And rename them so they're not cleared by `make clean`. We leave the
old rules in place so old files get cleaned still.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We create ALL_PROGRAMS, ALL_TEST_PROGRAMS, ALL_C_SOURCES and
ALL_C_HEADERS. Then the toplevel Makefile knows which are
autogenerated (by wildcard), so it can have all the rules to clean
them or check the source as necessary.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: build: On some operating systems the postgresql library would not get picked up. `./configure` now uses `pg_config` to locate the headers.
Note that other directories were explicitly depending on the generated
file, instead of relying on their (already existing) dependency on
$(LIGHTNINGD_HSM_CLIENT_OBJS), so we remove that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This means some files get renamed, and I took the opportunity to clarify
our naming (the *d* is important!)
1. channeld/channel_wire.csv -> channeld/channeld_wire.csv
2. channeld/gen_channel_wire.h -> channeld/channeld_wiregen.h
3. enum channel_wire_type -> enum channeld_wire
4. WIRE_CHANNEL_FUNDING_DEPTH -> WIRE_CHANNELD_FUNDING_DEPTH.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Otherwise valgrind gets upset when we *run* the statements: better
to get a backtrace when we bind, so we can tell which field it is!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We've never hit this, we do check them on insert, and it's slowing
down some operations unnecessarily.
$ time lightning-cli -R --network=regtest --lightning-dir /tmp/ltests-k8jhvtty/test_pay_stress_1/lightning-1/ listpays > /dev/null
Before:
real 0m1.781s
user 0m0.127s
sys 0m0.013s
After:
real 0m1.545s
user 0m0.124s
sys 0m0.024s
Also, the raw listsendpays drops from 0.983s to 0.676s.
(With -O3 -flto, listsendpays is 0.416s, listpays 0.971s).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is an extra safety check for dual funding, where we only want to sign
the inputs we provided!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `signpsbt` takes an optional `signonly` array to limit what inputs to sign.
Required for dual funding where the opener sets it.
Changelog-Added: JSON-RPC: `fundpsbt` takes a new `locktime` parameter
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This more closely mirrors fundpsbt (which will only select unreserved ones)
but you can turn it off if you want to e.g. rbf in future.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: New low-level command `utxopsbt` to create PSBT from existing utxos.
It's *possible* to do this using various RPC calls, but it's
unfriendly:
1. Call getinfo to get the current block height.
2. Call listfunds to map the UTXOs.
3. Create the PSBT and hope you get all the fields correct.
Instead, this presents an interface just like `fundpsbt`, with identical
returns.
I think it's different enough to justify a new command (though it
shares much internally, of course).
In particular, it's now quite simple to create a command which uses
specified utxos, and then adds more to meet any shortfall.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We need to remember this in the db (it's a P2WSH for option_anchor_outputs),
and we need to set nSequence to 1 to spend it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is best done by passing `struct bitcoin_signature` around instead
of raw signatures. We still save raw sigs to the db, and of course the
wire protocol uses them.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
HTLC fees increase (larger weight), and the fee paid by the opener
has to include the anchor outputs (i.e. 660 sats).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is the same way we handle option_static_remotekey, which
is also sticky (if negotiated at opening time, it always applies).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
You'd need this if you ever wanted to make your own PSBT.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: `listfunds` now has a `redeemscript` field for p2sh-wrapped outputs.
This is what txsend does, only we have a psbt so we have
to change the db interface to take a wally_tx.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It keeps multiple different variables around the loop, but a simple
"are we done yet?" helper makes this clearer and reduces special
cases or all-vs-target.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Includes:
psbt: Use renamed functions for new wally version
psbt: Set the transaction directly to avoid script workarounds
psbt: Use low-S grinding when computing signatures
tx: Use wally_tx_clone from libwally now that its exported
Signed-off-by: Jon Griffiths <jon_p_griffiths@yahoo.com>
the way we use PSBTs to sign things requires that we have the
scriptpubkey available on the utxo so we can populate the witness-utxo
field with it.
this causes problems if we don't already have the scriptpubkey cached in
the database, as in *some* cases we require a round trip to the HSM to
populate them
to get over this hump, we backfill any and all missing scriptpubkey
information for the utxo's that we hold in our wallet.
this will allow us to clean up the NULL handling of missing
scriptpubkeys.
we're about to add a migration that requires access to the bip32_key
in order to calculate missing scriptpubkeys.
prior to this patch, we don't have access to the bip32 key in the db
migration, as it's set on the wallet but after the db migrations are
run.
here we patch it through so that every migration can access it
fundpsbt forces the caller to manually add their weight * feerate
to the satoshis they ask for. That means no named feerates.
Instead, create a startweight parameter and do the calc for them
internally, and return the feerate we used (and, while we're at it,
the estimated final weight).
This API change is best done now, as it would otherwise have to
be appended as a parameter.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We're actually going to deprecate this, so don't add new features!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: ***REMOVE*** JSON-API: `txprepare` returns a psbt version of the created transaction
Technically, they could do this themselves, but it's much nicer to have one
place to do it (and it makes sure we get the required information into the
PSBT, which is actually not entirely accessible through listfunds, as that
doesn't want to consult with the HSM for close outputs).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON RPC: new low-level coin selection `fundpsbt` routine.
This is the normal case: you only want to reserve inputs which
are not already reserved. This saves you iterating through the
results and unreserving some if you weren't exclusive.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
reserveinputs marks UTXOs reserved for 12 hours, so we won't select them
for spending: unreserveinputs marks them available again.
Exposes param_psbt() for wider use.
Disabled the test_sign_and_send_psbt since we're altering the API;
the final patch restores it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a new fundamental routine to obtain UTXOs from the database.
It's not the most efficient approach, as it returns a single UTXO at a
time, but it can consolidate all our UTXO handling (becoming more
complex by the reservation timeout logic).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
These keep the struct utxo in sync with the database, explicitly:
these will be the only places where utxo->status is set.
The old routines will be removed at the end.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
PSETs have a bit different requirements. The witness_utxo needs
the asset tag + values, and these should also be added to the PSET
struct separately as well. To do this, we create a new 'init' method for
elements inputs, which takes care of the elements specific things.
This is the only place outside the wallet code where we create
a 'struct utxo', so it makes sense for us to move that logic inside
the wallet.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It looked like we weren't printing the address on closing outputs.
But we are, because the 'scriptPubkey' field is in the 'outputs' db
table since 0.7.3 (66a47d2761).
So make the logic clearer, and remove a completely bogus comment (UTXOs
with closing_info are definitely spendable!).
We export the json_add_utxos() for future use, too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We're not allowed to command_fail() once we've started json_success.
That's OK, because encoding a known output can only fail if something is
badly, badly wrong.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
These are pulled from wallet/wallet.c, with the fix now that we grind sigs.
This reduces the fees we pay slightly, as you can see in the coinmoves changes.
I now print out all the coin moves in suitable format before we match:
you only see this if the test fails, but it's really helpful.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: `txprepare` now prepares transactions whose `nLockTime` is set to the tip blockheight, instead of using 0. `fundchannel` will use `nLockTime` set to the tip blockheight as well.
We were assuming `wallet_channel_insert` that there cannot be a matching peer
if our in-memory representation isn't bound to it (`dbid == 0`). If we then
attempt to create the peer, and we already had one it'd cause a unique
constraint violation. As far as I can tell this could end up happening if we
have an uncommitted channel, and then exited without cleanup (`tal_destructor`
on the uncommitted channel not running). This could then leave the peer in the
DB. This is because the constraint that every peer has at least one channel is
not enforce at DB level, but rather in destructors that may or may not run.
Changelog-Fixed: Fixed a failing assertion if we reconnect to a peer that we had a channel with before, and then attempt to insert the peer into the DB twice.
Changelog-Added: JSON-RPC: new call `signpsbt` which will add the wallet's signatures to a provided psbt
Changelog-Added: JSON-RPC: new call `sendpsbt` which will finalize and send a signed PSBT
Reserve and unreserve wallet UTXOs using a PSBT which includes those
inputs.
Note that currently we unreserve inputs everytime the node restarts.
This will be addressed in a future commit.
Changelog-Added: JSON-RPC: Adds two new rpc methods, `reserveinputs` and `unreserveinputs`, which allow for reserving or unreserving wallet UTXOs
Unused here, but we'll use it in the next commit so that we can always
pass back the effective / used feerate to the caller of `reserveinputs`
This makes opening a channel much easier if we've internally determined
the feerate
We're not using the change_outnum for withdraw tx's (and the way
we were calculating it was broken as of the addition of 'multiple
outputs'). This removes the change output knowhow from withdraw_tx
entirely, and pushes the responsibility up to the caller to
include the change output in the output set if desired.
Consequently, we also remove the change output knowhow from hsmd.
We erase peer data after the last channel close transaction for that
peer is 100 blocks deep. We were failing to finish the migration because
the peer_id lookup on these was failing.
Now we ignore any channel with a null peer_id.
Fixes#3768
Currently 'listfunds' lies, a teensy eeinsy bit, in that it doesn't list
all of the funds in a wallet (it omits reserved wallet UTXOs). This
change makes the reserved outputs visible by listing them in the
'outputs' section along with a new field, 'reserved', which denotes the
UTXO's state
Changelog-Changed: JSON-RPC: `listfunds` 'outputs' now includes reserved outputs, designated as 'reserved' = true
We update the `last_tx` in `channels` to be psbt format, instead
of a linearized transaction.
We need the amount of the input populated, which we have since
this is the 'funding' amount. Ideally we'd also populate the funding
scriptPubkey, but to do that we'd need to access the HSM module to fetch
our local funding pubkey, which isn't initialized at the time that the
database migrations are run.
Since the only field the HSM uses currently when signing these is the
amount field, it's ok to just leave it out.
needs a test!
when re-populating a channel's data from the database, since we don't
store the psbt data (with input scripts + amounts), we need to
re-populate it.
the right solution is to patch the psbt into the database; for now we
'monkey-patch' it in.
We did not take the value of --commit-fee into account : this removes
the unused option from lightningd and instead registers it in bcli,
where we set the actual feerate of commitment transactions. This also
corrects the documentation.
Changelog-Fixed: config: we now take the --commit-fee parameter into account.
Signed-off-by: Antoine Poinsot <darosior@protonmail.com>
Since we now over-write the wally malloc/free functions, we need to do
so for tests as well. Here we pull up all of the common setup/teardown
logic into a separate place, and update the tests that use libwally to
use the new common_setup core
Changelog-None
This moves the notification for our coin spends from when it's
successfully submited to the mempool to when they're confirmed in a
block.
We also add an 'informational' notice tagged as `spend_track` which
can be used to track which transaction a wallet output was spent in.
Previously we were annotating every movement with the blockheight of
lightningd at notification time. Which is lossy in terms of info, and
won't be helpful for reorg reconciliation. Here we switch over to
logging chain moves iff they've been confirmed.
Next PR will fix this up for withdrawals, which are currently tagged
with a blockheight of zero, since we log on successful send.
On node start we replay onchaind's transactions from the database/from
our loaded htlc table. To keep things tidy, we shouldn't notify the
ledger about these, so we wrap pretty much everything in a flag that
tells us whether or not this is a replay.
There's a very small corner case where dust transactions will get missed
if the node crashes after the htlc has been added to the database but
before we've successfully notified onchaind about it.
Notably, most of the obtrusive updates to onchaind wrappings are due to
the fact that we record dust (ignored outputs) before we receive
confirmation of its confirmation.
HTLCs trigger a coin movement only when their final form (state) is
reached. This prevents us from needing to concern ourselves with
retries, as well as being the absolutely most correct in terms of
answering the question 'when has the money irrevocably changed hands'.
All coin movements should pass this bar, for ultimate accounting
correctness
The current plan for coin movements involves tagging
origination/destination htlc's with a separate tag from 'routed' htlcs
(which pass through our node). In order to do this, we need a persistent flag on
incoming htlcs as to whether or not we are the final destination.
For sqlite3 versions < 3.14 (i.e. HAVE_SQLITE3_EXPANDED_SQL is not set),
tracing is used to dump statements. The function db_sqlite3_exec()
registers a tracing callback in the beginning and unregisters it at the
end to "avoid it accessing the potentially stale pointer to stmt".
However, the unregistering so far only happened in the success case,
i.e. if the prepare or step calls failed, the callback was still set!
Running the test wallet/test/db-run with sqlite 3.11 leads to a
segmentation fault in the last call to db_commit_transaction():
the tested transaction contains an invalid statement and the (still
registered) trace callback is triggered then by sqlite3_exec() in
db_sqlite3_commit_tx(), leading to a segfault in db_changes_add()
(according to gdb), where it tries to access "stmt->query->readonly".
Changelog-None
I noticed the following in logs for tests/test_connection.py::test_feerate_stress:
```
DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-chan#1: Failing HTLC 18446744073709551615 due to peer death
DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-chan#1: local_routing_failure: 8194 (WIRE_TEMPORARY_NODE_FAILURE)
```
This is because it reports the (transient) node_failure error, because
our channel_failure message is incomplete. Fix this wart up.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
