v2 channel open uses a different method to derive the channel_id, so now
we save it to the database so that we dont have to remember how to
derive it for each.
includes a migration for existing channels
This is what txsend does, only we have a psbt so we have
to change the db interface to take a wally_tx.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
we're about to add a migration that requires access to the bip32_key
in order to calculate missing scriptpubkeys.
prior to this patch, we don't have access to the bip32 key in the db
migration, as it's set on the wallet but after the db migrations are
run.
here we patch it through so that every migration can access it
We update the `last_tx` in `channels` to be psbt format, instead
of a linearized transaction.
We need the amount of the input populated, which we have since
this is the 'funding' amount. Ideally we'd also populate the funding
scriptPubkey, but to do that we'd need to access the HSM module to fetch
our local funding pubkey, which isn't initialized at the time that the
database migrations are run.
Since the only field the HSM uses currently when signing these is the
amount field, it's ok to just leave it out.
needs a test!
I really want a type which means "I am a wrapped onion reply" as separate
from "I am a normal wire msg". Currently both user u8 *, and I got very
confused trying to figure out where each one was an unwrapped error msg,
or where it still needed (un)wrapping.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This increments the `data_version` upon committing dirty transactions, reads
the last data_version upon startup, and tracks the number in memory in
parallel to the DB (see next commit for rationale).
Changelog-Changed: JSON-RPC: Added a `data_version` field to the `db_write` hook which returns a numeric transaction counter.
1. Printed form is always "[<nodeid>-]<prefix>: <string>"
2. "jcon fd %i" becomes "jsonrpc #%i".
3. "jsonrpc" log is only used once, and is removed.
4. "database" log prefix is use for db accesses.
5. "lightningd(%i)" becomes simply "lightningd" without the pid.
6. The "lightningd_" prefix is stripped from subd log prefixes, and pid removed.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-changed: Logging: formatting made uniform: [NODEID-]SUBSYSTEM: MESSAGE
Changelog-removed: `lightning_` prefixes removed from subdaemon names, including in listpeers `owner` field.
We were implicitly relying on sqlite3 behavior that returns the zero-value for
nulled fields when accessing them. This adds the same behavior explicitly to
the DB abstraction in order to reduce `db_column_is_null` checks in the logic,
but still make it evident what is happening here.
Fixes https://github.com/fiatjaf/mcldsp/issues/1
Signed-off-by: Christian Decker <@cdecker>
Using a generated identifier with filename and line proved to be brittle since
compilers assign the __LINE__ macro differently on multi-line macro
invocations.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Now that all the users are migrated to the abstraction layer we can remove the
legacy implementation.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We now have a much stronger consistency check from the combination of
transaction wrapping, tal memory leak detection. Tramsaction wrapping ensures
that each statement is executed before the transaction is committed. The
commit is also driven by the `io_loop`, which means that it is no longer
possible for us to have statements outside of transactions and transactions
are guaranteed to commit at the round's end.
By adding the tal-awareness we can also get a much better indication as to
whether we have un-freed statements flying around, which we can test at the
end of the round as well.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This is likely the last part we need to completely encapsulate the part of the
sqlite3 API that we were using. Like the `db_count_changes` call I decided to
pass in the `struct db_stmt` since really they refer to the statement that was
executed and not the db.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
These are based on top of the basic column access functions, and act as a
small type-safe wrapper, that also does a bit of validation.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
These are used to do one-time initializations and wait for pending statements
before closing.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
I was hoping to get rid of these by using "ON CONFLICT" upserts, however
sqlite3 only started supporting them in version 3.24.0 which is newer than
some of our deployment targets.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This is the first step towards being able to extract information from query
rows. Only the most basic types are exposed, the others will be built on top
of these primitives.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
These functions implement the lookup of the query, and the dispatch to the
DB-specific functions that do the actual heavy lifting.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This is the counterpart of the annotations we did in the last few commits. It
extracts queries, passes them through a driver-specific query rewriter and
dumps them into a driver-specific query-list, along with some metadata to
facilitate processing later on. The generated query list is then registered as
a `db_config` and will be loaded by the driver upon instantiation.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We will soon generalize the DB, so directly reaching into the `struct db`
instance to talk to the sqlite3 connection is bad anyway. This increases
flexibility and allows us to tailor the actual implementation to the
underlying DB.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
These two simple macros have a twofold use:
1) They serve as annotations for the query extraction tool to find them when
extracting queries from the C source code.
2) They replace the actual queries with names that can be used to lookup the
queries in a table again, once they have been rewritten into the target SQL dialect.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We need to have full DB queries that can be extracted at compile time later in
order to be able to rewrite them in other SQL dialects. In addition we had a
bit of unnecessary code-duplication in db_select and db_select_prepare. Now
the former uses the latter internally.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Dumb programs which have a --daemon option call fork() early. This is
terrible UX since startup errors get lost: the program exits with
"success" immediately then you discover via the logs that it didn't
start at all.
However, forking late introduced a heap of problems with changing
pids. Instead, fork early but keep stderr and the parent around: if
we fail early on, the parent fails with us. We release our parent
with an explicit action just before the main loop.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
These are generalized from our internal implementations.
The main difference is that 'struct json_escaped' is now 'struct
json_escape', so we replace that immediately.
The difference between lightningd's json-writing ringbuffer and the
more generic ccan/json_out is that the latter has a better API and
handles escaping transparently if something slips through (though
it does offer direct accessors so you can mess things up yourself!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Node ids are pubkeys, but we only use them as pubkeys for routing and checking
gossip messages. So we're packing and unpacking them constantly, and wasting
some space and time.
This introduces a new type, explicitly the SEC1 compressed encoding
(33 bytes). We ensure its validity when we load from the db, or get it
from JSON. We still use 'struct pubkey' for peer messages, which checks
validity.
Results from 5 runs, min-max(mean +/- stddev):
store_load_msec,vsz_kb,store_rewrite_sec,listnodes_sec,listchannels_sec,routing_sec,peer_write_all_sec
39475-39572(39518+/-36),2880732,41.150000-41.390000(41.298+/-0.085),2.260000-2.550000(2.336+/-0.11),44.390000-65.150000(58.648+/-7.5),32.740000-33.020000(32.89+/-0.093),44.130000-45.090000(44.566+/-0.32)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I was tempted to create a new db_select_stmt wrapper type, but that means
a lot of boilerplate around binding, which expects to work with db_prepare
*and* db_select_prepare.
This lets us clearly differentiate between db queries (which don't need to
go to a plugin) and db changes (which do).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Allow a function as well as (or instead of!) an sql statement. That
will let us do things like set per-channel values to the global
defaults, for example.
Since we remove the NULL termination, the final entry is ARRAY_SIZE()-1
not ARRAY_SIZE()-2.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I upgraded my node with --disable-compat, and a heap of channels closed like:
CHANNELD_NORMAL:We disagree on short_channel_ids: I have 557653x0x1351, you say 557653x2373x1",
This is because the scids are strings in the databases, and it failed to parse
them properly.
Now we'll not start if that happens.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I would have liked to make it a tal object, then we'd catch most
things with our memleak detection. However, sqlite3 doesn't seem to
allow allocator overrides.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We use it on the secrets array for the moment, but it's also useful
for remote_shutdown_scriptpubkey, as used in the next patch.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is necessary to grad the their_unilateral/to-us outputs since
they aren't being harvested by `onchaind`
Signed-off-by: Christian Decker <decker.christian@gmail.com>
