We need to stash/save the amount of the lease fees on a leased channel,
we do this by re-using the 'push' amount field on channel (which is
technically correct, since we're essentially pushing the fee amount to
the peer).
Also updates a bit of how the pushes are accounted for (pushed to now
has an event; their channel will open at zero but then they'll
immediately register a push event).
Leases fees are treated exactly the same as pushes, except labeled
differently.
Required adding a 'lease_fee' field to the inflights so we keep track of
the fee for the lease until the open happens.
This was measured as a 95th percentile in our rough testing, thanks to
all the volunteers who monitored my channels.
Fixes: #4761
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `setchannelfee` gives a grace period (`enforcedelay`) before rejecting old-fee payments: default 10 minutes.
This affects the range we offer even without quick-close, but it's
more critical for quick-close.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSONRPC: `close` now takes a `feerange` parameter to set min/max fee rates for mutual close.
We set the timeout on first HTLC, but didn't clear it if that HTLC failed.
It's saner to have a per-HTLC timeout (since that's what it is!) and
also our timer infra is specially coded to scale approximately infinitely so
trying to optimize this is vastly premature.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: Protocol: We would sometimes gratuitously disconnect 30 seconds after an HTLC failed.
This can result in us logging a warning if we've 1) dropped their sigs
response, 2) only us (the opener) added inputs, 3) and we broadcast on
their reconnect (when they retransmit their sigs)
Allows us to clean up an in-progress open that we won't be completing
Changelog-Added: EXPERIMENTAL JSON-RPC: Permit user-initiated aborting of in-progress opens. Only valid for not-yet-committed opens and RBF-attempts
We're going to move over to "unsaved channels" instead of using a
separate "uncommitted_channel" struct. This means a peer might have a
channel that's not saved to the database yet in its channel list
When the funding tx reaches depth, update the channel's data to the
"correct" funding transaction info from inflights (if necessary).
This will be necessary if:
- the transaction has been successfully RBF'd and
- the lesser fee transaction is the one successfully mined, OR
- the channel is in the process of being RBF'd
We need to know if they've sent us their sigs message yet. Ideally, we'd
be able to check the 'finalness' of the PSBT, however if the peer
doesn't have any inputs to the channel this doesn't work.
Since this all stays in dualopend/dual_open_control, we can hold
onto the openchannel_signed command to wait for a response here locally.
Previously we were splitting across the channeld/openingd boundary.
The previous onion_message code required a confirmed, not-shutting-down
channel, not just a connection. That's overkill; plus before widespread
adoption we will want to connect directly as a last resort.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This adds a `state_change` 'cause' to a channel.
A 'cause' is some initial 'reason' a channel was created or closed by:
/* Anything other than the reasons below. Should not happen. */
REASON_UNKNOWN,
/* Unconscious internal reasons, e.g. dev fail of a channel. */
REASON_LOCAL,
/* The operator or a plugin opened or closed a channel by intention. */
REASON_USER,
/* The remote closed or funded a channel with us by intention. */
REASON_REMOTE,
/* E.g. We need to close a channel because of bad signatures and such. */
REASON_PROTOCOL,
/* A channel was closed onchain, while we were offline. */
/* Note: This is very likely a conscious remote decision. */
REASON_ONCHAIN
If a 'cause' is known and a subsequent state change is made with
`REASON_UNKNOWN` the preceding cause will be used as reason, since a lot
(all `REASON_UNKNOWN`) state changes are a subsequent consequences of a prior
cause: local, user, remote, protocol or onchain.
Changelog-Added: Plugins: Channel closure resaon/cause to channel_state_changed notification
Prior to this patch update, we expected a client to call
`openchannel_signed` before checking for peer's tx-sigs messages on the
wire.
When moving to a 'multifundchannel' approach, we'll need to be able to
collect sigs from our peers before sending our tx_sigs message. There's
no strict ordering on when tx-sigs messages are sent/received, so this
is fine.
To do this, we go ahead and start up channeld as soon as
commitment_sigs are secured, so that we process incoming tx-sigs from
our peers as soon as we get them.
`openchannel_signed` and `openchannel_update` which allow a user to
continue a openchannel or kick off the completion of a openchannel.
`openchannel_update` should be called until it returns with
`commitments_secured`.
v2 channel open uses a different method to derive the channel_id, so now
we save it to the database so that we dont have to remember how to
derive it for each.
includes a migration for existing channels
We're going to want this for bolt13 formation as well.
As a result of reworking the logic into "candidate selection" then
"route hint selection", we need to change the way round-robin works.
We use a simple incrementing index now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is best done by passing `struct bitcoin_signature` around instead
of raw signatures. We still save raw sigs to the db, and of course the
wire protocol uses them.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Previously we've used the term 'funder' to refer to the peer
paying the fees for a transaction; v2 of openchannel will make
this no longer true. Instead we rename this to 'opener', or the
peer sending the 'open_channel' message, since this will be universally
true in a dual-funding world.
We have several of these, and they're not always called obvious things like
"delete" or "free". `STEALS` provides a strong hint here.
I only added it to a couple I knew about off the top of my head.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Even without optimization, it's faster to walk all the channels than
ping another daemon and wait for the response.
Changelog-Changed: Forwarding messages is now much faster (less inter-daemon traffic)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Instead of saving a stripped_update, we use the new
local_fail_in_htlc_needs_update.
One minor change: we return the more correct
towire_temporary_channel_failure when the node is still syncing.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I hadn't realized that lightningd asks gossipd every time we forward
a payment. But I'm going to abuse it here to get the latest channel_update,
otherwise (as lightningd takes over error message generation) lightningd
needs to do an async request at various painful points.
So have gossipd tell us the lastest update (stripped so compatible with
the strange in-onion-error format).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I was wondering why TAGS was missing some functions, and finally
tracked it down: PRINTF_FMT() confuses etags if it's at the start
of a function, and it ignores the rest of the file.
So we put PRINTF_FMT at the end, but that doesn't work for
*definitions*, only *declarations*. So we remove it from definitions
and add gratuitous declarations in the few static places.1
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Takes advantage of upfront-shutdown-script to permit users to
specify the close-to address for a channel at open, by adding
a `close_to` field to `fundchannel_start`.
Note that this only is in effect if `fundchannel_start` returns
with `close_to` set -- otherwise, peer doesn't
support `option_upfront_shutdown_script`.
`shutdown_scriptpubkey[REMOTE]` is original remote_shutdown_scriptpubkey;
`shutdown_scriptpubkey[LOCAL]` is the script used for "to-local" output when `close`. Add the default is generated form `final_key_idx`;
Store `shutdown_scriptpubkey[LOCAL]` into wallet;
