This also means we subtract 660 satoshis more everywhere we subtract
the base fee (except for mutual close, where the base fee is still
used).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is best done by passing `struct bitcoin_signature` around instead
of raw signatures. We still save raw sigs to the db, and of course the
wire protocol uses them.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
HTLC fees increase (larger weight), and the fee paid by the opener
has to include the anchor outputs (i.e. 660 sats).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is what txsend does, only we have a psbt so we have
to change the db interface to take a wally_tx.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Suggested-by: Rusty Russell <@rustyrussell>
Changelog-Deprecated: JSON-RPC: `listsendpays` will no longer add `null` if we don't know the `amount_msat` for a payment.
This lets us handle it the same way we handle builtin commands, and also
lets us warn if they use deprecated apis and allow-deprecated-apis=false.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Plugins: can now mark their options and commands deprecated.
This allows plugins to choose how to present things in getmanifest.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: plugins: `getmanifest` may now include "allow-deprecated-apis" boolean flag.
Changelog-Deprecated: plugins: `getmanifest` without any parameters; plugins should accept any parameters for future use.
If allow-deprecated-apis=false, don't mention them at all (we already
disallow calling them in that case). Otherwise, note that they're
deprecated in the help msg.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's not all that rare to do these operations, and requiring annotations
for it is a little painful.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: New option `--important-plugin` loads a plugin is so important that if it dies, `lightningd` will exit rather than continue. You can still `--disable-plugin` it, however, which trumps `--important-plugin` and it will not be started at all.
We were basing the 2016 block timeout on the blockchain height that we had
processed at the time completed the funding, which could lag considerably
behind the network-wide blockheight. For example this could happen if we
started with `--rescan` from a low height, taking some time to catch up.
This means that we could end up forgetting channels even before reaching the
network blockheight. This patch instead uses the headercount reported by the
backend plugin if we aren't caught up yet. While the chances of this happening
are still there, the window it might happen are much reduced, since headers
can be synced in a couple of minutes.
Reported-by: Riccardo Masutti
Changelog-Changed: Funding timeout is now based on the header count reported by the bitcoin backend instead of our current blockheight which might be lower.
Changelog-Changed: JSON-RPC: `delinvoice` will now report specific error codes: 905 for failing to find the invoice, 906 for the invoice status not matching the parameter.
we're about to add a migration that requires access to the bip32_key
in order to calculate missing scriptpubkeys.
prior to this patch, we don't have access to the bip32 key in the db
migration, as it's set on the wallet but after the db migrations are
run.
here we patch it through so that every migration can access it
While not directly necessary, it still feeds the `listpays` result, and so we
should pass it along if we can, so we don't have to rely solely on the
`amount_sent` field, which includes the fees.
Reported-by: Rusty Russell <@rustyrussell>
There were no channel updates in my log; because sendonion doesn't know the
actual node_ids or channel_ids, we can't tell gossipd what node/channel it was
so it can no longer remove them on PERM errors.
However, we can tell it the error message so it can apply the update.
Fixes: #3877
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And document the partid arg.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `sendonion` has a new optional `bolt11` argument for when it's used to pay an invoice.
Reduces VALGRIND=1 node_factory.line_graph(5) time on my laptop from 42s to 36s.
This is simply because forking all the subdaemons just to check the
version is very expensive under valgrind.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The test had part 1 and 2 backward, but still worked. When I copied that to
*after* the test had succeeded, it complained. It should always complain,
to catch bugs.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This wasn't important before, but now we have MPP it's good to enforce.
Reported-by: Christian Decker
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
`listconfigs` calls were setting the description twice and was using the
pointer to the boolean value as the boolean value, resulting in always
returning `true`.
This happens to be an edge case with the way we use `sendonion` in
MPP. `sendonion` does not attempt to recover the route even if we supply the
shared secrets (it'd require us to map forwarding channels to the nodes etc),
so `failnode` will always be unset, unless it is the first hop, which gets
stored. This is not a problem if it weren't for the fact that we don't store
the partial route, consisting solely of the channel leading to the first hop,
therefore the assertion that either both are NULL or both aren't fails on the
first hop.
This went unnoticed since with MPP we have more concurrent payments in flight,
increasing the chances of a exhausted first hop considerably.
Technically an API break, but nobody relies on these I hope!
Note that the feerates warning was buried inside the style object:
it should be top-level.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is the only place outside the wallet code where we create
a 'struct utxo', so it makes sense for us to move that logic inside
the wallet.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
These are pulled from wallet/wallet.c, with the fix now that we grind sigs.
This reduces the fees we pay slightly, as you can see in the coinmoves changes.
I now print out all the coin moves in suitable format before we match:
you only see this if the test fails, but it's really helpful.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Our existing coin_moves tracking logic assumed that any tx we had an
input in belonged to *all* of our wallet (not a bad assumption as long
as there was no way to update a tx that spends our wallets)
Now that we've got `signpsbt` implemented, however, we need to be
careful about how we account for withdrawals. For now we do a best guess
at what the feerate is, and lump all of our spent outputs as a
'withdrawal' when it's impossible to disambiguate
Changelog-Changed: `fundchannel_cancel` will now succeed even when executed while a `fundchannel_complete` is ongoing; in that case, it will be considered as cancelling the funding *after* the `fundchannel_complete` succeeds.
Let me introduce the concept of "Sequential Consistency":
All operations on parallel processes form a single total order agreed upon by all processes.
So for example, suppose we have parallel invocations of `fundchannel_complete` and `fundchannel_cancel`:
+--[fundchannel_complete]-->
|
--[fundchannel_start]-+
|
+--[fundchannel_cancel]---->
What "Sequential Consistency" means is that the above parallel operations can be serialized as a single total order as:
--[fundchannel_start]--[fundchannel_complete]--[fundchannel_cancel]-->
Or:
--[fundchannel_start]--[fundchannel_cancel]--[fundchannel_complete]-->
In the first case, `fundchannel_complete` succeeds, and the `fundchannel_cancel` invocation also succeeds, sending an `error` to the peer to make them forget the chanel.
In the second case, `fundchannel_cancel` succeeds, and the succeeding `fundchannel_complete` invocation fails, since the funding is already cancelled and there is nothing to complete.
Note that in both cases, `fundchannel_cancel` **always** succeeds.
Unfortunately, prior to this commit, `fundchannel_cancel` could fail with a `Try fundchannel_cancel again` error if the `fundchannel_complete` is ongoing when the `fundchannel_cancel` is initiated.
This violates Sequential Consistency, as there is no single total order that would have caused `fundchannel_cancel` to fail.
This commit is a minimal patch which just reschedules `fundchannel_cancel` to occur after any `fundchannel_complete` that is ongoing.
We passed below the floor when the user specified `1000perkb`.
Matt Whitlock says :
I was withdrawing with feerate=1000perkb, which should be the minimum-allowed fee rate. Indeed, bitcoin-cli getmempoolinfo reports:
{
"loaded": true,
"size": 15097,
"bytes": 9207924,
"usage": 32831760,
"maxmempool": 64000000,
"mempoolminfee": 0.00001000,
"minrelaytxfee": 0.00001000
}
Changelog-fixed: rpc: The `feerate` parameters now correctly handle the standardness minimum when passed as `perkb`.
Signed-off-by: Antoine Poinsot <darosior@protonmail.com>
Reported-by: Matt Whitlock
We're going to use the hsm for a migration, so we need to set up the HSM
before we get to the wallet migration code.
All that this requires is removing the places in HSM init that we touch
the database struct -- easy enough to accomplish by passing the required
field back out from init, and then associating it onto the wallet after
it's been initialized.
