Update the lightningd <-> channeld interface with lots of new commands to needed to facilitate spicing.
Implement the channeld splicing protocol leveraging the interactivetx protocol.
Implement lightningd’s channel_control to support channeld in its splicing efforts.
Changelog-Added: Added the features to enable splicing & resizing of active channels.
Update gossip routiens and various other hecks on the channel state to consider AWAITING_SPLICE to be routable and treated similar to CHANNELD_NORMAL.
Small updates to psbt interface
Changelog-None
This cause of cascading failure was pointed out by @t-bast: if fees spike and
you don't timeout an outgoing onchain HTLC, you should nonetheless fail the incoming htlc
because otherwise the incoming peer will close on you.
Of course, there's a risk of losing funds, but this only happens if you weren't going to get the HTLC spend in time anyway. And it would also catch any other reason that the downstream onchain goes wrong, containing the damage.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Reported-by: @t-bast
Changelog-Fixed: Protocol: We will close incoming HTLCs early if the outgoing HTLC is stuck onchain long enough, to avoid cascating failure.
We usually have access to `ld`, so avoid the global.
The only place generic code needs it is for the json command struct,
and that already has accessors: add one for libplugin and lightningd
to tell it if deprecated apis are OK.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We were debugging a number of issues related to the forwarding logic,
when using public scids on private channels, and we noticed that we
are very verbose everywhere, except where it counts, i.e., what
decisions are being taken. So we add a couple of debug logs, and a
final info one that tells the operator which resolution was chosen in
the end.
In particular:
- Bolt 4: add route blinding construction
- Bolt 4: add blinded payments
And this means it's not experimental, so we can turn it on
by default!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: blinded payments are now supported by default (not just with `--experimental-onion-messages`)
"Allow nodes to overshoot final htlc amount and expiry (#1032)"
Note that this also renamed `min_final_cltv_expiry` to the more-correct
`min_final_cltv_expiry_delta`.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
"BOLT 4: Remove legacy format, make var_onion_optin compulsory."
This also renamed the redundant "tlv_payload" to "payload", so we
replace "tlv_tlv_payload" with "tlv_payload" everyhere!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
```
----------------------------- Captured stderr call -----------------------------
Sending onchaind an invalid message 03ed00000000000000004e52a9129a66619d6809b1024eb9a0159f173a988f3a5d0bdd2447b4fcc24cef
lightningd: FATAL SIGNAL 6 (version 3c57147-modded)
```
The channel state can also be `FUNDING_SPEND_SEEN` if onchaind is still
starting up.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We didn't actually populate them properly, and the real annotations
are on inputs and outputs.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: JSON-RPC: `listtransactions` `channel` and `type` field removed at top level.
```
make check-source-bolt CHECK_BOLT_PREFIX="--prefix=BOLT-route-blinding" BOLTVERSION=guilt/offers
```
Other than textual changes, this does:
1. Ensures we put total_amount_msat in onion final hop (reported by @t-bast).
2. Require that they put total_amount_msat in onion final hop.
3. Return `invalid_onion_blinding` exactly as defined by the spec (i.e. less
aggressive when we're the final hop) (also reported by @t-bast, but I already
knew).
See: #5823
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: `offers` breaking blinded payments change (total_amount_sat required, Eclair compat)
You can use rs->nextcase, but we don't always keep that around, so
keep a flag in onion_payload.
We'll use this in the "do we need to return a blinded error code"
patch.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
```
E Global errors:
E - Node /tmp/ltests-adkwu44c/test_logging_1/lightning-2/ has memory leaks: [
E {
E "backtrace": [
E "ccan/ccan/tal/tal.c:442 (tal_alloc_)",
E "lightningd/peer_control.c:2203 (load_channels_from_wallet)",
E "lightningd/lightningd.c:1105 (main)"
E ],
E "label": "lightningd/peer_control.c:2203:struct htlc_in_map",
E "parents": [
E "lightningd/lightningd.c:107:struct lightningd"
E ],
E "value": "0x55d920a345e8"
E }
E ]
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This current spec is not strict enough: we might complain that the
next peer is not connected, for example, which leaks information.
So return WIRE_INVALID_ONION_BLINDING even if we're the first hop
on the path, to be safe.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This makes us match eed2ab0c30ad7f93e3b2641ca9d7ade32f3d121d
("Use `invalid_onion_blinding` everywhere").
1. Numerous typographical changes.
2. Make sure we *always* return WIRE_INVALID_ONION_BLINDING if
we're in a blinded path.
3. Handle p->total_msat correctly (MPP payments).
4. Reorganize blinding handling just like spec order.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We still have an "enum forward_style" for the database, where old-style
forwards can still exist.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Removed: Protocol: we no longer forward HTLCs with legacy onions.
We have to allow them (as otherwise `fees_collected_msat` in getinfo breaks),
but it means that actually, in_htlc_id might be missing in listforwards
(also, out_htlc_id might be missing, which we didn't catch before).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: #5628
Otherwise what the hook sees is actually a lie, and if it sets it
we might override it.
The side effect is that we add an explicit "forward_to" field, and
allow hooks to override it. This lets a *hook* control channel
choice explicitly.
Changelod-Added: Plugins: `htlc_accepted_hook` return can specify what channel to forward htlc to.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Using `listfowards` for this wrong; expose this directly if people
care (and unlike listforwards, which could be deleted, we have to
remember these while the channel is still open!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `listhtlcs` new command to list all known HTLCS.
And document that we never know payment_hash.
Changelog-Added: JSON-RPC: `listforwards` now shows `in_htlc_id` and `out_htlc_id`
Changelog-Changed: JSON-RPC: `listforwards` now never shows `payment_hash`; use `listhtlcs`.
This includes the recommendation that we use 10 minute grace period,
so add quotes to where we use that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We can do this now the function is cleaned up.
Always better to do the work inside param() since then `check`
gets the benefit.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Removed: Old order of the `status` parameter in the `listforwards` rpc command (deprecated in v0.10.2)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Again, we should use the real channel_type, but we approximate.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: private channels will only route using short-channel-ids if channel opened with option_scid_alias-supporting peer.
We have them split over common/param.c, common/json.c,
common/json_helpers.c, common/json_tok.c and common/json_stream.c.
Change that to:
* common/json_parse (all the json_to_xxx routines)
* common/json_parse_simple (simplest the json parsing routines, for cli too)
* common/json_stream (all the json_add_xxx routines)
* common/json_param (all the param and param_xxx routines)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There's one case where we can present more infomation, so do that, and
fix documentation.
Changelog-Added: JSON-RPC: `listforwards` now shows `out_channel` in more cases: even if it couldn't actually send to it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: #5329
They're not logically connected: we can know where they wanted to
go, but we didn't send it.
Where possible, it's the scid *they asked for*; otherwise, it's the
scid or fallback to the alias, but do this in the *caller*, not by
overriding inside wallet_forwarded_payment_add.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. We set an outgoing htlc's `failonion` when we get a commitment_signed.
2. We don't transfer it to the corresponding incoming HTLC until we send
commitment_signed and receive revoke_and_ack (meaning, outgoing htlc is
completely dead).
3. If between these steps we go onchain, onchaind (after 3 blocks) tells us
to fail the HTLC.
4. hout->failonion is set, but hout->hin has not been failed yet. We
do a sanity check and print a nasty message, and fail it with
WIRE_PERMANENT_CHANNEL_FAILURE instead of relaying the error.
So handle this case explicitly.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We had json_add_amount_msat_only(), which was designed to be used to
print out msat fields, if we had sats.
However, we misused it, so split it into the three different cases:
1. json_add_amount_sat_msat: We are using it correctly, with a field called
xxx_msat.
2. json_add_amount_sats_deprecated: We were using it wrong, so deprecate
the old field and create a new one which does end in _msat.
3. json_add_sats: we were using it to hand sats as a JSON parameter to an
interface, where "XXXsat".
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: Plugins: `rbf_channel` and `openchannel2` hooks `their_funding` (use `their_funding_msat`)
Changelog-Deprecated: Plugins: `openchannel2` hook `dust_limit_satoshis` (use `dust_limit_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `funding_satoshis` (use `funding_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `dust_limit_satoshis` (use `dust_limit_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `channel_reserve_satoshis` (use `channel_reserve_msat`)
Changelog-Deprecated: Plugins: `channel_opened` notification `amount` (use `funding_msat`)
Changelog-Deprecated: JSON-RPC: `listtransactions` `msat` (use `amount_msat`)
Changelog-Deprecated: Plugins: `htlc_accepted` `forward_amount` (use `forward_msat`)
Changelog-Added: Plugins: `htlc_accepted` now exposes the `short_channel_id` for the channel from which that HTLC is coming from and the low-level per-channel HTLC `id`, which are necessary for bridging two different Lightning Networks when MPP is involved.
