We have them split over common/param.c, common/json.c,
common/json_helpers.c, common/json_tok.c and common/json_stream.c.
Change that to:
* common/json_parse (all the json_to_xxx routines)
* common/json_parse_simple (simplest the json parsing routines, for cli too)
* common/json_stream (all the json_add_xxx routines)
* common/json_param (all the param and param_xxx routines)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Per BIP-0171, the signature map is of pubkey to "The signature as would
be pushed to the stack from a scriptSig or witness".
Fixes 5298
Changelog-Fixed: PSBT: Fix signature encoding to comply with BIP-0171.
Signed-off-by: Jon Griffiths <jon_p_griffiths@yahoo.com>
Procedure redefinition is a very cool feature but when other libraries redefine the same function can be very tricky to avoid compilation error.
This PR proposed a change of logic and use a customizzation function definition to read from the stdin, so we can avoid future error at compile time.
However, we could be check also the os or compiler that cause the error and redefine the missing function.
Changelog-None: Fixed compilation error due redefinition procedure.
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
connectd is going to end up using this do demux; make it fast and complete.
Fixing this reveals a problem in openingd: it now extracts the channel_id
from funding_signed (which is where we transition off the temporary), and
gets upset. So fix that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Before:
Ten builds, laptop -j5, no ccache:
```
real 0m36.686000-38.956000(38.608+/-0.65)s
user 2m32.864000-42.253000(40.7545+/-2.7)s
sys 0m16.618000-18.316000(17.8531+/-0.48)s
```
Ten builds, laptop -j5, ccache (warm):
```
real 0m8.212000-8.577000(8.39989+/-0.13)s
user 0m12.731000-13.212000(12.9751+/-0.17)s
sys 0m3.697000-3.902000(3.83722+/-0.064)s
```
After:
Ten builds, laptop -j5, no ccache: 8% faster
```
real 0m33.802000-35.773000(35.468+/-0.54)s
user 2m19.073000-27.754000(26.2542+/-2.3)s
sys 0m15.784000-17.173000(16.7165+/-0.37)s
```
Ten builds, laptop -j5, ccache (warm): 1% faster
```
real 0m8.200000-8.485000(8.30138+/-0.097)s
user 0m12.485000-13.100000(12.7344+/-0.19)s
sys 0m3.702000-3.889000(3.78787+/-0.056)s
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This can be suppressed with -N.
Note that we wull get an error with older lightningd, but we ignore it
anyway.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: cli: print notifications and progress bars if commands provide them.
Greatly simplify the changeset API. Instead of 'diff' we simply generate
the changes.
Also pulls up the 'next message' method, as at some point the
interactive tx protocol will be used for other things as well
(splices/closes etc)
Suggested-By: @rustyrussell
I crashed it using `-H listconfigs`
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: cli: fixed crash with `listconfigs` in `-H` mode
We create ALL_PROGRAMS, ALL_TEST_PROGRAMS, ALL_C_SOURCES and
ALL_C_HEADERS. Then the toplevel Makefile knows which are
autogenerated (by wildcard), so it can have all the rules to clean
them or check the source as necessary.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We don't preserve detailed asset information at the moment, so provide a
way to convert from a sat to an amount_asset struct.
We also need a way to convert from an 'amount_asset' to a 'value' for
elements, which for explicit (i.e. non-blinded) asssets is a 0x01 prefix
plus the big-endian encoded value.
Our existing coin_moves tracking logic assumed that any tx we had an
input in belonged to *all* of our wallet (not a bad assumption as long
as there was no way to update a tx that spends our wallets)
Now that we've got `signpsbt` implemented, however, we need to be
careful about how we account for withdrawals. For now we do a best guess
at what the feerate is, and lump all of our spent outputs as a
'withdrawal' when it's impossible to disambiguate
Now that we have json_stream in common/, we can move all the related
helpers from lightningd/json to common/json. This way everyone can
benefit of them (including libplugin, the plugins themselves,
potentially lightning-cli), not lightningd alone!
Note that the Makefile of the common/test/ had to be modified, because
the new helpers make use of common/wireaddr... Which turns out to
\#include <lightingd/lightningd.h> ! So we couldnt just include the .c
and add mocks if we redefined some structs (hello run-param).
Changelog-changed: .lightningd plugins and files moved into <network>/ subdir
Changelog-changed: WARNING: If you don't have a config file, you now may need to specify the network to lightning-cli
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
lightning-cli is going to need to know what network we're on, so
it will need to parse the config files. Move the code which does
the initial bootstrap parsing into common, as well as the config
file parsing core.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Currently the only source for amount_asset is the value getter on a tx output,
and we don't hand it too far around (mainly ignoring it if it isn't the
chain's main currency). Eventually we could bubble them up to the wallet, use
them to select outputs or actually support assets in the channels.
Since we don't hand them around too widely I thought it was ok for them to be
pass-by-value rather than having to allocate them and pass them around by
reference. They're just 41 bytes currently so the overhead should be ok.
Signed-off-by: Christian Decker <@cdecker>
These are generalized from our internal implementations.
The main difference is that 'struct json_escaped' is now 'struct
json_escape', so we replace that immediately.
The difference between lightningd's json-writing ringbuffer and the
more generic ccan/json_out is that the latter has a better API and
handles escaping transparently if something slips through (though
it does offer direct accessors so you can mess things up yourself!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
A new field is available in the command json object : 'category' (corresponding to whether "bitcoin", "channel", "network", "payment", "plugin", "utility", "developer"). We use it to printf commands ordered by categories.
credits @rustyrussel
We use raw malloc here, again, to handle the failure cases more easily.
I tested it with this hack, then ran the result through `jq --stream '.'`
before and after to make sure it was the same.
diff --git a/cli/lightning-cli.c b/cli/lightning-cli.c
index f840c0786..d83555a51 100644
--- a/cli/lightning-cli.c
+++ b/cli/lightning-cli.c
@@ -295,6 +295,14 @@ static void oom_dump(int fd, char *resp, size_t resp_len, size_t off)
exit(0);
}
+static void *xrealloc(void *p, size_t len)
+{
+ if (len > 1000000)
+ return NULL;
+ return realloc(p, len);
+}
+#define realloc xrealloc
+
int main(int argc, char *argv[])
{
setup_locale();
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
* remove libbase58, use base58 from libwally
This removes libbase58 and uses libwally instead.
It allocates and then frees some memory, we may want to
add a function in wally that doesn't or override
wally_operations to use tal.
Signed-off-by: Lawrence Nahum lawrence@greenaddress.it
The user can explicitly create such things (within [] or ") as we paste
those cases literally, but not for the simple cases.
Fixes: #2550
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
They're generally used pass-by-copy (unusual for C structs, but
convenient they're basically u64) and all possibly problematic
operations return WARN_UNUSED_RESULT bool to make you handle the
over/underflow cases.
The new #include in json.h means we bolt11.c sees the amount.h definition
of MSAT_PER_BTC, so delete its local version.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's the only user of them, and it's going to get optimized.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
gossip.pydiff --git a/common/test/run-json.c b/common/test/run-json.c
index 956fdda35..db52d6b01 100644
tal_count() is used where there's a type, even if it's char or u8, and
tal_bytelen() is going to replace tal_len() for clarity: it's only needed
where a pointer is void.
We shim tal_bytelen() for now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
