As per proposal in https://github.com/lightning/bolts/pull/962
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Removed: protocol: support for legacy onion format removed, since everyone supports the new one.
We also no longer strip the type off: everyone handles both forms, and
Eclair doesn't strip (and it's easier!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If we initialized the payment, the fees are the entire fee-chain
(final hop amount - starting hop amount)
If it's a payment we routed, the fees are the diff between the
inbound htlc and the outbound (net gain by this routing)
Added to database so data persists nicely.
We record the amount of fees collected for a routed payment. For
simplicity's sake on the data agg side, we record the fee payment on
*BOTH* the incoming htlc and the outgoing htlc. Note that this results
in double counting if you add up the fees from both an in-routed and
out-routed payment.
we used this originally to suppress duplicate issuance of coin-move
events; we're assuming that any plugin expects duplicate events though
(and knows how to de-dupe them), so we no longer need this logic.
And turn "" includes into full-path (which makes it easier to put
config.h first, and finds some cases check-includes.sh missed
previously).
config.h sets _GNU_SOURCE which really needs to be done before any
'#includes': we mainly got away with it with glibc, but other platforms
like Alpine may have stricter requirements.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If we're over the dust limit, we fail it immediatey *after* commiting
it, but we need a way to signal this throughout the lifecycle, so we add
it to htlc_in struct and persist it through to the database.
If it's supposed to be failed, we fail after the commit cycle is
completed.
This was measured as a 95th percentile in our rough testing, thanks to
all the volunteers who monitored my channels.
Fixes: #4761
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `setchannelfee` gives a grace period (`enforcedelay`) before rejecting old-fee payments: default 10 minutes.
Before:
Ten builds, laptop -j5, no ccache:
```
real 0m36.686000-38.956000(38.608+/-0.65)s
user 2m32.864000-42.253000(40.7545+/-2.7)s
sys 0m16.618000-18.316000(17.8531+/-0.48)s
```
Ten builds, laptop -j5, ccache (warm):
```
real 0m8.212000-8.577000(8.39989+/-0.13)s
user 0m12.731000-13.212000(12.9751+/-0.17)s
sys 0m3.697000-3.902000(3.83722+/-0.064)s
```
After:
Ten builds, laptop -j5, no ccache: 8% faster
```
real 0m33.802000-35.773000(35.468+/-0.54)s
user 2m19.073000-27.754000(26.2542+/-2.3)s
sys 0m15.784000-17.173000(16.7165+/-0.37)s
```
Ten builds, laptop -j5, ccache (warm): 1% faster
```
real 0m8.200000-8.485000(8.30138+/-0.097)s
user 0m12.485000-13.100000(12.7344+/-0.19)s
sys 0m3.702000-3.889000(3.78787+/-0.056)s
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If commitment_revocation hook is not being used for a whatchtower but
something else, the channel_id is missing.
Changelog-Added: addes channel_id and commitnum to commitment_revocation hook
Changelog-Changed: Change order parameters in the listforwards command
Changelog-Deprecated: Change order of the status parameter in the listforwards rpc command.
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Annotating the htlc in `listpeers` with their current status, and
which plugin is currently holding on to them with their
`htlc_accepted` hook can help us debug where plugins may go wrong.
Changelog-Added: jsonrpc: HTLCs in `listpeers` are now annotated with a status if they are waiting on an `htlc_accepted` hook of a plugin.
We set the timeout on first HTLC, but didn't clear it if that HTLC failed.
It's saner to have a per-HTLC timeout (since that's what it is!) and
also our timer infra is specially coded to scale approximately infinitely so
trying to optimize this is vastly premature.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: Protocol: We would sometimes gratuitously disconnect 30 seconds after an HTLC failed.
Still asserts that it's the standard size, but makes it a dynamic
member. For simpliciy, changes the parse_onionpacket API (it must be
a tal object now, so we might as well allocate it here to catch all
the callers).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Found in tests/test_connection.py::test_restart_many_payments:
`lightningd: outstanding taken(): lightningd/peer_htlcs.c:532:towire_temporary_channel_failure(((void *)0), ((void *)0))`
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This adds a `state_change` 'cause' to a channel.
A 'cause' is some initial 'reason' a channel was created or closed by:
/* Anything other than the reasons below. Should not happen. */
REASON_UNKNOWN,
/* Unconscious internal reasons, e.g. dev fail of a channel. */
REASON_LOCAL,
/* The operator or a plugin opened or closed a channel by intention. */
REASON_USER,
/* The remote closed or funded a channel with us by intention. */
REASON_REMOTE,
/* E.g. We need to close a channel because of bad signatures and such. */
REASON_PROTOCOL,
/* A channel was closed onchain, while we were offline. */
/* Note: This is very likely a conscious remote decision. */
REASON_ONCHAIN
If a 'cause' is known and a subsequent state change is made with
`REASON_UNKNOWN` the preceding cause will be used as reason, since a lot
(all `REASON_UNKNOWN`) state changes are a subsequent consequences of a prior
cause: local, user, remote, protocol or onchain.
Changelog-Added: Plugins: Channel closure resaon/cause to channel_state_changed notification
Great report from whitslack on this crash at startup:
```
2020-10-07T13:03:21.419Z **BROKEN** lightningd: FATAL SIGNAL 6 (version 0.9.1)
2020-10-07T13:03:21.419Z **BROKEN** lightningd: backtrace: common/daemon.c:51 (crashdump) 0x559fb67bcc76
2020-10-07T13:03:21.419Z **BROKEN** lightningd: backtrace: /var/tmp/portage/sys-libs/glibc-2.32-r2/work/glibc-2.32/signal/../sysdeps/unix/sysv/linux/x86_64/sigaction.c:0 ((null)) 0x7f61cdca8baf
2020-10-07T13:03:21.419Z **BROKEN** lightningd: backtrace: ../sysdeps/unix/sysv/linux/raise.c:50 (__GI_raise) 0x7f61cdca8b31
2020-10-07T13:03:21.419Z **BROKEN** lightningd: backtrace: /var/tmp/portage/sys-libs/glibc-2.32-r2/work/glibc-2.32/stdlib/abort.c:79 (__GI_abort) 0x7f61cdc92535
2020-10-07T13:03:21.419Z **BROKEN** lightningd: backtrace: /var/tmp/portage/sys-libs/glibc-2.32-r2/work/glibc-2.32/assert/assert.c:92 (__assert_fail_base) 0x7f61cdc9241e
2020-10-07T13:03:21.419Z **BROKEN** lightningd: backtrace: /var/tmp/portage/sys-libs/glibc-2.32-r2/work/glibc-2.32/assert/assert.c:101 (__GI___assert_fail) 0x7f61cdca1241
2020-10-07T13:03:21.419Z **BROKEN** lightningd: backtrace: lightningd/subd.c:750 (subd_send_msg) 0x559fb67a1c31
2020-10-07T13:03:21.419Z **BROKEN** lightningd: backtrace: lightningd/subd.c:745 (subd_send_msg) 0x559fb67a1c31
2020-10-07T13:03:21.419Z **BROKEN** lightningd: backtrace: lightningd/peer_htlcs.c:252 (local_fail_in_htlc) 0x559fb6798f77
2020-10-07T13:03:21.419Z **BROKEN** lightningd: backtrace: lightningd/peer_htlcs.c:1441 (onchain_failed_our_htlc) 0x559fb6798f77
2020-10-07T13:03:21.419Z **BROKEN** lightningd: backtrace: lightningd/onchain_control.c:339 (handle_missing_htlc_output) 0x559fb6786b9d
2020-10-07T13:03:21.419Z **BROKEN** lightningd: backtrace: lightningd/onchain_control.c:455 (onchain_msg) 0x559fb6786b9d
```
The problem is a channel with an onchaind can be in state FUNDING_STATE_SEEN,
because onchaind has started but not responded to init yet (which it does once it
has analyzed the commitment tx).
Channel B is onchain, and its onchaind fails the HTLC, and we try to send a msg
to channel A's onchaind as if it were channeld.
Explicitly check if it's channeld, rather than trying to see if it's onchaind.
Fixes: #4114
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: crash: assertion fail at restart when source and destination channels of an HTLC are both onchain.
This avoids overwriting the ones in git, and generally makes things neater.
We have convenience headers wire/peer_wire.h and wire/onion_wire.h to
avoid most #ifdefs: simply include those.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Note that other directories were explicitly depending on the generated
file, instead of relying on their (already existing) dependency on
$(LIGHTNINGD_HSM_CLIENT_OBJS), so we remove that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This means some files get renamed, and I took the opportunity to clarify
our naming (the *d* is important!)
1. channeld/channel_wire.csv -> channeld/channeld_wire.csv
2. channeld/gen_channel_wire.h -> channeld/channeld_wiregen.h
3. enum channel_wire_type -> enum channeld_wire
4. WIRE_CHANNEL_FUNDING_DEPTH -> WIRE_CHANNELD_FUNDING_DEPTH.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As per https://github.com/lightningnetwork/lightning-rfc/pull/785
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: config: the default CLTV expiry is now 34 blocks, and final expiry 18 blocks as per new BOLT recommendations.
This is best done by passing `struct bitcoin_signature` around instead
of raw signatures. We still save raw sigs to the db, and of course the
wire protocol uses them.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
