v2 of channel establishment, in the accpeter case, now sends 2 messages
to our peer after saving the information to disk (our commitment
signatures and our funding transaction signatures)
We're going to want this for bolt13 formation as well.
As a result of reworking the logic into "candidate selection" then
"route hint selection", we need to change the way round-robin works.
We use a simple incrementing index now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We create ALL_PROGRAMS, ALL_TEST_PROGRAMS, ALL_C_SOURCES and
ALL_C_HEADERS. Then the toplevel Makefile knows which are
autogenerated (by wildcard), so it can have all the rules to clean
them or check the source as necessary.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Note that other directories were explicitly depending on the generated
file, instead of relying on their (already existing) dependency on
$(LIGHTNINGD_HSM_CLIENT_OBJS), so we remove that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This means some files get renamed, and I took the opportunity to clarify
our naming (the *d* is important!)
1. channeld/channel_wire.csv -> channeld/channeld_wire.csv
2. channeld/gen_channel_wire.h -> channeld/channeld_wiregen.h
3. enum channel_wire_type -> enum channeld_wire
4. WIRE_CHANNEL_FUNDING_DEPTH -> WIRE_CHANNELD_FUNDING_DEPTH.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
HTLC fees increase (larger weight), and the fee paid by the opener
has to include the anchor outputs (i.e. 660 sats).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is what txsend does, only we have a psbt so we have
to change the db interface to take a wally_tx.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
On node start we replay onchaind's transactions from the database/from
our loaded htlc table. To keep things tidy, we shouldn't notify the
ledger about these, so we wrap pretty much everything in a flag that
tells us whether or not this is a replay.
There's a very small corner case where dust transactions will get missed
if the node crashes after the htlc has been added to the database but
before we've successfully notified onchaind about it.
Notably, most of the obtrusive updates to onchaind wrappings are due to
the fact that we record dust (ignored outputs) before we receive
confirmation of its confirmation.
I noticed the following in logs for tests/test_connection.py::test_feerate_stress:
```
DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-chan#1: Failing HTLC 18446744073709551615 due to peer death
DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-chan#1: local_routing_failure: 8194 (WIRE_TEMPORARY_NODE_FAILURE)
```
This is because it reports the (transient) node_failure error, because
our channel_failure message is incomplete. Fix this wart up.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Previously we've used the term 'funder' to refer to the peer
paying the fees for a transaction; v2 of openchannel will make
this no longer true. Instead we rename this to 'opener', or the
peer sending the 'open_channel' message, since this will be universally
true in a dual-funding world.
One is called on every plugin return, and tells us whether to continue;
the other is only called if every plugin says ok.
This works for things like payload replacement, where we need to process
the results from each plugin, not just the final one!
We should probably turn everything into a chained callback next
release.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
They callback must take ownership of the payload (almost all do, but
now it's explicit).
And since the payload and cb_arg arguments to plugin_hook_call_() are
always identical, make them a single parameter.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Note that it's channeld which calculates the shared secret, too. This
minimizes the work that lightningd has to do, at cost of passing this
through.
We also don't yet save the blinding field(s) to the database.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Use `LC_ALL=C sort` instead of `sort` so that mocks get sorted in
the same way on all developers' environments.
Re-record the result of `make update-mocks`.
Changelog-None
This is useful in general, but in particular it allows fundchannel to avoid YA
query to figure out if it can wumbo.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON: `connect` returns `features` of the connected peer on success.
Turns out that unnecessary: all callers can access the feature_set,
so make it much more like a normal primitive.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Unfortunately the invoice_payment_hook can give us a failcode, so I simply
restrict it to the two sensible ones.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-deprecated: plugins: invoice_payment_hook "failure_code" only handles simple cases now, use "failure_message".
Now that we have json_stream in common/, we can move all the related
helpers from lightningd/json to common/json. This way everyone can
benefit of them (including libplugin, the plugins themselves,
potentially lightning-cli), not lightningd alone!
Note that the Makefile of the common/test/ had to be modified, because
the new helpers make use of common/wireaddr... Which turns out to
\#include <lightingd/lightningd.h> ! So we couldnt just include the .c
and add mocks if we redefined some structs (hello run-param).
Before this patch we used `int` for error codes. The problem with
`int` is that we try to pass it to/from wire and the size of `int` is
not defined by the standard. So a sender with 4-byte `int` would write
4 bytes to the wire and a receiver with 2-byte `int` (for example) would
read just 2 bytes from the wire.
To resolve this:
* Introduce an error code type with a known size:
`typedef s32 errcode_t`.
* Change all error code macros to constants of type `errcode_t`.
Constants also play better with gdb - it would visualize the name of
the constant instead of the numeric value.
* Change all functions that take error codes to take the new type
`errcode_t` instead of `int`.
* Introduce towire / fromwire functions to send / receive the newly added
type `errcode_t` and use it instead of `towire_int()`.
In addition:
* Remove the now unneeded `towire_int()`.
* Replace a hardcoded error code `-2` with a new constant
`INVOICE_EXPIRED_DURING_WAIT` (903).
Changelog-Changed: The waitinvoice command would now return error code 903 to designate that the invoice expired during wait, instead of the previous -2
This command injects a custom message into the encrypted transport stream to
the peer, allowing users to build custom protocols on top of c-lightning
without requiring any changes to c-lightning itself.
This lets us do more flexible filtering in the next patch. But it also
keeps some weird logic out of gossipd.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is the final step: we pass the complete fee_states to and from
channeld.
Changelog-Fixed: "Bad commitment signature" closing channels when we sent back-to-back update_fee messages across multiple reconnects.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The invoice_try_pay code now takes a set, rather than a single htlc, but
it's basically the same thing.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a transient field, so rework things so we don't leave it in
struct htlc_out. Instead, load htlc_in first and connect htlc_out to
them as we go.
This also changes one place where we use it instead of the am_origin
flag.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We don't set the secret to compulsory (yet!) but put code in for the
future. Meanwhile, if there is a secret, check it is correct.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In a future version, we will use features to insist that payers
provide the secret. In transition, we may have old invoices which
didn't insist on that, so we need to know this on a per-invoice basis.
Not sure if I got the right syntax for adding an empty blob though!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This allows finegrained logging control of particular subdaemons or
subsystems.
To do this, we defer setting the logging levels for each log object
until after early argument parsing (since e.g. "bitcoind" log object
is created early).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-changed: Options: log-level can now specify different levels for different subsystems.
1. Printed form is always "[<nodeid>-]<prefix>: <string>"
2. "jcon fd %i" becomes "jsonrpc #%i".
3. "jsonrpc" log is only used once, and is removed.
4. "database" log prefix is use for db accesses.
5. "lightningd(%i)" becomes simply "lightningd" without the pid.
6. The "lightningd_" prefix is stripped from subd log prefixes, and pid removed.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-changed: Logging: formatting made uniform: [NODEID-]SUBSYSTEM: MESSAGE
Changelog-removed: `lightning_` prefixes removed from subdaemon names, including in listpeers `owner` field.
We had a separate logbook for each peer, and copy log entries above
the printable log level into the master logbook. This didn't always
work well, since we didn't dump it on crash for example.
Keep a single global logbook instead, and remove this infrastructure.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
