This means we can see the values in listconfigs, even if we haven't set
them yet.
In particular, we now see the following:
* autoclean-cycle.value_int=3600
* bitcoin-rpcclienttimeout.value_int=60
* bitcoin-retry-timeout.value_int=60
* funder-max-their-funding.value_str=4294967295sat
* funder-per-channel-min.value_str=10000sat
* funder-reserve-tank.value_str=0sat
* funder-fund-probability.value_int=100
Changelog-Changed: plugins: libplugin now shows plugin option default values (where they're non-trivial)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Our fetchinvoice always creates a reply path which terminates at their peer,
so we need a dev overrride for that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: offers: we now understand blinded paths which use a short-channel-id(+direction) as entry point.
We don't actually support it yet, but this threads through the type change,
puts it in "decode" etc.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This has the benefit of being shorter, as well as more reliable (you
will get a link error if we can't print it, not a runtime one!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I noticed that run-route-infloop chose some worse-looking paths after
routing was fixed, eg the second node:
Before:
Destination node, success, probability, hops, fees, cltv, scid...
02b3aa1e4ed31be83cca4bd367b2c01e39502cb25e282a9b4520ad376a1ba0a01a,1,0.991856,2,1004,40,2572260x39x0/1,2131897x45x0/0
After:
Destination node, success, probability, hops, fees, cltv, scid...
02b3aa1e4ed31be83cca4bd367b2c01e39502cb25e282a9b4520ad376a1ba0a01a,1,0.954540,3,1046,46,2570715x21x0/1,2346882x26x14/1,2131897x45x0/0
This is because although the final costs don't reflect it, routing was taking
into account local channels, and 2572260x39x0/1 has a base fee of 2970.
There's an easy fix: when we the pay plugin creates localmods for our
gossip graph, add all local channels with delay and fees equal to 0.
We do the same thing in our unit test. This improves things across
the board:
Linear success probability (when found): min-max(mean +/- stddev)
Before: 0.487040-0.999543(0.952548+/-0.075)
After: 0.486985-0.999750(0.975978+/-0.053)
Hops:
Before: 1-5(2.98374+/-0.77)
After: 1-5(2.09593+/-0.63)
Fees:
Before: 0-50848(922.457+/-2.7e+03)
After: 0-50041(861.621+/-2.7e+03)
Delay (blocks):
Before: 0-196(65.8081+/-60)
After: 0-190(60.3285+/-60)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Plugins: `pay` route algorithm doesn't bias against our own "expensive" channels any more.
This integrates them with configvars properly: they almost "just work"
in listconfigs now, and we don't put them in a special sub-object
under their plugin.
Unfortunately, this means `listconfigs` now has a loose schema: any
plugin can add something to it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: Plugins: reloaded plugins get passed any vars from configuration files.
Changelog-Deprecated: Config: boolean plugin options set to `1` or `0` (use `true` and `false` like non-plugin options).
While the user trying to fetch an invoice by specifing the quantity we do
not work as expected.
Running the command
```
lightning-cli fetchinvoice -k offer='lno1qgsqvgnwgcg35z6ee2h3yczraddm72xrfua9uve2rlrm9deu7xyfzrcgqffqszsk2p6hycmgv9ek2grpyphxjcm9ypmkjer8v46pyzmhd9jxwet5wvhxxmmdzsqs593pq0ylsvakdua5h976f4g3eautgjt3udvtyga47eaw7339sjrhpwpwz' quantity=2
```
and we answer back with
```json
{
"code": -32602,
"message": "quantity parameter required"
}
```
This is caused because we forget to bind the `quanity` field from the
RPC into the `invrequest`.
Reported-by: @aaronbarnardsound
Link: https://github.com/ElementsProject/lightning/issues/6089
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Changelog-EXPERIMENTAL: fetchinvoice: fix: do not ignore the `quantity` field
into the invreq field.
```
make check-source-bolt CHECK_BOLT_PREFIX="--prefix=BOLT-offers" BOLTVERSION=guilt/offers
```
In this case, only trivial mods.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is how we put new invoice_requests into the db; this will be used
by a new "invoicerequest" command which replaces "offerout".
The API is now the same as the offers api.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We no longer have to refer back to the offer for which we're making
the invoice_request, or to the invoice_request we made for an invoice,
as they are all mirrored (and we check!).
It's clearer to simply look at the object directly.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I know this is an unforgivably large diff, but the spec has changed so
much that most of this amounts to a rewrite.
Some points:
* We no longer have "offer_id" fields, we generate that locally, as all
offer fields are mirrored into invoice_request and then invoice.
* Because of that mirroring, field names all have explicit offer/invreq/invoice
prefixes.
* The `refund_for` fields have been removed from spec: will re-add locally later.
* quantity_min was removed, max == 0 now mean "must specify a quantity".
* I have put recurrence fields back in locally.
This brings us to 655df03d8729c0918bdacac99eb13fdb0ee93345 ("BOLT 12:
add explicit invoice_node_id.")
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We had a scheme where lightningd itself would put a per-node secret in
the blinded path, then we'd tell the caller when it was used. Then it
simply checks the alias to determine if the correct path was used.
But this doesn't work when we start to offer multiple blinded paths.
So go for a far simpler scheme, where the secret is generated (and
stored) by the caller, and hand it back to them.
We keep the split "with secret" or "without secret" API, since I'm
sure callers who don't care about the secret won't check that it
doesn't exist! And without that, someone can use a blinded path for a
different message and get a response which may reveal the node.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We actually want lightningd to create these, since it wants to put the
path_id secret in the last element. So best API is actually a generic
one, rather than separate APIs to create first and last ones.
And really, the more explicit initialization makes the users clearer.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Mainly, field name changes.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: Protocol: Support for forwarding blinded payments (as per latest draft)
It's 2b7ad577d7a790b302bd1aa044b22c809c76e49d, which reverts the
point32 changes.
It also restores send_invoice in `invoice`, which we had removed
from spec and put into the recurrence patch.
I originally had implemented compatibility, but other changes
which followed this are far too widespread.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: offers: complete rework of spec from other teams (yay!) breaks previous compatibility (boo!)
We have them split over common/param.c, common/json.c,
common/json_helpers.c, common/json_tok.c and common/json_stream.c.
Change that to:
* common/json_parse (all the json_to_xxx routines)
* common/json_parse_simple (simplest the json parsing routines, for cli too)
* common/json_stream (all the json_add_xxx routines)
* common/json_param (all the param and param_xxx routines)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The name in the spec is `msat`, but I don't want to make an API exception.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `fetchinvoice` `changes` `amount_msat`
Changelog-Deprecated: JSON-RPC: `fetchinvoice` `changes` `msat` (use `amount_msat`)
This is consistent with our output changes, and increases consistency.
It also keeps future sanity checks happy, that we only use JSON msat
helpers with '_msat' fields.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `invoice`, `sendonion`, `sendpay`, `pay`, `keysend`, `fetchinvoice`, `sendinvoice`: `msatoshi` argument is now called `amount_msat` to match other fields.
Changelog-Deprecated: JSON-RPC: `invoice`, `sendonion`, `sendpay`, `pay`, `keysend`, `fetchinvoice`, `sendinvoice` `msatoshi` (use `amount_msat`)
I removed these prematurely: we *haven't* had a release since
introducing them!
This consists of reverting d15d629b8b
"plugins/fetchinvoice: remove obsolete string-based API." and
plugins/fetchinvoice: remove obsolete string-based
API. "onion_messages: remove obs2 support."
Some minor changes due to updated fromwire_tlv API since they
were removed, but not much.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: REVERT: Removed backwards compat with onion messages from v0.10.1.
Requiring the caller to allocate them is ugly, and differs from
other types.
This means we need a context arg if we don't have one already.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
No more "towire_offer", but "towire_tlv_offer".
This means we double-up on the unfortunately-named `tlv_payload` inside
the onion, but we should rename that in the spec when we remove
old payloads.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In particular, this changes the name of a field in invoice_request:
`payer_signature` becomes simply `signature`. So we allow both for
now, and send the old one unless deprecated_apis is disabled.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And turn "" includes into full-path (which makes it easier to put
config.h first, and finds some cases check-includes.sh missed
previously).
config.h sets _GNU_SOURCE which really needs to be done before any
'#includes': we mainly got away with it with glibc, but other platforms
like Alpine may have stricter requirements.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
