This doesn't have an effect now (except in experimental mode), but it
will when we support anchors. So we deprecate the use of those in the
close command too.
For experimental mode we have to avoid using p2pkh; adapt that test.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: JSON-RPC: `shutdown` no longer allows p2pkh or p2sh addresses.
Suggested-by: @t-bast
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `listforwards` has new entry `style`, currently "legacy" or "tlv".
Means that field is now optional in JSON output.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `delinvoice` has a new parameter `desconly` to remove description.
LNURL wants this so they can include images etc in descriptions.
Replaces: #4892
Changelog-Added: JSON-RPC: `invoice` has a new parameter `deschashonly` to put hash of description in bolt11.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We keep the parameter around for future use (e.g. PTLC support?), but clboss
master still sets 'style' to "legacy". Accept, but ignore it.
Reported-by: grubman on #c-lightning (IRC)
Changelog-Deprecated: JSON-RPC: `sendpay` `route` argument `style` "legacy" (don't use it at all, we ignore it now and always use "tlv" anyway).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Suggested by @m-schmook, I realized that if we append it later I'll
never get it right: I expect parameters min and max, not max and min!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: you can now alter the `htlc_minimum_msat` and `htlc_maximum_msat` your node advertizes.
Based on setchannelfee, but expanded to allow setting max htlc amount (and others
in future?).
The main differences:
1. It doesn't change values which are not specified (that would be hard to
add fields to!)
2. It says exactly what all values are in any potentially changed channels.
Changelog-Added: JSON-RPC: new `setchannel` command generalizes `setchannelfee`.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is htlc_maximum_msat in BOLT 7 speak, but this name matches our existing
fields and is clearer in this context.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's a low-level interface now, expecting you to build your own TLVs.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Reported-by: @valentinewallace
Update TOR.md
Update tor install to represent current systemd syntax for enabling and starting a new system service
Corrected a typo. After tor is installed to refresh /etc/tor/torrc config changes the command should be 'sudo systemctl restart tor' not 'sudo systemctl start tor'
Having a list of very targeted suppressions allows us to still run the
majority of tests with valgrind checking, and not fail when Rust does
some trickery. This is for example the case with `std::sync::Once`
which uses `num_procs` calling out to the cgroups subsystem, sometimes
with a null path.
Suggested-by: Rusty Russell <@rustyrussell>
Useful for accounting for missed/historical channel opens, to figure out
what the actual sat contribution from each peer is at a utxo level
Changelog-Added: JSONRPC: `listpeers` now includes a `pushed_msat` value. For leased channels, is the total lease_fee.
Changelog-Experimental: option `--lease-fee-base-msat` renamed to `--lease-fee-base-sat`
Changelog-Experimental: option `--lease-fee-base-msat` deprecated and will be removed next release
All build flags and (experimental) options make it hard to find
out what features are supported or enabled.
And the undocumented `--list-features-only`, does not account for all
our featurebits, for example bit 55 (keysend).
Changelog-Added: JSON-RPC: `getinfo` result now includes `our_features` (bits) for various Bolt #9 contexts
I've tried automatically parsing the docs, and these inconsistencies made it harder to do that.
(I tried to do that for a project which I can't share yet, I'm not sure if it'll even work).
The blockheight is zero though, since these aren't included in a block
yet.
We also don't issue an 'external' deposit event if we can tell that the
address you're sending to actually belongs to our wallet (we'll issue a
deposit event when it gets included in a block)
If a coin move concerns an external account, it's really useful to know
which 'internal' account initiated the transfer.
We're about to add a notification for withdrawals, so we can use this to
track wallet pushes to outside addresses
Changelog-Added: JSONRPC: `coin_movement` to 'external' accounts now include an 'originating_account' field
Fire off a snapshot of current account balances (node wallet + every
'active' channel) after we've caught up to the chain tip for the *first*
time (in other words, on start).
We record the amount of fees collected for a routed payment. For
simplicity's sake on the data agg side, we record the fee payment on
*BOTH* the incoming htlc and the outgoing htlc. Note that this results
in double counting if you add up the fees from both an in-routed and
out-routed payment.
Get rid of the 'movement_idx', since we replay events now.
Since we're removing a field from the 'coin_movement' event emission, we
bump the version type.
Changelog-Updated: `coin_movements` events have been revamped and are now on version 2.
Don't do this on every build, it takes 4 seconds. And split it
into individual targets, so make can parallelize (1.6 seconds here).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is from 6e99c5feaf60cb797507d181fe583224309318e9
We renamed the enctlv field to encrypted_recipient_data in the spec, and the
new onion_message is message 513. We don't handle it until the next patch.
Two renames:
1. blinding_seed -> blinding_point.
2. enctlv -> encrypted_recipient_data.
We don't do a compat cycle for our JSON APIs for these experimental
features only used by our own plugins, we just rename.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Temporarily disable sendpay_blinding test which uses obsolete onionmsg;
there's still some debate on the PR about how blinded HTLCs will work.
Changelog-EXPERIMENTAL: onionmessage: removed support for v0.10.1 onion messages.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: #4785Fixes: #4883
Changelog-Changed: Plugins: `shutdown` notification is now send when lightningd is almost completely shutdown, RPC calls then fail with error code -5.
This include the following commits:
- review 1/2: move from tab to space, and remove the exp. prop from doc;
- review 2/2: remove experimental features;
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
I noticed that `wallet/db_postgres.c` never actually calls `db_changes_add`.
PostgreSQL arguably has a better replication system (a PostgreSQL cluster)
than what `db_write` hook can offer, so rather than make `db_write` work on
PostgreSQL, just document that it does not actually work there.
ChangeLog-none
ChangeLog-Added: With the `sqlite3://` scheme for `--wallet` option, you can now specify a second file path for real-time database backup by separating it from the main file path with a `:` character.
autotor is older, but statictor is better. Your options are really
"use HiddenServiceDir in torrc" vs "use statictor", with the issue
that statictor requires you to configure Tor for control access by
c-lightning.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
mrkd doesn't like non-ASCII characters in ubuntu:18.04, used for
repro-builds. This is the easiest way to sidestep this issue until we
deprecate the old ubuntu version.
To reduce the surface area of amount of a channel balance that can be
eaten up as htlc dust, we introduce a new config
'--max-dust-htlc-exposure-msat', which sets the max amount that any
channel's balance can be added as dust
Changelog-Added: config: new option --max-dust-htlc-exposure-msat, which limits the total amount of sats to be allowed as dust on a channel
It's probably not worth fixing for the other daemons.
Changelog-Changed: JSON-RPC: `ping` now only works if we have a channel with the peer.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We keep the now-removed chains field, and in deprecated mode, we set it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: bolt12: `chains` in invoice_request and invoice is deprecated, `chain` is used instead.
Main changes are:
1. Uses point32 instead of pubkey32.
2. Uses issuer instead of vendor.
3. Uses byte instead of u8.
4. blinded_path num_hops is now a byte, not u16 (we don't use that yet!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: bolt12: `vendor` is deprecated: the field is now called `issuer`.
This adds a new hook: onion_message_ourpath for when we know a message
came in via a blinded path we created. The onion_message_blinded hook
is now called for all other messages, since all messages are now
blinded.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is required for the setuptools_scm package to correctly identify
the root of the git repository when installing from the
requirements.txt file in the root. It'd otherwise copy the source
directory, which doesn't yet include the version metadata, into a
separate directory and the building from there, which breaks the
git lookup.
`in-tree-build` is the future default, so we'll eventually be able to
strip that option again. See [1] for details.
[1] https://github.com/pypa/pip/issues/7555
This was measured as a 95th percentile in our rough testing, thanks to
all the volunteers who monitored my channels.
Fixes: #4761
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `setchannelfee` gives a grace period (`enforcedelay`) before rejecting old-fee payments: default 10 minutes.
By popular merge-hell demand.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Build: Python is now required to build, as generated files are no longer checked into the repository.
