`getblockfrompeer` was introduced in v23.0.0, we want to skip this path
if the version of bitcoind used is below that.
Signed-off-by: Peter Neuroth <pet.v.ne@gmail.com>
In the case that we have peers left in the peers array and that we could
not find the block yet, we ask the next peer for the desired block.
Signed-off-by: Peter Neuroth <pet.v.ne@gmail.com>
We introduce the peers array that contains the known set of connected
peers for future reference in case that we couldn't find the block we
are looking for.
Signed-off-by: Peter Neuroth <pet.v.ne@gmail.com>
We move the `geblock` call into a separate function. This allows us to
call if from various places in the future.
Signed-off-by: Peter Neuroth <pet.v.ne@gmail.com>
This allows us to intercept getblock on a non 0 exit when the block was
not found. We fill this with something meaningull in future commits.
Signed-off-by: Peter Neuroth <pet.v.ne@gmail.com>
We've stomped errno, so if exec fails we don't get a reliable result:
```
2023-08-07T17:58:45.713Z **BROKEN** plugin-bcli: bitcoin-cli exec failed: Bad file descriptor
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Caught by leak detection, we just re-assigned this when we retried: sure,
it's temporary, but it's technically a leak.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I shut down bitcoind during a test, and bcli leak reports flooded in.
They're all temporary, but this fixes them.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
When core lightning is asking the information about
the blockchain with `getchaininfo` command lightningd
know already the information about the min and max block height.
the problem is when we have a smarter Bitcoin backend that is able
to switch between different clients in some cases is helpful
give the information about current known height by lightningd and
pass it down to the plugin.
In this way, the plugin knows what is the correct known height from lightnind, and can
try to fix some problems if any exit.
This is particularly useful when you are syncing a new backend from scratch
like https://github.com/cloudhead/nakamoto and we avoid returning the
lower height from the known, and avoid the crash of core lightning.
With this information, the plugin can start to sync the chain and return
the answer back only when the chain is in sync with the current status of
lightningd.
Another reason to add this field and not wait the correct block in core
lightning itself is because Bitcoin Core is extremely slow to sync up,
so the question here is, how long should we wait? The time depends
on various factors.
With this approach of informing the plugin about the height, in some cases,
you can start the syncing but move the execution to another backend until
the previous one is ready.
The problem I want to solve is that I don't want to be left in the dark when
we run `getchaininfo`, and I want to have the opportunity to wait for
the blockchain sync or decide to dispatch the request elsewhere.
Changelog-Added: Pass the current known block height down to the getchaininfo call.
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Fixes: #4473
Changelog-Deprecated: Plugins: `estimatefees` returning feerates by name (e.g. "opening"); use `fee_floor` and `feerates`.
Changelog-Fixed: Plugins: `bcli` now tells us the minimal possible feerate, such as with mempool congestion, rather than assuming 1 sat/vbyte.
Turns out the two bcli replacements I checked (`sauron` and
`trustedcoin`) don't even implement this, and the multiplier makes
more sense in lightningd, especially as we move to bcli just providing
raw feerate estimates.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is what we do in lightningd, which makes memleak much more forgiving:
you can hang temporaries off cmd without getting reports of leaks (also
when send_outreq called).
We remove all the notleak() calls in plugins which worked around this!
And avoid multiple notleak labels, since both send_outreq() and
command_still_pending() can be called multiple times.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We have them split over common/param.c, common/json.c,
common/json_helpers.c, common/json_tok.c and common/json_stream.c.
Change that to:
* common/json_parse (all the json_to_xxx routines)
* common/json_parse_simple (simplest the json parsing routines, for cli too)
* common/json_stream (all the json_add_xxx routines)
* common/json_param (all the param and param_xxx routines)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We had json_add_amount_msat_only(), which was designed to be used to
print out msat fields, if we had sats.
However, we misused it, so split it into the three different cases:
1. json_add_amount_sat_msat: We are using it correctly, with a field called
xxx_msat.
2. json_add_amount_sats_deprecated: We were using it wrong, so deprecate
the old field and create a new one which does end in _msat.
3. json_add_sats: we were using it to hand sats as a JSON parameter to an
interface, where "XXXsat".
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: Plugins: `rbf_channel` and `openchannel2` hooks `their_funding` (use `their_funding_msat`)
Changelog-Deprecated: Plugins: `openchannel2` hook `dust_limit_satoshis` (use `dust_limit_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `funding_satoshis` (use `funding_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `dust_limit_satoshis` (use `dust_limit_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `channel_reserve_satoshis` (use `channel_reserve_msat`)
Changelog-Deprecated: Plugins: `channel_opened` notification `amount` (use `funding_msat`)
Changelog-Deprecated: JSON-RPC: `listtransactions` `msat` (use `amount_msat`)
Changelog-Deprecated: Plugins: `htlc_accepted` `forward_amount` (use `forward_msat`)
And turn "" includes into full-path (which makes it easier to put
config.h first, and finds some cases check-includes.sh missed
previously).
config.h sets _GNU_SOURCE which really needs to be done before any
'#includes': we mainly got away with it with glibc, but other platforms
like Alpine may have stricter requirements.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Before:
Ten builds, laptop -j5, no ccache:
```
real 0m36.686000-38.956000(38.608+/-0.65)s
user 2m32.864000-42.253000(40.7545+/-2.7)s
sys 0m16.618000-18.316000(17.8531+/-0.48)s
```
Ten builds, laptop -j5, ccache (warm):
```
real 0m8.212000-8.577000(8.39989+/-0.13)s
user 0m12.731000-13.212000(12.9751+/-0.17)s
sys 0m3.697000-3.902000(3.83722+/-0.064)s
```
After:
Ten builds, laptop -j5, no ccache: 8% faster
```
real 0m33.802000-35.773000(35.468+/-0.54)s
user 2m19.073000-27.754000(26.2542+/-2.3)s
sys 0m15.784000-17.173000(16.7165+/-0.37)s
```
Ten builds, laptop -j5, ccache (warm): 1% faster
```
real 0m8.200000-8.485000(8.30138+/-0.097)s
user 0m12.485000-13.100000(12.7344+/-0.19)s
sys 0m3.702000-3.889000(3.78787+/-0.056)s
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This lets memleak track them, but makes sure they don't leak; using
notleak could cover up a leak here.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We didn't set this to false on non-regtest!
```
==198363== Conditional jump or move depends on uninitialised value(s)
==198363== at 0x10EF88: estimatefees_parse_feerate (bcli.c:443)
==198363== by 0x10F3BF: estimatefees_second_step (bcli.c:550)
==198363== by 0x10E720: bcli_finished (bcli.c:258)
==198363== by 0x1438A7: destroy_conn (poll.c:244)
==198363== by 0x1438CB: destroy_conn_close_fd (poll.c:250)
==198363== by 0x151A7A: notify (tal.c:240)
==198363== by 0x151F91: del_tree (tal.c:402)
==198363== by 0x15232D: tal_free (tal.c:486)
==198363== by 0x141EB8: io_close (io.c:450)
==198363== by 0x14400B: io_loop (poll.c:449)
==198363== by 0x114BB0: plugin_main (libplugin.c:1414)
==198363== by 0x1105C4: main (bcli.c:973)
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Users are more upset recently with the cost of unilateral closes
than they are the risk of being cheated. While we complete our
anchor implementation so we can use low fees there, let's
get less aggressive (we already have 34 or 18 blocks to close
in the worst case).
The changes are:
- Commit transactions were "2 CONSERVATIVE" now "6 ECONOMICAL".
- HTLC resolution txs were "3 CONSERVATIVE" now "6 ECONOMICAL".
- Penalty txs were "3 CONSERVATIVE" now "12 ECONOMICAL".
- Normal txs were "4 ECONOMICAL" now "12 ECONOMICAL".
There can be no perfect levels, but we have had understandable
complaints recently about how high our default fee levels are.
Changelog-Changed: Protocol: channel feerates reduced to bitcoind's "6 block ECONOMICAL" rate.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Saves a great deal of confusion for regtest users.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: If bitcoind won't give a fee estimate in regtest, use minimum.
This makes for more useful errors. It prints where it was up to in
the guide, but doesn't print the entire JSON it's scanning.
Suggested-by: Christian Decker
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We're rarely in a hurry here, and bitcoind is aggressive with fees.
You can always spend this output if you really have to, using CPFP.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Protocol: mutual closing feerate reduced to "slow" to avoid overpaying.
Changelog-Deprecated: plugin: `bcli` replacements should note that `sendrawtransaction` now has a second required Boolean argument, `allowhighfees`, which if `true`, means ignore any fee limits and just broadcast the transaction. Use `--deprecated-apis` to use older `bcli` replacement plugins that only support a single argument.
We were using `tal_fmt` to truncate off the last byte of the
response (newline), which required an allocation, a call to `vsnprintf` and a
copy of the block contents. This being >2MB in size on mainnet was rather
expensive.
We now just signal the end of the string by overwriting the trailing newline,
and stealing directly onto the result.
We've had problems with blocksonly in the past and bitcoind still allows
to use outdated (thus potentially dangerous estimates) while running
bitcoin with -blocksonly.
ZmnSCPxj mentionned that we still don't document this, but i figured
that in this specific case an explicit check and error seems preferable.
Changelog-Added: We now explicitly check at startup that our default Bitcoin backend (bitcoind) does relay transactions.
Proposed-by: ZmnSCPxj <zmnscpxj@protonmail.com>
Signed-off-by: Antoine Poinsot <darosior@protonmail.com>
This allows us to kill two birds with one stone: once connected, we use
the output of the successful call to do some sanity checks (only
checking the version for now, but more are yet to come!).
Changelog-Added: We now explicitly check at startup the version of our default Bitcoin backend (bitcoind).
Co-Authored-by: ZmnSCPxj <zmnscpxj@protonmail.com>
Signed-off-by: Antoine Poinsot <darosior@protonmail.com>
