And require --developer to use them.
Also refuse redirection to deprecated APIs if deprecated APIs are disabled!
Changelog-Removed: `dev-sendcustommsg` (use `sendcustommsg`, which was added in v0.10.1)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I obviously like the word "capabilities" since I reused it to refer
to the HSM's overall features :(
Suggested-by: @ksedgwic
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Update the lightningd <-> channeld interface with lots of new commands to needed to facilitate spicing.
Implement the channeld splicing protocol leveraging the interactivetx protocol.
Implement lightningd’s channel_control to support channeld in its splicing efforts.
Changelog-Added: Added the features to enable splicing & resizing of active channels.
Clean restart of daemon after a tx-abort is a nice way to work around
the 'persistent' disconnect that we t-bast noticed.
Changelog-Fixed: `dualopend`: Fix behavior for tx-aborts. No longer hangs, appropriately continues re-init of RBF requests without reconnction msg exchange.
In most cases, it's the same as option_anchor_outputs, but for
fees it's different. This transformation is the simplest:
pass it as a pair, and test it explicitly.
In future we could rationalize some paths, but this was nice
and mechanical.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We need to know both, because in theory we could negotiate a
non-anchor channel even if they support it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is an internal type: it has no API guarantees (indeed, I'm about
to change it, which is how I discovered scb was using it).
Fortunately for every case we care about, it is actually a wireaddr
(in theory the peer can connect locally using a local socket, but this
is mostly for testing and is a very strange setup, and so simply don't
do scb for those).
In this case, the wire encoding is a single byte followed by the
wireaddr, so open-code that in scb_wire.csv for compatibility.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
CI hit this issue where it would get a tx_abort in fundchannel. This
happens when the dualopend we use to query the feerates has not exited
yet (it waits for the tx_abort reply), and we mistakenly reuse it.
With multi-channel support, this is wrong: just run another one and it
all Just Works.
This means we need to rework our dual_open_control.c logic, since it
would previously create an unsaved channel then not clean up if
something went wrong.
Most people will never try to negotiate opening multiple channels to
the same peer at the same time (vs. having an established channel and
opening a new one), so this case is a bit weird.
```
rates = l1.rpc.dev_queryrates(l2.info['id'], amount, amount)
# l1 leases a channel from l2
l1.rpc.fundchannel(l2.info['id'], amount, request_amt=amount,
feerate='{}perkw'.format(feerate),
> compact_lease=rates['compact_lease'])
tests/test_opening.py:1611:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
contrib/pyln-client/pyln/client/lightning.py:833: in fundchannel
return self.call("fundchannel", payload)
contrib/pyln-testing/pyln/testing/utils.py:721: in call
res = LightningRpc.call(self, method, payload, cmdprefix, filter)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <pyln.testing.utils.PrettyPrintingLightningRpc object at 0x7f6cbcd97950>
method = 'fundchannel'
payload = {'amount': 500000, 'announce': True, 'compact_lease': '029a00640064000000644c4b40', 'feerate': '2000perkw', ...}
cmdprefix = None, filter = None
def call(self, method, payload=None, cmdprefix=None, filter=None):
"""Generic call API: you can set cmdprefix here, or set self.cmdprefix
...
if not isinstance(resp, dict):
raise ValueError("Malformed response, response is not a dictionary %s." % resp)
elif "error" in resp:
> raise RpcError(method, payload, resp['error'])
E pyln.client.lightning.RpcError: RPC call failed: method: fundchannel, payload: {'id': '022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59', 'amount': 500000, 'feerate': '2000perkw', 'announce': True, 'request_amt': 500000, 'compact_lease': '029a00640064000000644c4b40'}, error: {'code': -1, 'message': 'Abort requested', 'data': {'id': '022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59', 'method': 'openchannel_init'}}
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Libwally update breaks compatibility, so
we do this in one large step.
Changelog-Changed: JSON-RPC: elements network PSET now only supports PSETv2.
Changelog-Added: JSON-RPC: PSBTv2 supported for fundchannel_complete, openchannel_update, reserveinputs, sendpsbt, signpsbt, withdraw and unreserveinputs parameter psbt, openchannel_init and openchannel_bump parameter initialpsbt, openchannel_signed parameter signed_psbt and utxopsbt parameter utxopsbt
This fixes the following compilation error
and allow rebuilding again on 32-bit platform.
```
lightningd/dual_open_control.c: In function 'validate_input_unspent':
lightningd/dual_open_control.c:2627:43: error: format '%llu' expects argument of type 'long long unsigned int', but argument 4 has type 'size_t' {aka 'unsigned int'} [-Werror=format=]
2627 | err = tal_fmt(pv, "PSBT input at index %"PRIu64
| ^~~~~~~~~~~~~~~~~~~~~~~
2628 | " missing serial id", i);
| ~
| |
| size_t {aka unsigned int}
ccan/ccan/tal/str/str.h:43:46: note: in definition of macro 'tal_fmt'
43 | tal_fmt_(ctx, TAL_LABEL(char, "[]"), __VA_ARGS__)
| ^~~~~~~~~~~
```
PS: apparently I'm the only remaining people that ran cln on an old raspberry pi 2?
Changelog-None
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
It's not likely but possible that the node's settings will shift btw a
start and an RBF; we persist the setting to the database so we don't
lose it.
Right now holding onto it forever is kind of extra but maybe we'll
reuse the setting for splices? idk.
Should this be a channel type??
`openchannel_init` takes a psbt, which we pipe over to dualopend
process.
If the peer requests that they'll only accept confirmed inputs, we need
to go validate those before we continue.
This wires up the harness for this (validation check yet tc)
technically we don't need this info after the channel opens, but for any
subsequent RBF (and maybe splice?) we need to remember what the
open/accept peer signaled
not amazing, since we'll probably call openchannel_update multiple
times per open, but this is the simplest way to confirm that we're
not sending unconfirmed outputs to peer.
When a channel open fails, we use tx-abort instead of warning/error.
This means that the peer won't disconnect! And instead when a new
message arrives, we'll need to rebuild the dualopend subd (if missing).
Makes opens a bit easer to retry (no reconnect needed), as well as keeps
the connection alive for other channels we may have with that peer.
Changelog-Changed: Experimental-Dual-Fund: open failures don't disconnect, but instead fail the opening process
We didn't actually populate them properly, and the real annotations
are on inputs and outputs.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: JSON-RPC: `listtransactions` `channel` and `type` field removed at top level.
We're soon going to call json_add_unsaved_channel and
json_add_uncommitted_channel from a new place, where we want the peer
state directly included.
Based on patch by @vincenzopalazzo.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `listfunds` now lists coinbase outputs as 'immature' until they're spendable
Changelog-Changed: JSON-RPC: UTXOs aren't spendable while immature
We were leaving out the `channel_max_msat` for `openchannel2` when
channels are 'wumbo' (the conversion to msat in the json helper
overflowed, which resulted in the field not being printed)
Changelog-Changed: Plugins: `openchannel2` now always includes the `channel_max_msat`
First, merge the _ahf_ and non-ahf interfaces.
Second, remove the always-NULL txs->cmd field.
Then, add optional id_prefix for bitcoind_sendrawx, so if it's
triggered by a command (e.g. "withdraw") it's shown correctly in logs.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This alters the billboard, but that's a human-readable thing so not
noted in CHANGELOG.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `listpeers` `status` now refers to "channel ready" rather than "funding locked" (BOLT language change for zeroconf channels)
Changelog-Added: JSON-RPC: `channel_opened` notification `channel_ready` flag.
Changelog-Deprecated: JSON-RPC: `channel_opened` notification `funding_locked` flag (use `channel_ready`: BOLTs namechange).
This contains the zeroconf stuff, with funding_locked renamed to
channel_ready. I change that everywhere, and try to fix up the
comments.
Also the `alias` field is called `short_channel_id`.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Protocol: `funding_locked` is now called `channel_ready` as per latest BOLTs.
Previously, "funding_locked" was always "true"!
(It's actually been wrong since its introduction in v0.7.3!)
Changelog-Fixed: Plugins: `channel_opened` notification `funding_locked` field is now accurate: was always `true`.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We used to tell connectd to remember our connect delay, and hand it
back (increased if necessary).
Instead, simply record when we last tried to connect. If it was less
than 10 minutes ago, double delay (up to 5 minutes max), otherwise
reset delay to 1 second.
This covers all scenarios: whether we reconnect then immediately
disconnect, or never successfully connect, it doesn't matter.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: #5453
We need a record of the channel account before you start sending
payments through it. Normally we don't start allowing payments to be
sent until after the channel has locked in but zeroconf does away with
this assumption.
Instead we push out a "channel_proposed" event, which should only show
up for zeroconfs.
We don't push out a coin_move for a channel open until it's locked in,
but this causes problems for channels that close before they're locked.
So if we go the "close before locked in" route, we push out a channel
open event.
These will get a blockheight of 0, if we haven't seen the
funding transaction in a block yet.
The only places which should call try_reconnect now are the "connect"
command, and the disconnect path when it decides there's still an
active channel.
This introduces one subtlety: if we disconnect when there's no active
channel, but then the subd makes one, we have to catch that case!
This temporarily reverts "slow" reconnections to fast ones: see next
patch.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This allows us to detect when lightningd hasn't seen our latest
disconnect/reconnect; in particular, we would hit the following pattern:
1. lightningd says to connect a subd.
2. connectd disconnects and reconnects.
3. connectd reads message, connects subd.
4. lightningd reads disconnect and reconnect, sends msg to connect to subd again.
5. connectd asserts because subd is alreacy connected.
This way connectd can tell if lightningd is talking about the previous
connection, and ignoere it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
