We would fail even if a process exited cleanly after having the line we
were looking for, because we checked if it died before reading the logs.
Co-Authored-by: Daniela Brozzoni <daniela@revault.dev>
Signed-off-by: Antoine Poinsot <darosior@protonmail.com>
This test takes 695 seconds, because fundwallet waits for the wallet to
notice the tx, which takes 60 seconds if not DEVELOPER. Do all the waiting
at once, and this speeds the test up to 153 seconds.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This adds our first (basic) schema, and sews support into pyln-testing
so it will load schemas for any method for doc/schemas/{method}.schema.json.
All JSON responses in a test run are checked against the schema (if any).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Tests that will only run when !EXPERIMENTAL_DUAL_FUND:
@pytest.marker.openchannel('v1')
def test_...()
Tests that will only run when EXPERIMENTAL_DUAL_FUND:
@pytest.marker.openchannel('v2')
def test_...()
Users are more upset recently with the cost of unilateral closes
than they are the risk of being cheated. While we complete our
anchor implementation so we can use low fees there, let's
get less aggressive (we already have 34 or 18 blocks to close
in the worst case).
The changes are:
- Commit transactions were "2 CONSERVATIVE" now "6 ECONOMICAL".
- HTLC resolution txs were "3 CONSERVATIVE" now "6 ECONOMICAL".
- Penalty txs were "3 CONSERVATIVE" now "12 ECONOMICAL".
- Normal txs were "4 ECONOMICAL" now "12 ECONOMICAL".
There can be no perfect levels, but we have had understandable
complaints recently about how high our default fee levels are.
Changelog-Changed: Protocol: channel feerates reduced to bitcoind's "6 block ECONOMICAL" rate.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
You still shouldn't do this (you could get some transient failures),
but at least you have a decent chance if you reinstall over a running
daemon, instead of getting confusing internal errors if message
formats have changed.
Changelog-Added: lightningd: we now try to restart if subdaemons are upgraded underneath us.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: #4346
e.g. in test_closing_id we can get a spend from the first (closed) channel
in the same block as the open of the second. Half the time, we'll choose
the wrong one as scid.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Since we turned many errors into warnings, we want our tests to fail
when they happen unexpectedly. We make WARNING clear in the strings
we print, too, to help out.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This 'fixes' the `wait_for` helper by removing a pointless final
`time.sleep()`, thus potentially making the method return quicker.
The old code could have had three final states:
- success() := True
- Timeout and success() := True
- Timeout and success() := False
The new code has just two final state:
- success() := True
- Timeout and success() := False
It ensures the final `time.sleep()` is just the right amount before timeout.
And more importantly making it more readable :-)
Changelog-None
We are printing `repr(obj)` which is not pretty-printed, hard to read,
and can't even be copied and inspected to JSON tools. We now print the
JSONified and indented calls and responses for easier debugging based
on solely the logs (useful for CI!).
Changelog-Added: pyln-testing: The RPC client will now pretty-print requests and responses to facilitate log-based debugging.
We were getting a couple of starvations, so we need a fair filelock. I
also wasn't too happy with the lock as is, so I hand-coded it quickly.
Should be correct, but the overall timeout will tell us how well we
are doing on CI.
we got rid of push_msats for dual funded channels. this assumes that hte
peer will match an equal amount of sats as ours (the df_accepter.py
plugin will do this)
3.0.12 here:
```
pyln/testing/utils.py:9: error: Cannot find implementation or library stub for module named 'filelock'
pyln/testing/utils.py:9: error: Cannot find implementation or library stub for module named 'filelock'
pyln/testing/utils.py:9: note: See https://mypy.readthedocs.io/en/latest/running_mypy.html#missing-imports
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This was causing the following error
```
Exception in thread Thread-553:
Traceback (most recent call last):
File "/usr/lib/python3.6/threading.py", line 916, in _bootstrap_inner
self.run()
File "/usr/lib/python3.6/threading.py", line 864, in run
self._target(*self._args, **self._kwargs)
File "/tmp/cirrus-ci-build/contrib/pyln-testing/pyln/testing/utils.py", line 232, in tail
self.err_logs.append(line.rstrip().decode('UTF-8', 'replace')).rstrip()
AttributeError: 'NoneType' object has no attribute 'rstrip'
[gw5] [ 33%] FAILED tests/test_misc.py::test_bitcoin_failure
```
Notice the second call to `.rstrip()` on the return value of `.append()`
Both my machine and apparently the CI tester machines regularly run
into issues with load on the system, causing timeouts (and
unresponsiveness). The throttler throttles the speed with which new
instances of c-lightning get started to avoid overloading. Since the
plugin used for parallelism when testing spawns multiple processes we
need to lock on the fs. Since we have that file open already, we'll
also write a couple of performance metics to it.
We sometimes have very specific sequences of tx broadcasts and blocks
being generated to confirm them. If the confirmation is missed the
test can completely get out of sync. Make debugging this easier by
logging what we confirmed.
Logs may contain non-ASCII and non-UTF8 symbols, which crashes the
tailer. It's better to replace them with a glyph representing
undecodeable symbols instead, and handle the issue further up the
call-chain.
We rely on it when logging, but didn't set it in the class, rather we
did in the sub-classes. This proved to be rather annoying to search
since it'd just fail silently and not log any output.
It was really flaky, especially under `test_mpp_interference_2`, most likely
due to multiple calls to `fund_channel`. This commit looks for the specific
txids in the `listfunds` output and the `getrawmempool` output, avoiding
strange artifacts from multiple calls.
The next patch perturbed things enough that we suddenly started
getting (with --track-origins=yes):
Valgrind error file: valgrind-errors.120470
==120470== Use of uninitialised value of size 8
==120470== at 0x14EBD5: htable_val (htable.c:150)
==120470== by 0x14EC3C: htable_firstval_ (htable.c:165)
==120470== by 0x14F583: htable_del_ (htable.c:349)
==120470== by 0x11825D: pointer_referenced (memleak.c:65)
==120470== by 0x118485: scan_for_pointers (memleak.c:121)
==120470== by 0x118500: memleak_remove_region (memleak.c:130)
==120470== by 0x118A30: call_memleak_helpers (memleak.c:257)
==120470== by 0x118A8B: call_memleak_helpers (memleak.c:262)
==120470== by 0x118A8B: call_memleak_helpers (memleak.c:262)
==120470== by 0x118B25: memleak_find_allocations (memleak.c:278)
==120470== by 0x10EB12: closing_dev_memleak (closingd.c:584)
==120470== by 0x10F3E2: main (closingd.c:783)
==120470== Uninitialised value was created by a heap allocation
==120470== at 0x483B7F3: malloc (in /usr/lib/x86_64-linux-gnu/valgrind/vgpreload_memcheck-amd64-linux.so)
==120470== by 0x1604E8: allocate (tal.c:250)
==120470== by 0x160AA9: tal_alloc_ (tal.c:428)
==120470== by 0x119BE0: new_per_peer_state (per_peer_state.c:24)
==120470== by 0x11A101: fromwire_per_peer_state (per_peer_state.c:95)
==120470== by 0x10FB7C: fromwire_closingd_init (closingd_wiregen.c:103)
==120470== by 0x10ED15: main (closingd.c:626)
==120470==
This is because there is uninitialized padding at the end of struct
peer_state.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And when it's set, and we're SLOW_MACHINE, simply disable valgrind.
Since Travis (SLOW_MACHINE=1) only does VALGRIND=1 DEVELOPER=1 tests,
and VALGRIND=0 DEVELOPER=0 tests, it was missing tests which needed
DEVELOPER and !VALGRIND.
Instead, this demotes them to non-valgrind tests for SLOW_MACHINEs.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We can query all the txids at once, rather than one at a time.
Doesn't make any measurable difference to full runtime testing here
though.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We might have funds prior to calling join_nodes(), so testing that
we've all seen the block is better.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is what fund_channel() does, which is more thorough than what
we were doing. But since the order of the logs is undefined, we need
to be a little careful.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Reduces VALGRIND=1 node_factory.line_graph(5) time on my laptop from 42s to 36s.
This is simply because forking all the subdaemons just to check the
version is very expensive under valgrind.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
