"Who needs specs?" FFS...
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: `keysend` will now attach the longest valid text field in the onion to the invoice (so you can have Sphinx.chat users spam you!)
we weren't making records for 'missed' accounts that had a zero balance
at snapshot time (if peer opens channel and is unused)
Fixes: #5502
Reported-By: https://github.com/niftynei/cln-logmaid
Again, we should use the real channel_type, but we approximate.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: private channels will only route using short-channel-ids if channel opened with option_scid_alias-supporting peer.
We *should* remember the channel type, since this is only required
if they set the channel_type to include option_scid_alias.
However, since we support channel upgrade, channel_type really needs
a new table. I have a patch for that, from my abandoned original
"fastopen" branch for aliases, but it's too big a chance for rc2 IMHO.
Meanwhile, we allow exposeprivatechannels's scids to be either real or
the aliases.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: invoice routehints will use fake short-channel-ids for private channels if channel opened with option_scid_alias-supporting peer.
So we print out invoice fees on the same line for those CSVs! This means
we have to do a little bit of gymnastics (but not too bad):
- we save the fee amount onto the income event now so we can use
it later
- we ignore every "invoice_fee" event for the koinly/cointracker
Note that since we're not skipping income events in the loops we also
move the newline character to the start of every `_entry` function so
skipped records dont incur empth lines.
Changelog-Added: bkpr: print out invoice fees on the same line for `koinly` and `cointracker` csv types
Adds schema definitions and manpages for bkpr- commands; also renames
the commands to all start with 'bkpr-', so they're easier to identify/
make runes about.
For income events, break out the amount paid in routing fees vs the
total amount of the *invoice* that is paid.
Also printout these fees, when available, on listaccountevents
Since it's a deprecation, we simply ignore one, rather than properly
checking they match etc.
Fixes: #5386
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We deprecated msatoshi, but getroute() still returns both (unless
--allow-deprecated-apis=False), so we need to accept both.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There's one case where we can present more infomation, so do that, and
fix documentation.
Changelog-Added: JSON-RPC: `listforwards` now shows `out_channel` in more cases: even if it couldn't actually send to it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: #5329
1. We set an outgoing htlc's `failonion` when we get a commitment_signed.
2. We don't transfer it to the corresponding incoming HTLC until we send
commitment_signed and receive revoke_and_ack (meaning, outgoing htlc is
completely dead).
3. If between these steps we go onchain, onchaind (after 3 blocks) tells us
to fail the HTLC.
4. hout->failonion is set, but hout->hin has not been failed yet. We
do a sanity check and print a nasty message, and fail it with
WIRE_PERMANENT_CHANNEL_FAILURE instead of relaying the error.
So handle this case explicitly.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We assumed that if the outgoing htlc has failed, we should have always
failed the incoming one. This is not true, as this testcase demonstrates:
```
lightningd-2: 2022-05-25T04:38:31.449Z DEBUG 035d2b1192dfba134e10e540875d366ebc8bc353d5aa766b80c090b39c3a5d885d-onchaind-chan#2: Sending 1 missing htlc messages
lightningd-2: 2022-05-25T04:38:31.449Z DEBUG 035d2b1192dfba134e10e540875d366ebc8bc353d5aa766b80c090b39c3a5d885d-chan#2: onchain_failed_our_htlc
lightningd-2: 2022-05-25T04:38:31.449Z DEBUG 035d2b1192dfba134e10e540875d366ebc8bc353d5aa766b80c090b39c3a5d885d-chan#2: HTLC id 0 failonion = 0x55cb8bc045d8, failmsg = (nil), preimage = (nil)
lightningd-2: 2022-05-25T04:38:31.449Z **BROKEN** 035d2b1192dfba134e10e540875d366ebc8bc353d5aa766b80c090b39c3a5d885d-chan#2: HTLC id 0 already complete, but ->in not resolved! failonion = 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, failmsg = (null), preimage = (null)
lightningd-2: 2022-05-25T04:38:31.449Z **BROKEN** 035d2b1192dfba134e10e540875d366ebc8bc353d5aa766b80c090b39c3a5d885d-chan#2: MISSING incoming fail for 0: failing incoming now
lightningd-2: 2022-05-25T04:38:31.449Z **BROKEN** 0266e4598d1d3c415f572a8488830b60f7e744ed9235eb0b1ba93283b315c03518-chan#1: MISSED incoming fail for 0: failing now
lightningd-2: 2022-05-25T04:38:31.449Z DEBUG 0266e4598d1d3c415f572a8488830b60f7e744ed9235eb0b1ba93283b315c03518-chan#1: HTLC in 0 RCVD_ADD_ACK_REVOCATION->SENT_REMOVE_HTLC
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We can sneak the HTLC add in before we do the update_fee which fails:
```
# the channel should start warning -- too much dust
inv = l2.rpc.invoice(htlc_val_msat, str(num_dusty_htlcs + 1), str(num_dusty_htlcs + 1))
with pytest.raises(RpcError, match=r'WIRE_TEMPORARY_CHANNEL_FAILURE'):
> l1.rpc.sendpay(route, inv['payment_hash'], payment_secret=inv['payment_secret'])
E Failed: DID NOT RAISE <class 'pyln.client.lightning.RpcError'>
tests/test_pay.py:2654: Failed
```
From the logs:
```
lightningd-1: 2022-05-20T02:16:40.008Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-channeld-chan#1: NEW:: HTLC LOCAL 14 = SENT_ADD_HTLC/RCVD_ADD_HTLC
lightningd-1: 2022-05-20T02:16:40.010Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-channeld-chan#1: Adding HTLC 14 amount=10000000msat cltv=113 gave CHANNEL_ERR_ADD_OK
lightningd-1: 2022-05-20T02:16:40.012Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-channeld-chan#1: peer_out WIRE_UPDATE_ADD_HTLC
lightningd-1: 2022-05-20T02:16:40.015Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-channeld-chan#1: REPLY WIRE_CHANNELD_OFFER_HTLC_REPLY with 0 fds
lightningd-1: 2022-05-20T02:16:40.026Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-channeld-chan#1: peer_out WIRE_WARNING
lightningd-1: 2022-05-20T02:16:40.029Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-channeld-chan#1: billboard perm: Too much dust to update fee (Desired feerate update 20000)
lightningd-1: 2022-05-20T02:16:40.035Z INFO 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-chan#1: Peer transient failure in CHANNELD_NORMAL: channeld WARNING: Too much dust to update fee (Desired feerate update 20000)
lightningd-1: 2022-05-20T02:16:40.039Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-lightningd: Will try reconnect in 60 seconds
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Over time, it has cost us more developer cycles than it has gained.
It has hidden intermittant bugs, and allowed cruft to accumulate:
when we eventually tried to figure out what was going wrong, the
actual change which caused it was now stale and forgotten.
This was a particular bane during the connectd rewrite, and I
worked through some issues which had occurred before, but were not
more likely.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This changes many fields: in non-deprecated mode, they're now raw integers.
This was always the intention, but the transition was never completed.
Suggested-By: @ShahanaFarooqui
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: "_msat" fields can be raw numbers, not "123msat" strings (please handle both!)
Changelog-Deprecated: JSON-RPC: "_msat" fields as "123msat" strings (will be only numbers)
We should be using amount_msat always. Many tests were not. Plus,
deprecating it simplifies the code.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: JSONRPC: `sendpay` `route` elements `msatoshi` (use `amount_msat`)
The name in the spec is `msat`, but I don't want to make an API exception.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `fetchinvoice` `changes` `amount_msat`
Changelog-Deprecated: JSON-RPC: `fetchinvoice` `changes` `msat` (use `amount_msat`)
This is consistent with our output changes, and increases consistency.
It also keeps future sanity checks happy, that we only use JSON msat
helpers with '_msat' fields.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `invoice`, `sendonion`, `sendpay`, `pay`, `keysend`, `fetchinvoice`, `sendinvoice`: `msatoshi` argument is now called `amount_msat` to match other fields.
Changelog-Deprecated: JSON-RPC: `invoice`, `sendonion`, `sendpay`, `pay`, `keysend`, `fetchinvoice`, `sendinvoice` `msatoshi` (use `amount_msat`)
We had json_add_amount_msat_only(), which was designed to be used to
print out msat fields, if we had sats.
However, we misused it, so split it into the three different cases:
1. json_add_amount_sat_msat: We are using it correctly, with a field called
xxx_msat.
2. json_add_amount_sats_deprecated: We were using it wrong, so deprecate
the old field and create a new one which does end in _msat.
3. json_add_sats: we were using it to hand sats as a JSON parameter to an
interface, where "XXXsat".
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: Plugins: `rbf_channel` and `openchannel2` hooks `their_funding` (use `their_funding_msat`)
Changelog-Deprecated: Plugins: `openchannel2` hook `dust_limit_satoshis` (use `dust_limit_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `funding_satoshis` (use `funding_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `dust_limit_satoshis` (use `dust_limit_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `channel_reserve_satoshis` (use `channel_reserve_msat`)
Changelog-Deprecated: Plugins: `channel_opened` notification `amount` (use `funding_msat`)
Changelog-Deprecated: JSON-RPC: `listtransactions` `msat` (use `amount_msat`)
Changelog-Deprecated: Plugins: `htlc_accepted` `forward_amount` (use `forward_msat`)
We were setting it on the root, but that doesn't get handed to
sendpay. Our schema doesn't *require* bolt11, either, so this was
missed (there could be a *bolt12* instead).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: JSON-RPC: `listpays` always includes `bolt11` or `bolt12` field.
This is what LND does, and it's better for upper layers than trying to
twist our maxfeepercent / exemptfee heuristics to suit.
(I don't remember who complained about this, sorry!)
I'm doing this now because I want to add YA parameter next!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `pay` has new parameter `maxfee` for setting absolute fee (instead of using `maxfeepercent` and/or `exemptfee`)
I think the new pay command has proven itself in the last 18 months!
Also various pay tests took "compat" then didn't use it, so clean them
up.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Removed: JSON-RPC: `legacypay` (`pay` replaced it in 0.9.0).
Trips on our RPC checking introduced at the same time: msat should be
an integer or an "xxxmsat"/sat/btc string.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Suggested-by: @t-bast
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `listforwards` has new entry `style`, currently "legacy" or "tlv".
Partial revert of 43a833e405
"lightningd: remove support for legacy onion format."; we restore the
ability to decode legacy onions for forwarding, but not to generate them.
(We don't accept them properly since making payment_secret compulsory
anyway, so no real change there!)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Removed: Protocol: ... but we still forward legacy HTLC onions for now.
Using a canned sendonion call from an old version (v0.10.2), where I
forced it to use legacy onion for l2.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is the part which works: we have another old PR (or simply
uncomment the FIXME section) for the routehint case.
Closes: #4781
See-also: #4808
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I removed these prematurely: we *haven't* had a release since
introducing them!
This consists of reverting d15d629b8b
"plugins/fetchinvoice: remove obsolete string-based API." and
plugins/fetchinvoice: remove obsolete string-based
API. "onion_messages: remove obs2 support."
Some minor changes due to updated fromwire_tlv API since they
were removed, but not much.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: REVERT: Removed backwards compat with onion messages from v0.10.1.
