This matches what the master does: increments commit index when we send
commit_sig. Thus if we restart at that point, we match.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This matters in one case: channeld receiving a bad message is a
permenant failure, whereas losing a connection is transient.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We need the old remote per_commitment_point so we can validate the
per_commitment_secret when we get it.
We unify this housekeeping in the master daemon using
update_per_commit_point().
This patch also saves whether remote funding is locked, and disallows
doing that twice (channeld should ignore it).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's a bit tricky since we want to hand more verbose errors to the local
case, but the locally-created and forwarded paths had diverged (the local
one missing some things).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There are two ways we can do retransmission on reconnect: re-derive
what we would have sent, or remember it and simply re-send. The
rederivation is difficult: unwinding state depends on whether we sent
a revoke_and_ack before or after the commitment_signed, and unwinding
a revoke_and_ack would require us to remember HTLCs we would have
normally forgotten at this point.
So we simply tell the master to remember the old signatures for us,
and hand them back in case we need to re-send.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In the case where we can't decrypt the onion, we can't fail it in the
normal way (which is encrypted using the onion shared secret), we need
to respond with a update_fail_malformed_htlc message.
Moreover, we need to remember this for persistence. This means that
we really have three conclusions for an HTLC: fulfilled, failed,
malformed. Fix up the logic everywhere which assumed failed or
fulfilled.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's easiest to have the master keep the last commit we sent, for
re-transmission. We could recalculate it, but it's made more difficult
by the before/after revoke case.
And because revoke_and_ack changes the channel state, we need to
remember which order we sent them in for re-transmission.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We need this for reestablishing a channel.
(Note: this patch changes quite a bit in this series, but reshuffling was
tedious).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Currently it's fairly ad-hoc, but we need to tell it to channeld when
it restarts, so we define it as the non-HTLC balance.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It needs to save them to the db in case of restart; this means we tell
it about funding_locked, as well as the next_per_commit_point given
in revoke_and_ack.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The channel daemon gets the shared secrets from the HSM to save
the master daemon some work. It used to hand these over at
revoke_and_ack receive, which is when the master daemon needs them.
However, it's a bit simpler to hand them over when we first tell
the master about the incoming HTLC (the first commitsig).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
They share some fields, but they're basically different, and it's clearest
to treat them differently in most places.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
When adding their HTLCs, it needs all the information. When failing,
it needs the id as key and the failure reason. When fulfilling, it
needs the id and payment preimage.
It also needs to know when we have received an revoke_and_ack or a
commitment_signed, to place in the database.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We're about to change to a batch interface, where we tell the master
before we send certain packets (eg. commit, revoke). We need to wait
for it to respond before doing anything else, but it might cross-over
and be sending us commands at the same time.
This queues those requests until we're ready.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This prepares us for handlers turning off peer I/O, rather than assuming
we always want to handle the next incoming message.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We still get the shared secret, since that requires a round trip to the HSM
(why waste the master daemon's time?) but it does the processing, which
simplifies the message passing and things like realm handling which
have nothing to do with this particular channeld.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Some paths were still sending unencrypted failure messages; unify them
all. We need to keep the fail_msg around for resubmission if the
channeld dies; similarly, we need to keep the htlc_end structure
itself after failure, in case the failed HTLC is committed: we can
move it to a minimal archive once it's flushed from both sides,
however.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Means caller has to do some more work, but this is closer to what we want:
we're going to want to send them to the master daemon for atomic commit.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We used level -1 to mean "append to log", but that doesn't actually
work, and results in an assert if we try to prune the logs:
lightningd: daemon/pseudorand.c:36: pseudorand: Assertion `max' failed.
Expose logv_add and use that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We use --log-level to control this, but we could add another switch.
It makes the test infrastructure simpler, since we can just look in the
main logs.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In particular, it reassured me that the ammag obfuscation step occurs
even for the initial failmsg creator.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I actually hit this very hard to reproduce race: if we haven't process
the channeld message when block #6 comes in, we won't send the gossip
message. We wait for logs, but don't generate new blocks, and timeout
on l1.daemon.wait_for_log('peer_out WIRE_ANNOUNCEMENT_SIGNATURES').
The solution, which also tests that we don't send announcement signatures
immediately, is to generate a single block, wait for CHANNELD_NORMAL,
then (in gossip tests), generate 5 more.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Since we have a simple way to query the database for UTXOs we can
simplify some of the coin selection logic. That gets rid of the
in-memory list of UTXOs.
Not the nicest code, but it allows us to store the bip32_max_index so
that we don't forget our addresses upon restart. We could have done
the same by retrieving the max index from our index, but then we'd
forget addresses that don't have an associated output. Conversion
to/from string is so that we can store arbitrary one off values in the
DB in the future, independent of type.
The format we use to generate marshal/unmarshal code is from
the spec's tools/extract-formats.py which includes the offset:
we don't use it at all, so rather than having manually-calculated
(and thus probably wrong) values, or 0, emit it altogther.
Reported-by: Christian Decker
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We use this to make it send the funding_signed message, rather than having
the master daemon do it (which was even more hacky). It also means it
can handle the crypto, so no need for the packet to be handed up encrypted,
and also make --dev-disconnect "just work" for this packet.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We use a file descriptor, so when we consume an entry, we move past it
(and everyone shares a file offset, so this works).
The file contains packet names prefixed by - (treat fd as closed when
we try to write this packet), + (write the packet then ensure the file
descriptor fails), or @ ("lose" the packet then ensure the file
descriptor fails).
The sync and async peer-write functions hook this in automatically.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Header from folded patch 'test-run-cryptomsg__fix_compilation.patch':
test/run-cryptomsg: fix compilation.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Valgrind error file: /tmp/lightning-8k06jbb3/test_disconnect/lightning-7/valgrind-errors
==32307== Uninitialised byte(s) found during client check request
==32307== at 0x11EBAD: memcheck_ (mem.h:247)
==32307== by 0x11EC18: towire (towire.c:14)
==32307== by 0x11EF19: towire_short_channel_id (towire.c:92)
==32307== by 0x12203E: towire_channel_update (gen_peer_wire.c:918)
==32307== by 0x1148D4: send_channel_update (channel.c:185)
==32307== by 0x1175C5: peer_conn_broken (channel.c:1010)
==32307== by 0x13186F: destroy_conn (poll.c:173)
==32307== by 0x13188F: destroy_conn_close_fd (poll.c:179)
==32307== by 0x13B279: notify (tal.c:235)
==32307== by 0x13B721: del_tree (tal.c:395)
==32307== by 0x13BB3A: tal_free (tal.c:504)
==32307== by 0x130522: io_close (io.c:415)
==32307== Address 0xffefff87d is on thread 1's stack
==32307== in frame #2, created by towire_short_channel_id (towire.c:88)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is simpler than passing back and forth, for the moment at least. That
means we don't need to ask for a new one on reconnect.
This partially reverts the gossip handling in openingd, since it no longer
passes the gossip fd back. We also close it when peer is freed, so it
needs initializing to -1.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We can go to release a gossip peer, and it can fail at the same time.
We work around the problem that the reply must be a gossipctl_release_peer_reply
with two fds, but it's not pretty.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We kill the existing connection if possible; this may mean simply
forgetting the prior peer altogether if it's in an early state.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Instead, send it the funding_signed message; it can watch, save to
database, and send it.
Now the openingd fundee path is a simple request and response, too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Simplifies state machine. Master still has to calculate the tx to get
the signature and broadcast, but now the opening daemon funding path
is a simple request/response.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We want to use it in peer_control to generate the transaction, but we
really only need the funding_pubkey.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Like the fd, it's only useful when the peer is not in a daemon, so we
free & NULL it when that happens.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We steal it when we're closing connection, but we normally want to forget
it if connection just dies.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. We explicitly assert what state we're coming from, to make transitions
clearer.
2. Every transition has a state, even between owners while waiting for HSM.
3. Explictly step though getting the HSM signature on the funding tx
before starting channeld, rather than doing it in parallel: makes
states clearer.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We need to do this on every connection, whether reconnecting or not,
so it makes sense for the handshake daemon to handle it and return
the feature fields.
Longer term I'm considering having the handshake daemon handle the
listening and connecting, and simply hand the fds back once the peers
are ready.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We currently create a peer struct, then complete handshake to find out
who it is. This means we have a half-formed peer, and worse: if it's
a reconnect we get two peers the same.
Add an explicit 'struct connection' for the handshake phase, and
construct a 'struct peer' once that's done.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Now in sync with 8ee57b97738b1e9467a1342ca8373d40f0c4aca5.
Our tool doesn't need to convert them any more, but we actually had a
mis-typed field in the HSM which needed fixing.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The single string-based hostname and port has been retired in favor of
having multiple `struct ipaddr`s from the `node_announcement`. This
breaks the hostnames and ports from IRC, but I didn't bother to
backport ipaddr for it since it is only used in the legacy daemon.
Rather a big commit, but I couldn't figure out how to split it
nicely. It introduces a new message from the channel to the master
signaling that the channel has been announced, so that the master can
take care of announcing the node itself. A provisorial announcement is
created and passed to the HSM, which signs it and passes it back to
the master. Finally the master injects it into gossipd which will take
care of broadcasting it.
We alternated between using a sha256 and using a privkey, but there are
numerous places where we have a random 32 bytes which are neither.
This fixes many of them (plus, struct privkey is now defined in terms of
struct secret).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
