
Ten builds, laptop -j5, ccache (warm):
```
real 0m8.212000-8.577000(8.39989+/-0.13)s
user 0m12.731000-13.212000(12.9751+/-0.17)s
sys 0m3.697000-3.902000(3.83722+/-0.064)s
```
After:
Ten builds, laptop -j5, no ccache: 8% faster
```
real 0m33.802000-35.773000(35.468+/-0.54)s
user 2m19.073000-27.754000(26.2542+/-2.3)s
sys 0m15.784000-17.173000(16.7165+/-0.37)s
```
Ten builds, laptop -j5, ccache (warm): 1% faster
```
real 0m8.200000-8.485000(8.30138+/-0.097)s
user 0m12.485000-13.100000(12.7344+/-0.19)s
sys 0m3.702000-3.889000(3.78787+/-0.056)s
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We were getting off-by-one for the total amount that the change is for,
since it rounds the fee *down*, independent of the total weight of the
entire tx.
We fix this by using the diff btw the fee of the total weight (w/ and
w/o the change output)
Not an API break: reserve=true|false still works for fundpsbt and utxopsbt,
but we also allow a raw number in there.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
if the utxo can't pay for its own fees, dont put it in the tx
Changelog-Changed: JSONRPC: fundpsbt will not include UTXOs that aren't economic (can't pay for their own fees), unless 'all'
In the case where you want a PSBT and also want the output to be added
as a change address, use `excess_as_change` = true.
Generates a change address to use. If you want to pay the excess
elsewhere, you will have to add separately.
Changelog-Added: JSON-RPC: Add new parameter `excess_as_change` to fundpsbt+utxopsbt
Needed for v2 of channel opens, where the minimum weight is 110; a
'simple utxo' (sig + key) weighs in at 107, so we a need a way to
establish a floor for this case.
Changelog-Added: JSON-RPC: fundpsbt/utxopsbt have new param, `min_witness_utxo`, which sets a floor for the weight calculation of an added input
We need this for dual funding, since the interactive tx construction
protocol requires the full tx to send places. We add it to all PSBTs (if
we have it), here
We force use of tal_wally_start/tal_wally_end around every wally
allocation, and with "end" make the caller choose where to reparent
everything.
This is particularly powerful where we allocate a tx or a psbt: we
want that tx or psbt to be the parent of the other allocations, so
this way we can reparent the tx or psbt, then reparent everything
else onto it.
Implementing psbt_finalize (which uses a behavior flag antipattern)
was tricky, so I ended up splitting that into 'psbt_finalize' and
'psbt_final_tx', which I think also makes the callers clearer.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
dual funding needs the max-witness-len and utxo fields set for every
input. we should add them when we create a 'fundpsbt', so that every
psbt that c-lightning generates is dual-funding ready
fundpsbt / utxopsbt create a (typically) output-less PSBT,
however for elements we require the fees to be encapsulated in an
output.
this patch updates fundpsbt / utxopsbt to add a fee output for elements
transactions. includes test updates.
Fixes#3998
This removes the reservation cleanup at startup, too, now they're all
using 'reserved_til'.
This changes test_withdraw, since it asserted that outputs were marked
spent as soon as we broadcast a transaction: now they're reserved until
it's mined. Similarly, test_addfunds_from_block assumed we'd see funds
as soon as we broadcast the tx.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `withdraw` now randomizes input and output order, not BIP69.
If all is set, diff may not be:
==1230518== Use of uninitialised value of size 8
==1230518== at 0x4C5781B: _itoa_word (_itoa.c:179)
==1230518== by 0x4C736F4: __vfprintf_internal (vfprintf-internal.c:1687)
==1230518== by 0x4C88119: __vsnprintf_internal (vsnprintf.c:114)
==1230518== by 0x1D44B6: do_vfmt (str.c:66)
==1230518== by 0x1D45A0: tal_vfmt_ (str.c:92)
==1230518== by 0x1D4401: tal_fmt_ (str.c:44)
==1230518== by 0x15D30F: fmt_amount_sat (amount.c:60)
==1230518== by 0x15D338: fmt_amount_sat_ (amount.c:62)
==1230518== by 0x178C45: type_to_string_ (type_to_string.c:35)
==1230518== by 0x1B8F75: json_fundpsbt (reservation.c:394)
==1230518== by 0x12D0EC: command_exec (jsonrpc.c:602)
==1230518== by 0x12D598: rpc_command_hook_callback (jsonrpc.c:712)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Required for dual funding where the opener sets it.
Changelog-Added: JSON-RPC: `fundpsbt` takes a new `locktime` parameter
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This more closely mirrors fundpsbt (which will only select unreserved ones)
but you can turn it off if you want to e.g. rbf in future.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: New low-level command `utxopsbt` to create PSBT from existing utxos.
