These are useful for requests:
1. "outpoint": <txid>:<outnum>
2. "feerate": strings or a number
3. "outputdesc": bitcoin-style addresses-as-keys
4. "msat_or_all": amount or "all"
4. "msat_or_any": amount or "any"
5. "short_channel_id_dir": scid with /0 or /1.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Either because lightningd tells us it wants to talk, or because the peer
says something about a channel.
We also introduce a behavior change: we disconnect after a failed open.
We might want to modify this later, but we it's a side-effect of openingd
not holding onto idle connections.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
But this requires a watch-only wallet, and python-bitcoinlib doesn't support
multiple wallets, so we need to unload the original one, but then we need
to generate a block, so that can't generate a new address, so we need
an address arg to generate_block.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If we fund a channel between two nodes, then mine all the blocks to
announce it, any other nodes may see the announcement before the
blocks, causing CI to complain about "bad gossip":
```
lightningd-4: 2022-01-25T22:33:25.468Z DEBUG 032cf15d1ad9c4a08d26eab1918f732d8ef8fdc6abb9640bf3db174372c491304e-gossipd: Ignoring future channel_announcment for 113x1x1 (current block 112)
lightningd-4: 2022-01-25T22:33:25.468Z DEBUG 032cf15d1ad9c4a08d26eab1918f732d8ef8fdc6abb9640bf3db174372c491304e-gossipd: Bad gossip order: WIRE_CHANNEL_UPDATE before announcement 113x1x1/0
lightningd-4: 2022-01-25T22:33:25.468Z DEBUG 032cf15d1ad9c4a08d26eab1918f732d8ef8fdc6abb9640bf3db174372c491304e-gossipd: Bad gossip order: WIRE_CHANNEL_UPDATE before announcement 113x1x1/1
lightningd-4: 2022-01-25T22:33:25.468Z DEBUG 032cf15d1ad9c4a08d26eab1918f732d8ef8fdc6abb9640bf3db174372c491304e-gossipd: Bad gossip order: WIRE_NODE_ANNOUNCEMENT before announcement 032cf15d1ad9c4a08d26eab1918f732d8ef8fdc6abb9640bf3db174372c491304e
```
Add a new helper for this case, and use it where there are more than 2 nodes.
Cleans up test_routing_gossip and a few other places which did this manually.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This seems to trigger now, especially on PostgresQL (maybe it's faster
to process blocks?).
e.g. test_closing_simple() hangs in close(), because the close is unilateral
because the HTLC timed out, so it's waiting for a block (other lines removed):
```
lightningd-1: 2022-01-12T00:33:46.258Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-channeld-chan#1: peer_out WIRE_COMMITMENT_SIGNED
lightningd-1: 2022-01-12T00:33:46.278Z DEBUG lightningd: close_command: timeout = 172800
2022-01-12T01:03:36.9757201Z lightningd-2: 2022-01-12T00:33:46.384Z DEBUG lightningd: Adding block 104: 73ffa19d27d048613b2731e1682b4efff0dc226807d8cc99d724523c2ea58204
2022-01-12T01:03:36.9759053Z lightningd-2: 2022-01-12T00:33:46.396Z DEBUG lightningd: Adding block 105: 44fd06ed053a0d0594abcfefcfa69089351fc89080826799fb4b278a68fe5c20
2022-01-12T01:03:36.9760865Z lightningd-2: 2022-01-12T00:33:46.406Z DEBUG lightningd: Adding block 106: 0fee2dcbd1376249832642079131275e195bba4fb49cc9968df3a899010bba0f
2022-01-12T01:03:36.9762632Z lightningd-2: 2022-01-12T00:33:46.418Z DEBUG lightningd: Adding block 107: 7f24f2d7d3e83fe3256298bd661e57cdf92b058440738fd4d7e1c8ef4a4ca073
2022-01-12T01:03:36.9773411Z lightningd-2: 2022-01-12T00:33:46.429Z DEBUG 0266e4598d1d3c415f572a8488830b60f7e744ed9235eb0b1ba93283b315c03518-channeld-chan#1: peer_in WIRE_REVOKE_AND_ACK
2022-01-12T01:03:36.9794707Z lightningd-2: 2022-01-12T00:33:46.437Z DEBUG 0266e4598d1d3c415f572a8488830b60f7e744ed9235eb0b1ba93283b315c03518-channeld-chan#1: Commits outstanding after recv revoke_and_ack
2022-01-12T01:03:36.9788197Z lightningd-2: 2022-01-12T00:33:46.433Z DEBUG lightningd: Adding block 108: 283b371fb5d1ef42980ea10ab9f5965a179af8e91ddf31c8176e79820e1ec54d
2022-01-12T01:03:36.9799347Z lightningd-2: 2022-01-12T00:33:46.439Z DEBUG 0266e4598d1d3c415f572a8488830b60f7e744ed9235eb0b1ba93283b315c03518-channeld-chan#1: HTLC 0[REMOTE] => RCVD_REMOVE_REVOCATION
2022-01-12T01:03:36.9808057Z lightningd-2: 2022-01-12T00:33:46.447Z UNUSUAL 0266e4598d1d3c415f572a8488830b60f7e744ed9235eb0b1ba93283b315c03518-chan#1: Peer permanent failure in CHANNELD_NORMAL: Fulfilled HTLC 0 RCVD_REMOVE_REVOCATION cltv 109 hit deadline
```
This is because `pay` returns from l1 when it has the preimage, not
when the HTLC is fully resolved. Add a helper for this, and call it
at the end of the pay test helper. We might need this elsewhere
though!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This loads up 20MB of plugins temporarily; we seem to be getting OOM
killed under CI and I wonder if this is contributing.
Doesn't significantly reduce runtime here, but I have lots of memory.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
On my machine it should have produced:
/tmp/ltests-1p0v5z1j/.locks/lock-1631090663.1066182
but instead it produced:
/private/tmp/ltests-1p0v5z1j/.locks/lock-1631090663.105848
The mismatch resulted in a hang inside flock.
Path .resolve() seems to be causing problems for others as well. It appears the library was not meant to handle complex path situations and isn't maintained as such (see link reference).
Since we have already built a full path here anyway, the call to .resolve() appears redundant.
Tested on python 3.9.6 on my Mac OS X 11.4 (20F71), Xcode 12.5.1 (12E507)
Relevant discussion: https://discuss.python.org/t/pathlib-absolute-vs-resolve/2573
As suggested in this issue https://github.com/python/mypy/issues/7484#issuecomment-529363083 we skip following import becuase with the recent version of mypy the __init__.py file make confusione inside the analysis (in the python issue it is unclear the main motivation of this issue. At list unclear to me).
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
We would fail even if a process exited cleanly after having the line we
were looking for, because we checked if it died before reading the logs.
Co-Authored-by: Daniela Brozzoni <daniela@revault.dev>
Signed-off-by: Antoine Poinsot <darosior@protonmail.com>
This test takes 695 seconds, because fundwallet waits for the wallet to
notice the tx, which takes 60 seconds if not DEVELOPER. Do all the waiting
at once, and this speeds the test up to 153 seconds.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This adds our first (basic) schema, and sews support into pyln-testing
so it will load schemas for any method for doc/schemas/{method}.schema.json.
All JSON responses in a test run are checked against the schema (if any).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Tests that will only run when !EXPERIMENTAL_DUAL_FUND:
@pytest.marker.openchannel('v1')
def test_...()
Tests that will only run when EXPERIMENTAL_DUAL_FUND:
@pytest.marker.openchannel('v2')
def test_...()
Users are more upset recently with the cost of unilateral closes
than they are the risk of being cheated. While we complete our
anchor implementation so we can use low fees there, let's
get less aggressive (we already have 34 or 18 blocks to close
in the worst case).
The changes are:
- Commit transactions were "2 CONSERVATIVE" now "6 ECONOMICAL".
- HTLC resolution txs were "3 CONSERVATIVE" now "6 ECONOMICAL".
- Penalty txs were "3 CONSERVATIVE" now "12 ECONOMICAL".
- Normal txs were "4 ECONOMICAL" now "12 ECONOMICAL".
There can be no perfect levels, but we have had understandable
complaints recently about how high our default fee levels are.
Changelog-Changed: Protocol: channel feerates reduced to bitcoind's "6 block ECONOMICAL" rate.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
You still shouldn't do this (you could get some transient failures),
but at least you have a decent chance if you reinstall over a running
daemon, instead of getting confusing internal errors if message
formats have changed.
Changelog-Added: lightningd: we now try to restart if subdaemons are upgraded underneath us.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: #4346
e.g. in test_closing_id we can get a spend from the first (closed) channel
in the same block as the open of the second. Half the time, we'll choose
the wrong one as scid.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Since we turned many errors into warnings, we want our tests to fail
when they happen unexpectedly. We make WARNING clear in the strings
we print, too, to help out.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This 'fixes' the `wait_for` helper by removing a pointless final
`time.sleep()`, thus potentially making the method return quicker.
The old code could have had three final states:
- success() := True
- Timeout and success() := True
- Timeout and success() := False
The new code has just two final state:
- success() := True
- Timeout and success() := False
It ensures the final `time.sleep()` is just the right amount before timeout.
And more importantly making it more readable :-)
Changelog-None
We are printing `repr(obj)` which is not pretty-printed, hard to read,
and can't even be copied and inspected to JSON tools. We now print the
JSONified and indented calls and responses for easier debugging based
on solely the logs (useful for CI!).
Changelog-Added: pyln-testing: The RPC client will now pretty-print requests and responses to facilitate log-based debugging.
We were getting a couple of starvations, so we need a fair filelock. I
also wasn't too happy with the lock as is, so I hand-coded it quickly.
Should be correct, but the overall timeout will tell us how well we
are doing on CI.
We were getting a number of incompatibility warning due to the
dependencies being expressed too rigidly. This losens the requirement
definitions to being compatible with a known good version, and while
we're at it we also bump all outdated requirements.
we got rid of push_msats for dual funded channels. this assumes that hte
peer will match an equal amount of sats as ours (the df_accepter.py
plugin will do this)
3.0.12 here:
```
pyln/testing/utils.py:9: error: Cannot find implementation or library stub for module named 'filelock'
pyln/testing/utils.py:9: error: Cannot find implementation or library stub for module named 'filelock'
pyln/testing/utils.py:9: note: See https://mypy.readthedocs.io/en/latest/running_mypy.html#missing-imports
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This was causing the following error
```
Exception in thread Thread-553:
Traceback (most recent call last):
File "/usr/lib/python3.6/threading.py", line 916, in _bootstrap_inner
self.run()
File "/usr/lib/python3.6/threading.py", line 864, in run
self._target(*self._args, **self._kwargs)
File "/tmp/cirrus-ci-build/contrib/pyln-testing/pyln/testing/utils.py", line 232, in tail
self.err_logs.append(line.rstrip().decode('UTF-8', 'replace')).rstrip()
AttributeError: 'NoneType' object has no attribute 'rstrip'
[gw5] [ 33%] FAILED tests/test_misc.py::test_bitcoin_failure
```
Notice the second call to `.rstrip()` on the return value of `.append()`
