Update the address and direction as soon as it connects not just when
we're about to make it active: we want this even if we don't have
an active channel, or if the connect hook rejects it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is generally verboten now, since there can be multiple. There are a
few exceptions:
1. We sometimes want to know if there are *any* active channels.
2. Some dev commands still take peer id when they mean channel_id.
3. We still allow peer id when it's fully determined.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `close` by peer id will fail if there is more than one live channel (use `channel_id` or `short_channel_id` as id arg).
Sure, we want to connect (usually) because of an active channel, but
it's not specific to the channel itself.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Activate means a specific thing now (connectd said something), so avoid
confusing it with this function.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Generally this means converting a lazy "peer_active_channel(peer)" call
into an explicit iteration.
1. notify_feerate_change: call all channels (ignores non-active ones anyway).
2. peer_get_owning_subd remove unused function.
3. peer_connected hook: don't save channel, do lookup and iterate channels.
4. In json_setchannelfee "all" remove useless call to peer_active_channel
since we check state anyway, and iterate.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rather than intuiting whether this is a new channel / active channel,
use the channel_id. This simplifies things and makes them explicit,
and prepares for multiple live channels per peer.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Now we always have it (either extracted from an unsolicited message,
or told to us by lightningd when it tells us it wants to talk), we can
always send it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This means lightningd needs to create the temporary one and tell it to
openingd/dualopend, rather than the other way around.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We don't need to hand it to channeld: it will read it! We simply
need to tell it to expect it.
Similarly, openingd/dualopend will never see it, so remove that logic.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Either because lightningd tells us it wants to talk, or because the peer
says something about a channel.
We also introduce a behavior change: we disconnect after a failed open.
We might want to modify this later, but we it's a side-effect of openingd
not holding onto idle connections.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. The notification should be called every time.
2. channel can never be NULL, since it's tested above.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: JSON-RPC: `connect` notification now called even if we already have a live channel.
We currently intuit this by whether there's a subdaemon owning it.
But we're about to change the rules and allow connectd to hold idle
connections, so we need an explicit flag.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Suggested by @m-schmook, I realized that if we append it later I'll
never get it right: I expect parameters min and max, not max and min!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: you can now alter the `htlc_minimum_msat` and `htlc_maximum_msat` your node advertizes.
Based on setchannelfee, but expanded to allow setting max htlc amount (and others
in future?).
The main differences:
1. It doesn't change values which are not specified (that would be hard to
add fields to!)
2. It says exactly what all values are in any potentially changed channels.
Changelog-Added: JSON-RPC: new `setchannel` command generalizes `setchannelfee`.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is htlc_maximum_msat in BOLT 7 speak, but this name matches our existing
fields and is clearer in this context.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is the cheapest algo I came up with that simply checks that the
same `remote_addr` has been report by two different peers. Can be
improved in many ways:
- Check by connecting to a radonm peers in the network
- Check for more than two confirmations or a certain fraction
- ...
Changelog-Added: Send updated node_annoucement when two peers report the same remote_addr.
Instead of doing this weird chaining, just call them all at once and
use a reference counter.
To make it simpler, we return the subd_req so we can hang a destructor
off it which decrements after the request is complete.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Useful for accounting for missed/historical channel opens, to figure out
what the actual sat contribution from each peer is at a utxo level
Changelog-Added: JSONRPC: `listpeers` now includes a `pushed_msat` value. For leased channels, is the total lease_fee.
All build flags and (experimental) options make it hard to find
out what features are supported or enabled.
And the undocumented `--list-features-only`, does not account for all
our featurebits, for example bit 55 (keysend).
Changelog-Added: JSON-RPC: `getinfo` result now includes `our_features` (bits) for various Bolt #9 contexts
If we call update_channel_from_inflight *twice* with the same inflight, we
will get bad results. Using tal_steal() here was a premature optimization:
```
Valgrind error file: valgrind-errors.496395
==496395== Invalid read of size 8
==496395== at 0x22A9D3: to_tal_hdr (tal.c:174)
==496395== by 0x22B4B5: tal_steal_ (tal.c:498)
==496395== by 0x16A13D: update_channel_from_inflight (peer_control.c:1225)
==496395== by 0x16A4C7: funding_depth_cb (peer_control.c:1299)
==496395== by 0x182807: txw_fire (watch.c:232)
==496395== by 0x182AA9: watch_topology_changed (watch.c:300)
==496395== by 0x1290ED: updates_complete (chaintopology.c:624)
==496395== by 0x129BF4: get_new_block (chaintopology.c:835)
==496395== by 0x125EEF: getrawblockbyheight_callback (bitcoind.c:362)
==496395== by 0x176ECC: plugin_response_handle (plugin.c:584)
==496395== by 0x1770F5: plugin_read_json_one (plugin.c:690)
==496395== by 0x1772D9: plugin_read_json (plugin.c:735)
==496395== Address 0x89fbb08 is 24 bytes inside a block of size 104 free'd
==496395== at 0x483CA3F: free (in /usr/lib/x86_64-linux-gnu/valgrind/vgpreload_memcheck-amd64-linux.so)
==496395== by 0x22B193: del_tree (tal.c:421)
==496395== by 0x22B461: tal_free (tal.c:486)
==496395== by 0x16A123: update_channel_from_inflight (peer_control.c:1223)
==496395== by 0x16A4C7: funding_depth_cb (peer_control.c:1299)
==496395== by 0x182807: txw_fire (watch.c:232)
==496395== by 0x182AA9: watch_topology_changed (watch.c:300)
==496395== by 0x1290ED: updates_complete (chaintopology.c:624)
==496395== by 0x129BF4: get_new_block (chaintopology.c:835)
==496395== by 0x125EEF: getrawblockbyheight_callback (bitcoind.c:362)
==496395== by 0x176ECC: plugin_response_handle (plugin.c:584)
==496395== by 0x1770F5: plugin_read_json_one (plugin.c:690)
==496395== Block was alloc'd at
==496395== at 0x483B7F3: malloc (in /usr/lib/x86_64-linux-gnu/valgrind/vgpreload_memcheck-amd64-linux.so)
==496395== by 0x22AC1C: allocate (tal.c:250)
==496395== by 0x22B1DD: tal_alloc_ (tal.c:428)
==496395== by 0x22B3A6: tal_alloc_arr_ (tal.c:471)
==496395== by 0x22C094: tal_dup_ (tal.c:805)
==496395== by 0x12B274: new_inflight (channel.c:187)
==496395== by 0x136D4C: wallet_commit_channel (dual_open_control.c:1260)
==496395== by 0x13B084: handle_commit_received (dual_open_control.c:2839)
==496395== by 0x13B6AF: dual_opend_msg (dual_open_control.c:2976)
==496395== by 0x1809FF: sd_msg_read (subd.c:553)
==496395== by 0x218F5D: next_plan (io.c:59)
==496395== by 0x219B65: do_plan (io.c:407)
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is neater than what we had before, and slightly more general.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON_RPC: `sendcustommsg` now works with any connected peer, even when shutting down a channel.
It's weird to have connectd ask gossipd, when lightningd can just do it
and hand all the addresses together.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We now let gossipd do it.
This also means there's nothing left in 'struct per_peer_state' to
send across the wire (the fds are sent separately), so that gets
removed from wire messages too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We need to stash/save the amount of the lease fees on a leased channel,
we do this by re-using the 'push' amount field on channel (which is
technically correct, since we're essentially pushing the fee amount to
the peer).
Also updates a bit of how the pushes are accounted for (pushed to now
has an event; their channel will open at zero but then they'll
immediately register a push event).
Leases fees are treated exactly the same as pushes, except labeled
differently.
Required adding a 'lease_fee' field to the inflights so we keep track of
the fee for the lease until the open happens.
we used this originally to suppress duplicate issuance of coin-move
events; we're assuming that any plugin expects duplicate events though
(and knows how to de-dupe them), so we no longer need this logic.
And turn "" includes into full-path (which makes it easier to put
config.h first, and finds some cases check-includes.sh missed
previously).
config.h sets _GNU_SOURCE which really needs to be done before any
'#includes': we mainly got away with it with glibc, but other platforms
like Alpine may have stricter requirements.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
