Update gossip routiens and various other hecks on the channel state to consider AWAITING_SPLICE to be routable and treated similar to CHANNELD_NORMAL.
Small updates to psbt interface
Changelog-None
- adopt "const <type> *"convention
- remove use_shadow option for some pyln tests
- show prob. information of flows into paynotes
- show prob. of success of entire payment flow in paynotes
- minflow: We were not releasing the memory of flow arrays when replacing
them with a new canditate.
- use memleak_scan_obj in memleak_check
- replace u64 with size_t
Signed-off-by: Lagrang3 <eduardo.quintana@pm.me>
The global is an *internal* hack because dijkstra_item_mover doesn't
take a context arg! It should be used with care.
Easy, since all the accessors exist: we just hand in the struct dijkstra.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
- remove internal gheap checks
- add check for arc_t.chanidx overflow
- remove outdated comments
- check the delta flow bounds before augmenting along a path
- get_flow_paths uses a dynamic tal array instead of a list.
- fix a unit test that depended on the order of returned flows
- fix bug: lightnind doesn't like if I reuse the partid of a failed
flow, therefore use a higher partid than any of the previous attempts.
- plugin_err instead of LOG_BROKEN if sendpay fails and we cannot get a
an error code.
- fix wrong comments.
- remove the background timer.
- This is a bugfix. Previous to this the MCF network was built using the
knowledge of the min and max liquidity but it didn't take into account
pending HTLCs.
- Also remove the min_prob_success option but hardcode a 90% value.
Removing some options that are not relevant to the user, they're kept
for developer mode only:
- base_fee_penalty
- min_prob_success
- prob_cost_factor
- remove heap.h, not used
Signed-off-by: Lagrang3 <eduardo.quintana@pm.me>
This way unreserving the PSBT will work as intended, and we don't have
to keep track of how many times we've called reserved for any one input.
Technically we're supposed to not reserve inputs at *all* while doing
opens, this moves us slightly closer to that.
The alias may not be set for non-alias channels after they
confirm. The other branch is safe because we only consider active
channels.
Changelog-None
Fixes#6450
Caught by leak detection, we just re-assigned this when we retried: sure,
it's temporary, but it's technically a leak.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I shut down bitcoind during a test, and bcli leak reports flooded in.
They're all temporary, but this fixes them.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is the simplest solution, not the best, but there's significant risk in try to remove the "we have a path" assumption in the code pay code.
Includes removing a `tal_steal` which was incorrect: the buffer has the same lifetime as the plugin, so if we steal it then things get messy when we free the struct payment.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Plugins: `pay` will now pay your own invoices if you try.
This means (temporarily) that blacklisting won't work (fix later), and
means that old-style (commando.py) master-secret-override doesn't work.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Removed: Plugins: `commando` no longer allows datastore ['commando', 'secret'] to override master secret (re-issue runes if you were using that!).
In preparation for going async:
1. Split try_command's tail into a new function called execute_command() after
the rune checks have succeeded.
2. Put all the info execute_command() needs into struct cond_info, to make it
a simple callback style.
So we create new_cond_info() which dynamically allocates `struct cond_info`
and sets the destructor.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We would create a `struct commando` to marshal our incoming messages,
then try_command would create a *new* one. We can simply reuse, but
when I did I noticed a trick: the new one was not in the `incomings`
array, so didn't work towards the ratelimit. So we need to remove it
from `incomings` in `try_command`, but at least it's now explicit.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We used to activate on the first rune creation, but we're no longer in charge
of runes, so we can't make that call.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Debugging a number of payments showed that we sometimes waste a number
of attempts routing through a channel via its alias, rather than its
scid. This is because while we annotate the scid when it has been set,
we do not do so for the alias. The alias then is picked for routing
despite not having enough capacity, failing the attempt locally.
It can also happen that we alternate between scid and alias, doubling
the number of failed attempts before we can make progress.
This patch sets the hint for the alias to a capacity of 0 and disables
it as if the peer were offline. This means when available we'll always
use the scid, which is also far easier to read in the logs.
Changelog-Fixed: pay: We now track spendable amounts when routing on both the local alias as well as the short channel ID
The presplitter modifier would split a payment before trying the first
attempt based on some common sizes. Its goal was to have smaller parts
in flight over different paths, in order to make it more difficult for
a forwarding node to learn payment amount. However it was causing some
issues for direct payments, and estimates on spendable amounts which
considers only the first HTLC being added, but presplitter would
always cause multiple HTLCs to be kicked off, causing the estimate to
be off.
Removing the presplitter fixes this, making draining channels easier,
and worse success rates, due to more HTLCs in flight directly
impacting the changes of getting stuck.
Changelog-Removed: pay: `pay` no longer splits based on common size, as it was causing issues in various scenarios.
This is almost always true already; fix up the few non-standard ones.
This is enforced with an assert, and I ran the entire test suite to
double-check.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Previously, our code checked for the presence of the `lightning:`
prefix while decoding a bolt11 string. Although this prefix is valid
and accepted by the core lightning pay command, it was causing issues
with how we managed invoices. Specifically, we were skipping the prefix
when creating a copy of the invoice string and storing the raw invoice
(including the prefix) in the database, which caused inconsistencies
in the user experience.
To address this issue, we need to strip the `lightning:` prefix before
calling each core lightning command. In addition, we should
modify the invstring inside the db with the canonical one.
This commit fixes the issue by stripping the `lightning:` prefix
from the `listsendpays` function, which will improve the
user experience and ensure consistency in our invoice management (see
next commit).
Reported-by: @johngribbin
Link: ElementsProject#6207
Fixes: debbdc0
Changelog-Fixes: trim the `lightning:` prefix from invoice everywhere.
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
We usually have access to `ld`, so avoid the global.
The only place generic code needs it is for the json command struct,
and that already has accessors: add one for libplugin and lightningd
to tell it if deprecated apis are OK.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This avoids the mess where we override db_fatal for teqsts, and keeps it
generic.
Also allows us to get rid of one #if DEVELOPER, and an ugly global for
bookkeeper.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If we're opening a channel with a peer which support anchors (and
we do), we tell fundpsbt/utxopsbt to enforce the emergency reserve;
this matters, as it doesn't know about the channel yet, and thus
won't (if it's our first anchor channel).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `fundchannel` and `multifundchannel` will refuse to spend funds below `min-emergency-msat` if we have any anchor channels (or are opening one).
This was added to fundpsbt/utxopsbt in v0.10, but the spender plugin
didn't take advantage of it, instead calculating its own change amount
and output.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This was added to fundpsbt/utxopsbt in v0.10, but the txprepare plugin
didn't take advantage of it, instead calculating its own change amount
and output.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We were marking our inputs very late, which means any early failure
would not know to unreserve them.
This becomes particularly bad when we start enforcing emergency reserves.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
