Shahana decided this was the optimal UX path, though I insisted that we still
report the actual problem directly when in dev mode, as a compromise.
Suggested-by: https://github.com/Amperstrand
Changelog-Changed: JSON-RPC: Do not return the contents of invalid parameters in error messages, refer to logs (use 'check' to get full error messages)
Fixes: https://github.com/ElementsProject/lightning/issues/7338
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We don't actually support it yet, but this threads through the type change,
puts it in "decode" etc.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We want to extend it to plugins, and we want it to be allowed to be async for more power,
so rather than not completing the cmd if we're checking, do it in command_check_done()
and call it.
This is cleaner than the special case we had before, and allows check to us all the
normal jsonrpc mechanisms, especially async requests (which we'll need if we want to
hand check requests to plugins!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And do them on the first run (where we check parameters), instead
of every time. Might as well do them in non-developer mode too,
since they're simply programmer correctness.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
`struct log` becomes `struct logger`, and the member which points to the
`struct log_book` becomes `->log_book` not `->lr`.
Also, we don't need to keep the log_book in struct plugin, since it has
access to ld's log_book.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Previously, our code checked for the presence of the `lightning:`
prefix while decoding a bolt11 string. Although this prefix is valid
and accepted by the core lightning pay command, it was causing issues
with how we managed invoices. Specifically, we were skipping the prefix
when creating a copy of the invoice string and storing the raw invoice
(including the prefix) in the database, which caused inconsistencies
in the user experience.
To address this issue, we need to strip the `lightning:` prefix before
calling each core lightning command. In addition, we should
modify the invstring inside the db with the canonical one.
This commit fixes the issue by stripping the `lightning:` prefix
from the `listsendpays` function, which will improve the
user experience and ensure consistency in our invoice management (see
next commit).
Reported-by: @johngribbin
Link: ElementsProject#6207
Fixes: debbdc0
Changelog-Fixes: trim the `lightning:` prefix from invoice everywhere.
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
We usually have access to `ld`, so avoid the global.
The only place generic code needs it is for the json command struct,
and that already has accessors: add one for libplugin and lightningd
to tell it if deprecated apis are OK.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This allows GDB to print values, but also allows us to use them in
'case' statements. This wasn't allowed before because they're not
constant terms.
This also made it clear there's a clash between two error codes,
so move one.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: Error code from bcli plugin changed from 400 to 500.
We have them split over common/param.c, common/json.c,
common/json_helpers.c, common/json_tok.c and common/json_stream.c.
Change that to:
* common/json_parse (all the json_to_xxx routines)
* common/json_parse_simple (simplest the json parsing routines, for cli too)
* common/json_stream (all the json_add_xxx routines)
* common/json_param (all the param and param_xxx routines)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Callers were supposed to call "tlv_fields_valid" after fromwire_tlv,
but few did. Make this the default, and call the underlying function
directly where we want to be more flexible (one place).
This loses the ability to allow misordered fields, or to pass through
*any* even fields. We restore that for special cases in the next
patch.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Before:
Ten builds, laptop -j5, no ccache:
```
real 0m36.686000-38.956000(38.608+/-0.65)s
user 2m32.864000-42.253000(40.7545+/-2.7)s
sys 0m16.618000-18.316000(17.8531+/-0.48)s
```
Ten builds, laptop -j5, ccache (warm):
```
real 0m8.212000-8.577000(8.39989+/-0.13)s
user 0m12.731000-13.212000(12.9751+/-0.17)s
sys 0m3.697000-3.902000(3.83722+/-0.064)s
```
After:
Ten builds, laptop -j5, no ccache: 8% faster
```
real 0m33.802000-35.773000(35.468+/-0.54)s
user 2m19.073000-27.754000(26.2542+/-2.3)s
sys 0m15.784000-17.173000(16.7165+/-0.37)s
```
Ten builds, laptop -j5, ccache (warm): 1% faster
```
real 0m8.200000-8.485000(8.30138+/-0.097)s
user 0m12.485000-13.100000(12.7344+/-0.19)s
sys 0m3.702000-3.889000(3.78787+/-0.056)s
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We make it a first-class citizen internally, even though we won't use
it over the wire (at least, non-experimental builds). This scheme
follows the latest draft, in which features are flagged compulsory.
We also add several helper functions.
Since uses the *even* bits (as per latest spec), not the *odd* bits,
we have some other fixups.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In a couple of places we accept arrays of strings and don't validate
them. If we forward them, e.g., call a JSON-RPC method from the
plugin, we end up embedding the unverified string in the JSON-RPC
call without escaping, which then leads to invalid JSON being passed
on.
This at least partially causes #4238
Avoids much cut & paste. Some tests don't need any of it, but most
want at least some of this infrastructure.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Before this patch we used to send `double`s over the wire by just
copying them. This is not portable because the internal represenation
of a `double` is implementation specific.
Instead of this, multiply any floating-point numbers that come from
the outside (e.g. JSONs) by 1 million and round them to integers when
handling them.
* Introduce a new param_millionths() that expects a floating-point
number and returns it multipled by 1000000 as an integer.
* Replace param_double() and param_percent() with param_millionths()
* Previously the riskfactor would be allowed to be negative, which must
have been unintentional. This patch changes that to require a
non-negative number.
Changelog-None
Now that we have json_stream in common/, we can move all the related
helpers from lightningd/json to common/json. This way everyone can
benefit of them (including libplugin, the plugins themselves,
potentially lightning-cli), not lightningd alone!
Note that the Makefile of the common/test/ had to be modified, because
the new helpers make use of common/wireaddr... Which turns out to
\#include <lightingd/lightningd.h> ! So we couldnt just include the .c
and add mocks if we redefined some structs (hello run-param).
Before this patch we used `int` for error codes. The problem with
`int` is that we try to pass it to/from wire and the size of `int` is
not defined by the standard. So a sender with 4-byte `int` would write
4 bytes to the wire and a receiver with 2-byte `int` (for example) would
read just 2 bytes from the wire.
To resolve this:
* Introduce an error code type with a known size:
`typedef s32 errcode_t`.
* Change all error code macros to constants of type `errcode_t`.
Constants also play better with gdb - it would visualize the name of
the constant instead of the numeric value.
* Change all functions that take error codes to take the new type
`errcode_t` instead of `int`.
* Introduce towire / fromwire functions to send / receive the newly added
type `errcode_t` and use it instead of `towire_int()`.
In addition:
* Remove the now unneeded `towire_int()`.
* Replace a hardcoded error code `-2` with a new constant
`INVOICE_EXPIRED_DURING_WAIT` (903).
Changelog-Changed: The waitinvoice command would now return error code 903 to designate that the invoice expired during wait, instead of the previous -2
This patch adds a channel_id parameter to allow for specifying
channels that are lacking a short_channel_id.
Useful in the case where a peer has 1) multiple channels (ONCHAIN etc)
and 2) a channel where the funding transaction hasn't been
broadcast/mined.
These are generalized from our internal implementations.
The main difference is that 'struct json_escaped' is now 'struct
json_escape', so we replace that immediately.
The difference between lightningd's json-writing ringbuffer and the
more generic ccan/json_out is that the latter has a better API and
handles escaping transparently if something slips through (though
it does offer direct accessors so you can mess things up yourself!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The current param_sat accepts "any": rename and move that to invoice.c
where it's called. We rename it to param_msat_or_any and invoice.c
is our first (trivial) amount_msat user.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Wasn't using valid JSON, but worked anyway. This is actually OK
because we don't rely on tok->size, but we want to, so another fix
coming.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Handers of a specific form are both designed to be used as callbacks
for param(), and also dispose of the command if something goes wrong.
Make them return the 'struct command_result *' from command_failed(),
or NULL.
Renaming them just makes sense: json_tok_XXX is used for non-command-freeing
parsers too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
These routines free the 'struct command': a common coding error is not
to return immediately.
To catch this, we make them return a non-NULL 'struct command_result
*', and we're going to make the command handlers return the same (to
encourage 'return command_fail(...)'-style usage).
We also provide two sources for external use:
1. command_param_failed() when param() fails.
2. command_its_complicated() for some complex cases.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
json_escaped.[ch], param.[ch] and jsonrpc_errors.h move from lightningd/
to common/. Tests moved too.
We add a new 'common/json_tok.[ch]' for the common parameter parsing
routines which a plugin might want, taking them out of
lightningd/json.c (which now only contains the lightningd-specific
ones).
The rest is mainly fixing up includes.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2018-12-10 00:00:50 +00:00
Renamed from lightningd/test/run-param.c (Browse further)
