Channels are within the peer structure, but the peer is freed only
when the last channel is freed.
We also implement channel_set_owner() and make peer_set_owner() a temporary
wrapper.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Much like the database; peer contains id, address, channel contains
per-channel information. Where we create a channel, we always create
the peer too.
For the moment, peer->log and channel->log coexist side-by-side, to
reduce some of the churn.
Note that this changes the API to dev-forget-channel: if we have more
than one channel, we insist they specify the short-channel-id.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Maintaining it was always fraught, since the command could go away
if the JSON RPC died. Most recently, it was broken again on shutdown
(see below).
In future we may allow pay commands to block on previous payments, so
it won't even be a 1:1 mapping. Generalize it: keep commands in a
simple list and do a lookup when a payment fails/succeeds.
Valgrind error file: valgrind-errors.5732
==5732== Invalid read of size 8
==5732== at 0x4149FD: remove_cmd_from_hout (pay.c:292)
==5732== by 0x468BAB: notify (tal.c:237)
==5732== by 0x469077: del_tree (tal.c:400)
==5732== by 0x4690C7: del_tree (tal.c:410)
==5732== by 0x46948A: tal_free (tal.c:509)
==5732== by 0x40F1EA: main (lightningd.c:362)
==5732== Address 0x69df148 is 1,512 bytes inside a block of size 1,544 free'd
==5732== at 0x4C2EDEB: free (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==5732== by 0x469150: del_tree (tal.c:421)
==5732== by 0x46948A: tal_free (tal.c:509)
==5732== by 0x4198F2: free_htlcs (peer_control.c:1281)
==5732== by 0x40EBA9: shutdown_subdaemons (lightningd.c:209)
==5732== by 0x40F1DE: main (lightningd.c:360)
==5732== Block was alloc'd at
==5732== at 0x4C2DB8F: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==5732== by 0x468C30: allocate (tal.c:250)
==5732== by 0x4691F7: tal_alloc_ (tal.c:448)
==5732== by 0x40A279: new_htlc_out (htlc_end.c:143)
==5732== by 0x41FD64: send_htlc_out (peer_htlcs.c:397)
==5732== by 0x41511C: send_payment (pay.c:388)
==5732== by 0x41589E: json_sendpay (pay.c:513)
==5732== by 0x40D9B1: parse_request (jsonrpc.c:600)
==5732== by 0x40DCAC: read_json (jsonrpc.c:667)
==5732== by 0x45C706: next_plan (io.c:59)
==5732== by 0x45D1DD: do_plan (io.c:387)
==5732== by 0x45D21B: io_ready (io.c:397)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Load the first block we're possibly interested in, then load the peers so
we can restore the tx watches, then finally replay to the current tip.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Eventually we want to save blockchain in db to avoid this scan, but
for the moment, we need to reload as far back as we may be interested in.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We use the tal notifiers to attach a `backtrace` object on every
allocation.
This also means moving backtrace_state from log.c into lightningd.c, so
we can hand it to memleak_init().
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a primitive mark-and-sweep-style garbage detector. The core is
in common/ for later use by subdaemons, but for now it's just lightningd.
We initialize it before most other allocations.
We walk the tal tree to get all the pointers, then search the `ld`
object for those pointers, recursing down. Some specific helpers are
required for hashtables (which stash bits in the unused pointer bits,
so won't be found).
There's `notleak()` for annotating things that aren't leaks: things
like globals and timers, and other semi-transients.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The filter is being populated while initializing the daemon and by
adding new keys as they are being generated. The filter is then used
in connect_block to identify transactions of interest.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Our testsuite uses --dev-fail-on-subdaemon-fail, so I didn't notice this
until I turned that off to chase a bug.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In future it will have TOR support, so the name will be awkward.
We collect the to/fromwire functions in common/wireaddr.c, and the
parsing functions in lightningd/netaddress.c.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a bit messier than I'd like, but we want to clearly remove all
dev code (not just have it uncalled), so we remove fields and functions
altogether rather than stub them out. This means we put #ifdefs in callers
in some places, but at least it's explicit.
We still run tests, but only a subset, and we run with NO_VALGRIND under
Travis to avoid increasing test times too much.
See-also: #176
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Makes it easier to compare before/after failures. Ideally, we should
run under Travis both with this option and with the seed based on the
entire tmp path (which is still reproducible with determination, but
not fixed every run like this is).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There are now only two kinds of subdaemons: global ones (hsmd, gossipd) and
per-peer ones. We can handle many callbacks internally now.
We can have a handler to set a new peer owner, and automatically do
the cleanup of the old one if necessary, since we now know which ones
are per-peer.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Now the flow is much simpler from a lightningd POV:
1. If we want to connect to a peer, just send gossipd `gossipctl_reach_peer`.
2. Every new peer, gossipd hands up to lightningd, with global/local features
and the peer fd and a gossip fd using `gossip_peer_connected`
3. If lightningd doesn't want it, it just hands the peerfd and global/local
features back to gossipd using `gossipctl_handle_peer`
4. If a peer sends a non-gossip msg (eg `open_channel`) the gossipd sends
it up using `gossip_peer_nongossip`.
5. If lightningd wants to fund a channel, it simply calls `release_channel`.
Notes:
* There's no more "unique_id": we use the peer id.
* For the moment, we don't ask gossipd when we're told to list peers, so
connected peers without a channel don't appear in the JSON getpeers API.
* We add a `gossipctl_peer_addrhint` for the moment, so you can connect to
a specific ip/port, but using other sources is a TODO.
* We now (correctly) only give up on reaching a peer after we exchange init
messages, which changes the test_disconnect case.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We pull them from the database on-demand, where we're storing them
anyway. No need to keep them in memory as well.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
So far we were tracking the status by including it either in the paid
or the unpaid list. This refactor makes the state explicit, which
matches the planned DB schema much better.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Some fields were redundant, some are simply moved into 'struct lightningd'.
All routines updated to hand 'struct lightningd *ld' now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Also, we split the more sophisticated json_add helpers to avoid pulling in
everything into lightning-cli, and unify the routines to print struct
short_channel_id (it's ':', not '/' too).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
To avoid everything pulling in HTLCs stuff to the opening daemon, we
split the channel and commit_tx routines into initial_channel and
initial_commit_tx (no HTLC support) and move full HTLC supporting versions
into channeld.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
When loading from DB the list of htlcs was not being initialized which
caused a segfault when the first commit came around, this fixes it.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
The peer->seed needs to be unique for each channel, since bitcoin
pubkeys and the shachain are generated from it. However we also need
to guarantee that the same seed is generated for a given channel every
time, e.g., upon a restart. The DB channel ID is guaranteed to be
unique, and will not change throughout the lifetime of a channel, so
we simply mix it in, instead of a separate increasing counter.
We also needed to make sure to store in the DB before deriving the
seed, in order to get an ID assigned by the DB.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This is the big one, and it's completely anticlimactic: it loads all
channels that have reached opening and are not marked as
closingd_complete into memory, that's it.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This is required for onchaind: we want to watch all descendents by default,
as to do otherwise would be racy, which means we need to traverse the outputs
when a tx appears.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Now we're always sync, just use an fd. Put the hsm_sync_read() helper
here, too, and do HSM init sync which makes things much simpler.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
They share some fields, but they're basically different, and it's clearest
to treat them differently in most places.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Since we have a simple way to query the database for UTXOs we can
simplify some of the coin selection logic. That gets rid of the
in-memory list of UTXOs.
Not the nicest code, but it allows us to store the bip32_max_index so
that we don't forget our addresses upon restart. We could have done
the same by retrieving the max index from our index, but then we'd
forget addresses that don't have an associated output. Conversion
to/from string is so that we can store arbitrary one off values in the
DB in the future, independent of type.
We use a file descriptor, so when we consume an entry, we move past it
(and everyone shares a file offset, so this works).
The file contains packet names prefixed by - (treat fd as closed when
we try to write this packet), + (write the packet then ensure the file
descriptor fails), or @ ("lose" the packet then ensure the file
descriptor fails).
The sync and async peer-write functions hook this in automatically.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Header from folded patch 'test-run-cryptomsg__fix_compilation.patch':
test/run-cryptomsg: fix compilation.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Adds a new command line flag `--dev-broadcast-interval=<ms>` that
allows us to specify how often the staggered broadcast should
trigger. The value is passed down to `gossipd` via an init message.
This is mainly useful for integration tests, since we do not want to
wait forever for gossip to propagate.
This lets us link HTLCs from one peer to another; but for the moment it
simply means we can adjust balance when an HTLC is fulfilled.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This uses a single fd for both status and control.
To make this work, we enforce the convention that replies are the same
as requests + 100, and that their name ends in "_REPLY".
This also means that various daemons can simply exit when done; there's
no race between reading request and closing status fds.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We use a different 'struct peer' in the new daemons, so make sure
the structure isn't assumed in any shared files.
This is a temporary shim.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Or for blackbox tests --gdb1=<subdaemon> / --gdb2=<subdaemon>.
This makes the subdaemon wait as soon as it's execed, so we can attach
the debugger.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
For the moment this is simply handed through to lightningd for
generating the per-peer secrets; eventually the HSM should keep it and
all peer secret key operations would be done via HSM-ops.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This used to be part of `lightningd_state` which is being split up for
the various subdaemons. The main change is the addition of the `struct
routing_state` in `routing.h` and the addition of `rstate` in `struct
lightningd_state` for backwards compatibility.
Now we hand peers off to the gossip daemon, to do the INIT handshake and
re-transmit/receive gossip. They may stay there forever if neither we nor
them wants to open a channel.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>