This adds a `state_change` 'cause' to a channel.
A 'cause' is some initial 'reason' a channel was created or closed by:
/* Anything other than the reasons below. Should not happen. */
REASON_UNKNOWN,
/* Unconscious internal reasons, e.g. dev fail of a channel. */
REASON_LOCAL,
/* The operator or a plugin opened or closed a channel by intention. */
REASON_USER,
/* The remote closed or funded a channel with us by intention. */
REASON_REMOTE,
/* E.g. We need to close a channel because of bad signatures and such. */
REASON_PROTOCOL,
/* A channel was closed onchain, while we were offline. */
/* Note: This is very likely a conscious remote decision. */
REASON_ONCHAIN
If a 'cause' is known and a subsequent state change is made with
`REASON_UNKNOWN` the preceding cause will be used as reason, since a lot
(all `REASON_UNKNOWN`) state changes are a subsequent consequences of a prior
cause: local, user, remote, protocol or onchain.
Changelog-Added: Plugins: Channel closure resaon/cause to channel_state_changed notification
v2 channel open uses a different method to derive the channel_id, so now
we save it to the database so that we dont have to remember how to
derive it for each.
includes a migration for existing channels
Changelog-Deprecated: plugin: `bcli` replacements should note that `sendrawtransaction` now has a second required Boolean argument, `allowhighfees`, which if `true`, means ignore any fee limits and just broadcast the transaction. Use `--deprecated-apis` to use older `bcli` replacement plugins that only support a single argument.
Note that other directories were explicitly depending on the generated
file, instead of relying on their (already existing) dependency on
$(LIGHTNINGD_HSM_CLIENT_OBJS), so we remove that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is what txsend does, only we have a psbt so we have
to change the db interface to take a wally_tx.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is the only place outside the wallet code where we create
a 'struct utxo', so it makes sense for us to move that logic inside
the wallet.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
For the moment it's a complete tx, but in future designs we might only
be given the specific input which closes the channel.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Previously we were annotating every movement with the blockheight of
lightningd at notification time. Which is lossy in terms of info, and
won't be helpful for reorg reconciliation. Here we switch over to
logging chain moves iff they've been confirmed.
Next PR will fix this up for withdrawals, which are currently tagged
with a blockheight of zero, since we log on successful send.
On node start we replay onchaind's transactions from the database/from
our loaded htlc table. To keep things tidy, we shouldn't notify the
ledger about these, so we wrap pretty much everything in a flag that
tells us whether or not this is a replay.
There's a very small corner case where dust transactions will get missed
if the node crashes after the htlc has been added to the database but
before we've successfully notified onchaind about it.
Notably, most of the obtrusive updates to onchaind wrappings are due to
the fact that we record dust (ignored outputs) before we receive
confirmation of its confirmation.
These are incoming from onchaind, so the result of any transactions
we've created or outputs we own as a result of a channel closure. These
go into the 'wallet' account.
Previously we've used the term 'funder' to refer to the peer
paying the fees for a transaction; v2 of openchannel will make
this no longer true. Instead we rename this to 'opener', or the
peer sending the 'open_channel' message, since this will be universally
true in a dual-funding world.
This allows us to set more fine-grained feerate for onchain resolution.
We still give it the same feerate for all types, but this will change as
we move feerates to bcli.
Command format: close id [unilateraltimeout] [destination]
Close the channel with peer {id}, forcing a unilateral
close after {unilateraltimeout} seconds if non-zero, and
the to-local output will be sent to {destination}. If
{destination} isn't specified, the default is the address
of lightningd.
Also change the pylightning:
update the `close` API to support `destination` parameter
`shutdown_scriptpubkey[REMOTE]` is original remote_shutdown_scriptpubkey;
`shutdown_scriptpubkey[LOCAL]` is the script used for "to-local" output when `close`. Add the default is generated form `final_key_idx`;
Store `shutdown_scriptpubkey[LOCAL]` into wallet;
Currently the only source for amount_asset is the value getter on a tx output,
and we don't hand it too far around (mainly ignoring it if it isn't the
chain's main currency). Eventually we could bubble them up to the wallet, use
them to select outputs or actually support assets in the channels.
Since we don't hand them around too widely I thought it was ok for them to be
pass-by-value rather than having to allocate them and pass them around by
reference. They're just 41 bytes currently so the overhead should be ok.
Signed-off-by: Christian Decker <@cdecker>
We now have a pointer to chainparams, that fails valgrind if we do anything
chain-specific before setting it.
Suggested-by: Rusty Russell <@rustyrussell>
Turns out that if we have the init message contain both the chainparams as
well as a transaction that needs to be parsed we need to set the parser to
elements mode before we reach the transaction...
This is the other origin, besides `bitcoin_tx`, where we create `bitcoin_tx`
instances, so add the context as soon as possible. Sadly I can't weave the
chainparams into the deserialization code since that'd need to change all the
generated wire code as well.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
The spec says to close the channel if they send us an error, but we
need to be more lenient to preserve channels with other
implementations.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There's only one caller which used the flag.
As a side-effect, now we'll try reconnect even if the previous owner
was NULL (which mainly effects the case where we couldn't create the subd).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I was working on rewriting our (somewhat chaotic) tx watching code
for 0.7.2, when I found this bug: we don't always notice the funding
tx in corner cases where more than one block is detected at
once.
This is just the one commit needed to fix the problem: it has some
unnecessary changes, but I'd prefer not to diverge too far from my
cleanup-txwatch branch.
Fixes: #2352
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is important for things we automatically watched because it spends a
watch txo, but only onchaind knows the details about what the TX really is and
how it should be handled.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Encapsulating the peer state was a win for lightningd; not surprisingly,
it's even more of a win for the other daemons, especially as we want
to add a little gossip information.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
These are always handed to subdaemons as a set, so group them. This makes
it easier to add an fd (in the next patch).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
onchaind is in the correct position to tell us about them, so have it pass
them up as well.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
In order to avoid having to ask the HSM for public keys to
their_unilateral/to_us outputs we just store the `scriptPubkey` with the UTXO,
which can then be converted to the P2WPKH address.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We need to do it in various places, but we shouldn't do it lightly:
the primitives are there to help us get overflow handling correct.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
