It was intermittant before: I added a sleep(1) in the code before
sending the error (temporarily) to make it always triggers.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We truncate the file on stop(), but don't re-created it on start().
We didn't notice it before, but the net
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The latter is used when we're put in the db, the former is the uncommitted state.
Currently dbid == 0 is used in addition to the state, which is unwieldy.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Experimental: JSON-RPC: added new dual-funding state `DUALOPEND_OPEN_COMMITTED`
We were allowed to, but the spec removed that. So we handle warnings
differently from errors now.
This also means the LND "internal error" workaround is done in
lightningd (we still disconnect, but we don't want to close channel).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Protocol: we no longer disconnect every time we receive a warning message.
Update the lightningd <-> channeld interface with lots of new commands to needed to facilitate spicing.
Implement the channeld splicing protocol leveraging the interactivetx protocol.
Implement lightningd’s channel_control to support channeld in its splicing efforts.
Changelog-Added: Added the features to enable splicing & resizing of active channels.
This was added to fundpsbt/utxopsbt in v0.10, but the spender plugin
didn't take advantage of it, instead calculating its own change amount
and output.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We use parameterization here. The old `anchor_expected()` was for
non-zero-fee anchors, and have bitrotted so there are some other
changes as well.
Unfortunately, all the anchor accounting seems to be broken, but I
cannot understand these tests at all. I had to simply disable them
for now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We get "disconnected during connection" if we haven't finished processing
the connection when the peer sends error and hangs up.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I never really liked this hack: websockets are useful, advertizing
them not so much.
Note that we never actually documented that we would advertize these!
Changelog-EXPERIMENTAL: Protocol: Removed support for advertizing websocket addresses in gossip.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
CI hit this issue where it would get a tx_abort in fundchannel. This
happens when the dualopend we use to query the feerates has not exited
yet (it waits for the tx_abort reply), and we mistakenly reuse it.
With multi-channel support, this is wrong: just run another one and it
all Just Works.
This means we need to rework our dual_open_control.c logic, since it
would previously create an unsaved channel then not clean up if
something went wrong.
Most people will never try to negotiate opening multiple channels to
the same peer at the same time (vs. having an established channel and
opening a new one), so this case is a bit weird.
```
rates = l1.rpc.dev_queryrates(l2.info['id'], amount, amount)
# l1 leases a channel from l2
l1.rpc.fundchannel(l2.info['id'], amount, request_amt=amount,
feerate='{}perkw'.format(feerate),
> compact_lease=rates['compact_lease'])
tests/test_opening.py:1611:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
contrib/pyln-client/pyln/client/lightning.py:833: in fundchannel
return self.call("fundchannel", payload)
contrib/pyln-testing/pyln/testing/utils.py:721: in call
res = LightningRpc.call(self, method, payload, cmdprefix, filter)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <pyln.testing.utils.PrettyPrintingLightningRpc object at 0x7f6cbcd97950>
method = 'fundchannel'
payload = {'amount': 500000, 'announce': True, 'compact_lease': '029a00640064000000644c4b40', 'feerate': '2000perkw', ...}
cmdprefix = None, filter = None
def call(self, method, payload=None, cmdprefix=None, filter=None):
"""Generic call API: you can set cmdprefix here, or set self.cmdprefix
...
if not isinstance(resp, dict):
raise ValueError("Malformed response, response is not a dictionary %s." % resp)
elif "error" in resp:
> raise RpcError(method, payload, resp['error'])
E pyln.client.lightning.RpcError: RPC call failed: method: fundchannel, payload: {'id': '022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59', 'amount': 500000, 'feerate': '2000perkw', 'announce': True, 'request_amt': 500000, 'compact_lease': '029a00640064000000644c4b40'}, error: {'code': -1, 'message': 'Abort requested', 'data': {'id': '022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59', 'method': 'openchannel_init'}}
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This currently means anchors tests are disabled, awaiting the
PR which implements zero-fee-htlc anchors to reenable them.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And no longer insist on opt_quiesce.
Changelog-EXPERIMENTAL: Config: `--experimental-upgrade-protocol` enables simple channel upgrades.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Using single tuples in Python is ugly, so:
1. Rename wait_for_onchaind_tx to wait_for_onchaind_txs.
2. Make it take tuples explicitly.
3. Make wait_for_onchaind_tx a simpler wrapper/unwrapper.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We always call channel_fail_transient() on all channels when a peer
connects, to clean up any previous connections. However, when
we startup, this channel doesn't have an owner yet, resulting in
a fairly weird INFO level message.
Reported-by: Michael Schmook @mschmook
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: `lightningd`: don't log gratuitous "Peer transient failure" message on first connection after restart.
When a channel open fails, we use tx-abort instead of warning/error.
This means that the peer won't disconnect! And instead when a new
message arrives, we'll need to rebuild the dualopend subd (if missing).
Makes opens a bit easer to retry (no reconnect needed), as well as keeps
the connection alive for other channels we may have with that peer.
Changelog-Changed: Experimental-Dual-Fund: open failures don't disconnect, but instead fail the opening process
This adds the option to explicitly enable ip-discovery, which maybe
helpful for example when a user wants TOR announced along with
discovered IPs to improve connectivity and have TOR just as a fallback.
Changelog-Added: Adds config switch 'announce-addr-discovered': on/off/auto
If we both support large channels, we can actually send giant HTLCs.
This, in turn, fixes pay (which relies on this field!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: Plugins: `pay` now knows it can use locally-connected wumbo channels for large payments.
Fixes: #5250Fixes: #5417
This is the minimal change to meet the desired outcome of https://github.com/lightning/bolts/issues/934
which wants to give obsolete-db nodes a chance to fix things up, before we
close the channel.
We need to dance around a bit here, since we *will* close the channel if
we receive an ERROR, so we suppress that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This adds a new "chan_dying" message to the gossip_store, but since we
already changed the minor version in this PR, we don't bump it again.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: We now delay forgetting funding-spent channels for 12 blocks (as per latest BOLTs, to support splicing in future).
Using `listfowards` for this wrong; expose this directly if people
care (and unlike listforwards, which could be deleted, we have to
remember these while the channel is still open!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `listhtlcs` new command to list all known HTLCS.
This alters the billboard, but that's a human-readable thing so not
noted in CHANGELOG.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `listpeers` `status` now refers to "channel ready" rather than "funding locked" (BOLT language change for zeroconf channels)
Changelog-Added: JSON-RPC: `channel_opened` notification `channel_ready` flag.
Changelog-Deprecated: JSON-RPC: `channel_opened` notification `funding_locked` flag (use `channel_ready`: BOLTs namechange).
This contains the zeroconf stuff, with funding_locked renamed to
channel_ready. I change that everywhere, and try to fix up the
comments.
Also the `alias` field is called `short_channel_id`.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Protocol: `funding_locked` is now called `channel_ready` as per latest BOLTs.
First, how we record "our_funds" and then apply pushes vs lease_fees
(for liquidity ad buys/sales) was exactly opposite.
For pushes we were reporting the total funded into the channel, with the
push representing how much we'd later moved to the peer.
For lease_fees we were rerporting the total in the channel, with the
push representing how much was already moved to the peer.
We fix this (from a view perspective) by re-adding lease fees to what's
reported in the channel funding totals. Since this is now new behavior
(for leased channel values), we added new fields so we can take the old
field names thru a deprecation cycle.
We also make it possible to differentiate btw a push and a lease_fee
(before they were all the same), by adding to new fields to `listpeers`:
`fee_paid_msat` and `fee_rcvd_msat`.
This allows us to avoid math in the bookkeeper, instead we just pick
the numbers out directly and record them.
Fixes#5472
Changelog-Added: JSON-RPC: `listpeers` now has a few new fields for `funding` (`remote_funds_msat`, `local_funds_msat`, `fee_paid_msat`, `fee_rcvd_msat`).
Changelog-Deprecated: JSON-RPC: `listpeers`.`funded` fields `local_msat` and `remote_msat` are now deprecated.
We used to tell connectd to remember our connect delay, and hand it
back (increased if necessary).
Instead, simply record when we last tried to connect. If it was less
than 10 minutes ago, double delay (up to 5 minutes max), otherwise
reset delay to 1 second.
This covers all scenarios: whether we reconnect then immediately
disconnect, or never successfully connect, it doesn't matter.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: #5453
We might only have seen one side of the channel, as shown below. Wait
for both:
```
_____________________________ test_wumbo_channels ______________________________
[gw2] linux -- Python 3.7.13 /opt/hostedtoolcache/Python/3.7.13/x64/bin/python3
node_factory = <pyln.testing.utils.NodeFactory object at 0x7f5d51743b10>
bitcoind = <pyln.testing.utils.BitcoinD object at 0x7f5d51699d10>
@pytest.mark.openchannel('v1')
@pytest.mark.openchannel('v2')
def test_wumbo_channels(node_factory, bitcoind):
l1, l2, l3 = node_factory.get_nodes(3,
opts=[{'large-channels': None},
{'large-channels': None},
{}])
conn = l1.rpc.connect(l2.info['id'], 'localhost', port=l2.port)
expected_features = expected_peer_features(wumbo_channels=True)
if l1.config('experimental-dual-fund'):
expected_features = expected_peer_features(wumbo_channels=True,
extra=[21, 29])
assert conn['features'] == expected_features
assert only_one(l1.rpc.listpeers(l2.info['id'])['peers'])['features'] == expected_features
# Now, can we open a giant channel?
l1.fundwallet(1 << 26)
l1.rpc.fundchannel(l2.info['id'], 1 << 24)
# Get that mined, and announced.
bitcoind.generate_block(6, wait_for_mempool=1)
# Connect l3, get gossip.
l3.rpc.connect(l1.info['id'], 'localhost', port=l1.port)
wait_for(lambda: len(l3.rpc.listnodes(l1.info['id'])['nodes']) == 1)
wait_for(lambda: 'features' in only_one(l3.rpc.listnodes(l1.info['id'])['nodes']))
# Make sure channel capacity is what we expected.
> assert ([c['amount_msat'] for c in l3.rpc.listchannels()['channels']]
== [Millisatoshi(str(1 << 24) + "sat")] * 2)
E assert [16777216000msat] == [16777216000m...777216000msat]
E Right contains one more item: 16777216000msat
E Full diff:
E - [16777216000msat, 16777216000msat]
E + [16777216000msat]
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
