Otherwise, we might find an address other than the one given and
the user might think that address worked.
Fixes: #4185
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `connect` returns `address` it actually connected to
And update all the in-tree callers.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: JSON-RPC: `fundchannel_complete` `txid` and `txout` parameters (use `psbt`)
Changelog-Added: lightningd: experimental-shutdown-wrong-funding to allow remote nodes to close incorrectly opened channels.
Changelog-Added: JSON-RPC: close has a new `wrong_funding` option to try to close out unused channels where we messed up the funding tx.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There's a version of this that keeps the PSBT in memory and does some
fancy addition/subtraction of unuseable parts for the v2's, however
it's much easier and simpler to simply error on the peer and re-start
from the very beginning.
This only works if we haven't gotten commitments from the peer yet (in
fact either method would only work if we haven't got commitments from
the peer yet), so if we've got commitments from them we simply mark them
as failed an go again.
In a perfect world, we'd remember what inputs we used last time, and
reuse those again on the re-attempt, which would pefectly guarantee both
that the failed opens (ones w/ commitments exchanged) would be canceled
after this completes (and we could re-try the failed again).
As it is, this is not perfect. It is, however, servicable.
Allows us to clean up an in-progress open that we won't be completing
Changelog-Added: EXPERIMENTAL JSON-RPC: Permit user-initiated aborting of in-progress opens. Only valid for not-yet-committed opens and RBF-attempts
The `rbf_channel` hook uses `our_funding_msat`, which is a nicer
and more easily understood than the `openchannel2`
`accepter_funding_msat`.
This updates the `openchannel2` hook to use the same nomenclature as
`rbf_channel`.
We were not aborting if we had routehints, even though all routehints
may have been filtered out.
Changelog-Fixed: pay: `pay` will now abort early if the destination is not reachable directly nor via routehints.
We would happily spin on attempts that are doomed to fail because we
don't know the entrypoint. Next up: remove routehints whose
entrypoints are known but unreachable.
We consolidate to the latest/singular RFC patch for dual-funding, so
there's just a single patchfile for the change. Plus we move back to the
opener setting the desired feerate, the accepter merely declines to
participate if they disagree with the set rate.
Looks like #4394 treated a symptom but not the root cause. We were
actually sending the message framed with the WIRE_CUSTOMMSG_OUT and
the length prefix over the encrypted connection to the peer. It just
happened to be a valid custommsg...
This fixes the issue, and this time I made sure we actually send the
raw message over the wire. However for backward compatibility we
needed to imitate the faulty behavior which is 90% of this patch :-)
Changelog-Fixed: plugin: `dev-sendcustommsg` included the type and length prefix when sending a message.
Users have no idea what they would pay for unilateral closes.
At least this gives them a clue!
Reported-by: @az0re on IRC.
Changelog-Added: JSON-RPC: `listpeers` now shows latest feerate and unilaral close fee.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The spec doesn't say to do this, but it makes sense, otherwise
they'll never be able to mutually close the channel.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We were always prefixing the `message` field with the internal type
prefix 0x0407, followed by the length prefix. Neither is needed since
the type being constant is of no interest to the plugin and the length
being implicit due to the JSON-encoding.
Reported-by: Ilya Evdokimov
Changelog-Fixed: plugin: The `custommsg` hook no longer includes the internal type prefix and length prefix in its `payload`
Changelog-Deprecated: plugin: The `message` field on the `custommsg` hook is deprecated in favor of the `payload` field, which skips the internal prefix.
They need to specify fees to get a channel before this, but it's possible.
The test revealed no surprises (other than the last change).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Saves a great deal of confusion for regtest users.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: If bitcoind won't give a fee estimate in regtest, use minimum.
This avoids spamming the logs. We also remove the duplicate debug
logs on self-disable (plugin_kill logs it for us).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If a plugin died due to connection close, we'd always say
"Plugin exited before completing handshake.", which was often
wrong.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If not all nodes are up-to-date with the new blocks, they can reject
announcements:
```
lightningd-4: 2021-02-23T02:02:47.832Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-gossipd: Ignoring future channel_announcment for 124x1x0 (current block 123)
lightningd-4: 2021-02-23T02:02:47.848Z DEBUG lightningd: Adding block 133: 2d950451211398de9c10bf9df7eb53b385390eca31e306bc8fc1387b53d9f9a2
lightningd-4: 2021-02-23T02:02:47.865Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-gossipd: Bad gossip order: WIRE_CHANNEL_UPDATE before announcement 124x1x0/0
lightningd-4: 2021-02-23T02:02:47.866Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-gossipd: Bad gossip order: WIRE_CHANNEL_UPDATE before announcement 124x1x0/1
```
Technically, this change is not sufficient either, since *gossipd* might
not know about new block yet. But it makes this case less likely.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We get a label clash: easy, just re-serve:
```
2021-02-18T04:29:37.474Z **BROKEN** plugin-offers: Failed invoice_request lnr1qgsqvgnwgcg35z6ee2h3yczraddm72xrfua9uve2rlrm9deu7xyfzrcyyqwtp0rmsgquvuacqcl5cdfzwzmu3v8tqgvpqs8e80dlmxm7ey4xwrqdsqqqqqqqqqqqqqqqq2pqqfqpqynzqzx9rylzy40ernj4jzc3p2dwy3n8x6lqeaywwk725ghx4kx63pcfxgg2z3nsn80jzge06nt3ks8pr6rvnujq48376lpmrr3cq04nurpy783eyr0awh5773lrlmjek07rjf0nx4g9235ulkcs7jp2h5gumjyquhadh846da3jptxm9g0qz5lne4hjhag for offer 1cb0bc7b8201c673b8063f4c352270b7c8b0eb02181040f93bdbfd9b7ec92a67: Got JSON error: {\"code\":900,\"message\":\"Duplicate label\",\"data\":{\"label\":\"1cb0bc7b8201c673b8063f4c352270b7c8b0eb02181040f93bdbfd9b7ec92a67-08c5193e2255f91ce5590b110a9ae2466736be0cf48e75bcaa22e6ad8da88709-1\",\"bolt12\":\"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\",\"payment_hash\":\"396250395aa046f4c58162a5ae31952d01bd0c8e5213f32e748ec428a9379cd2\",\"msatoshi\":7700446,\"amount_msat\":\"7700446msat\",\"status\":\"unpaid\",\"description\":\"Weekly coffee for rusty!\",\"expires_at\":1614832137,\"local_offer_id\":\"1cb0bc7b8201c673b8063f4c352270b7c8b0eb02181040f93bdbfd9b7ec92a67\"}}
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We used to only set it for single-use offers (where it's required),
but it's still interesting for multi-use offers, so let's keep it
there.
We also put this field in the documentation.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Nested `with` exception checks don't work; fix flakes i'm seeing with
valgrind causing failures because blockchain not up to date when
`fundchannel` called.
We weren't waiting for the channel to get to normal state:
E pyln.client.lightning.RpcError: RPC call failed: method: pay, payload: {'bolt11': 'lnbcrt20m1pszfpezpp549um3vuyt52rgea32g7u55a5fv29yv7t94cmr2f0vjgcc33m3dvqdqzdgxqyjw5qcqp9sp59vu4tat2n53ylzrgxa95s5wu2s885a9llud64c0f6gjqts7h6tks9qy9qsq7u0j3w2h3sxxp9axpjxkz525znjn0t92gnrgk7y6plyq39zw9994g88xxjx52egk4965dp5qt2w08hk009eq9hm8nykwmxe7r705k8gpkqu9mw'}, error: {'code': 210, 'message': 'Ran out of routes to try after 1 attempt: see `paystatus`', 'attempts': [{'status': 'failed', 'failreason': 'Cannot attempt payment, we have no channel to which we can add an HTLC', 'partid': 1, 'amount': '2000000000msat'}]}
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
LightningNode.join_nodes and LightningNode.openchannel internally
generate blocks, which causes nodes to be out of sync, and ignore
"future" announcements, because they haven't seen that block yet.
It was using a trick to only shut down the first node, and forgetting
about the others. This could lead to processes not being stopped
correctly and to test failures because the directory isn't cleaned up
correctly.
Now we use the executor to shut as many nodes as possible in parallel.
