This is a transitional patch so we can still close channels cleanly;
for want of a better option, I hooked it into --deprecated-apis.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We shouldn't fail negotiation just because they exceeded what we thought
fair: we're better off as long as it's actually <= final commitment fee.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We move it into jsonrpc where it belongs, and make it fail the command.
This means it can tell us exactly what was wrong.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This makes much more sense when you ask for a specific peer's log.
Also, we put the peerid rather than pid ().
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The JSON connect command wouldn't terminate if peer reconnected
in a state CHANNELD_AWAITING_LOCKIN or above.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We're going to have to support multiple channels per peer, even if only
when some are onchain. This would break the current listpeers, so
change it to an array (single element for now).
Other cleanups:
1. Only set connected true if daemon is not onchaind.
2. Only show netaddr if connected; don't make it an array, call it `address`
in comparison with `addresses` in listnodes.
3. Rename `channel` to `short_channel_id`
4. Add `funding_txid` field for voyeurism.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This, of course, should never be used. But it helps maintain connections
for the moment while we dig deeper into feerates.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Message buffer `why` is allocated in the `peer` context and also freed when peer is freed.
Only explicitly free the buffer when peer itself is not freed yet.
1. htlc->fail has been changed to a u8 *.
2. wallet_get_newindex saves to the db.
3. peer->next_htlc_id is saved to the db in peer_save_commitsig_sent() below.
4. We do store commit in peer_save_commitsig_received(peer, commitnum),
and the fixme below talks about HTLC sigs.
5. We do commit shachain and next_per_commit_point in wallet_shachain_add_hash
and update_per_commit_point respectively.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
All other users of json_get_params(...) check the return value:
```
lightningd/chaintopology.c: if (!json_get_params(buffer, params,
lightningd/chaintopology.c: if (!json_get_params(buffer, params,
lightningd/dev_ping.c: if (!json_get_params(buffer, params,
lightningd/gossip_control.c: if (!json_get_params(buffer, params,
lightningd/invoice.c: if (!json_get_params(buffer, params,
lightningd/invoice.c: if (!json_get_params(buffer, params,
lightningd/invoice.c: if (!json_get_params(buffer, params,
lightningd/invoice.c: if (!json_get_params(buffer, params,
lightningd/invoice.c: if (!json_get_params(buffer, params, "label", &labeltok, NULL)) {
lightningd/invoice.c: if (!json_get_params(buffer, params,
lightningd/jsonrpc.c: if (!json_get_params(buffer, params,
lightningd/pay.c: if (!json_get_params(buffer, params,
lightningd/pay.c: if (!json_get_params(buffer, params,
lightningd/peer_control.c: if (!json_get_params(buffer, params,
lightningd/peer_control.c: if (!json_get_params(buffer, params,
lightningd/peer_control.c: if (!json_get_params(buffer, params,
lightningd/peer_control.c: if (!json_get_params(buffer, params,
lightningd/peer_control.c: if (!json_get_params(buffer, params,
lightningd/peer_control.c: if (!json_get_params(buffer, params,
wallet/walletrpc.c: if (!json_get_params(buffer, params,
wallet/walletrpc.c: if (!json_get_params(buffer, params, "tx", &txtok, NULL)) {
```
This is the scriptpubkey that onchaind spends all funds to, except for
the their_unilateral/to-us case, so we better recognize that address.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This is the only case in which we don't respend to a simple keyindex'd
pubkey, so we need to handle this for future spends.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We always arm the funding_lockin_cb, even if we don't need to. If we
have an short_channel_id already from the db, this was replacing it
and leaking the old one.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is surprisingly simple. We set up the watches for funding tx
depth and the funding output, then if it's not onchain we ask gossipd
to reconnect.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Load the first block we're possibly interested in, then load the peers so
we can restore the tx watches, then finally replay to the current tip.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This gives us a lower bound on where funding tx could be.
In theory, it could be lower than this if we get a reorganization, but
in practice this is already a 1-block buffer (since we can't get into
current block, only the next one).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's just a sha256_double, but importantly when we convert it to a
string (in type_to_string, which is used in logging) we use
bitcoin_blkid_to_hex() so it's reversed as people expect.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's just a sha256_double, but importantly when we convert it to a
string (in type_to_string, which is used in logging) we use
bitcoin_txid_to_hex() so it's reversed as people expect.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Accuracy improvements:
1. We assumed the output was a p2wpkh, but it can be user-supplied now.
2. We assumed we always had change; remove this for wallet_select_all.
Calculation out-by-one fixes:
1. We need to add 1 byte (4 sipa) for the input count.
2. We need to add 1 byte (4 sipa) for the output count.
3. We need to add 1 byte (4 sipa) for the output script length for each output.
4. We need to add 1 byte (4 sipa) for the input script length for each input.
5. We need to add 1 byte (4 sipa) for the PUSH optcode for each P2SH input.
The results are now a slight overestimate (due to guessing 73 bytes
for signature, whereas they're 71 or 72 in practice).
Fixes: #458
Reported-by: Jonas Nick @jonasnick
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We can call this multiple times. The best solution is to add and remove
the signature so it's always unsigned as we expect it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
jsonrpc handlers usually directly call command_success or
command_fail; not doing that implies they're waiting for something
async.
Put an explicit call (currently a noop) there, and add debugging
checks to make sure it's used.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
When gossipd sends a message, have a gossip_index. When it gets back a
peer, the current gossip_index is included, so it can know exactly where
it's up to.
Most of this is mechanical plumbing through openingd, channeld and closingd,
even though openingd and closingd don't (currently) read gossip, so their
gossip_index will be unchanged.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
All peers come from gossipd, and maintain an fd to talk to it. Sometimes
we hand the peer back, but to avoid a race, we always recreated it.
The race was that a daemon closed the gossip_fd, which made gossipd
forget the peer, then master handed the peer back to gossipd. We stop
the race by never closing the gossipfd, but hand it back to gossipd
for closing.
Now gossipd has to accept two fds, but the handling of peers is far
clearer.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rather than using the destructor, hook up the cmd so we can close it.
peers are allocated off ld, so they are only destroyed explicitly.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Change all calls to use the correct serialization and deserialization
functions, include the correct headers and remove the control
messages.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We only send them when we're not awaiting revoke_and_ack: our
simplified handling can't deal with multiple in flights.
Closes: #244
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Depending on what we're doing, we can want different ones. So use
IMMEDIATE (estimatesmartfee 2 CONSERVATIVE), NORMAL (estimatesmartfee
4 ECONOMICAL) and SLOW (estimatesmartfee 100 ECONOMICAL).
If one isn't available, we try making each one half the previous.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Thought we don't handle it at the moment, nodes can certainly have multiple
addresses, and we should display them all.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We don't track them accurately when in onchaind, but we don't want to:
onchaind can be restarted at any time.
Once it's all settled, we're clear to clean them up.
Before this, valgrind could complain about deferncing hout->key.peer:
Valgrind error file: valgrind-errors.10876
==10876== Invalid read of size 4
==10876== at 0x41F8AF: peer_on_chain (peer_control.h:127)
==10876== by 0x42340D: notify_new_block (peer_htlcs.c:1461)
==10876== by 0x40A08D: connect_block (chaintopology.c:96)
==10876== by 0x40A96B: topology_changed (chaintopology.c:313)
==10876== by 0x40AC85: add_block (chaintopology.c:384)
==10876== by 0x40ABF0: gather_previous_blocks (chaintopology.c:363)
==10876== by 0x4051B3: process_rawblock (bitcoind.c:410)
==10876== by 0x4044DD: bcli_finished (bitcoind.c:155)
==10876== by 0x454665: destroy_conn (poll.c:183)
==10876== by 0x454685: destroy_conn_close_fd (poll.c:189)
==10876== by 0x45DF89: notify (tal.c:240)
==10876== by 0x45E43A: del_tree (tal.c:400)
==10876== Address 0x6929208 is 2,120 bytes inside a block of size 2,416 free'd
==10876== at 0x4C2EDEB: free (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==10876== by 0x45E513: del_tree (tal.c:421)
==10876== by 0x45E849: tal_free (tal.c:509)
==10876== by 0x41A8E9: handle_irrevocably_resolved (peer_control.c:1172)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
These need to be different for testing the example in BOLT 11.
We also use the cltv_final instead of deadline_blocks in the final hop:
various tests assumed 5 was OK, so we tweak utils.py.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Normally, we get an error as soon as we send WIRE_REVOKE_AND_ACK. But if the
commit timer goes off, we get some extra cycles, during which the other side
can reconnect. In this case, we simply kill the channeld before it fails,
and never check for the permfail string.
b'lightning_channeld(18613): TRACE: dev_disconnect: -WIRE_REVOKE_AND_ACK'
b'lightning_channeld(18613): TRACE: Trying commit'
b'lightning_channeld(18613): TRACE: htlc 0: SENT_ADD_REVOCATION->SENT_ADD_ACK_COMMIT'
b'lightning_channeld(18613): TRACE: htlc added REMOTE: local +0 remote -200000000'
b'lightning_channeld(18613): TRACE: sending_commit: HTLC REMOTE 0 = SENT_ADD_ACK_COMMIT/RCVD_ADD_ACK_COMMIT'
b'lightning_gossipd(18590): TRACE: Responder: Act 1'
b'lightning_channeld(18613): TRACE: Derived key 034aab0b5cb755de836cffb34c053ba115fba6fe75414e8f56261e23c80eabb1fe from basepoint 03e0a7bb422b254f54bc954be05bd6823a7b7a4b996ff8d3079ca211590fb5df39, point 02f3bf525b6ca595bf85d63e89c95fc59c0fde3ae434b55c8093bbb5c64849da37'
b'lightningd(18465): Connected json input'
b'lightningd(18465):jcon fd 16: Success'
b'lightningd(18465):jcon fd 16: Closing (Bad file descriptor)'
b'lightning_gossipd(18590): TRACE: Responder: Act 2'
b'lightning_gossipd(18590): TRACE: Responder: Act 3'
b'lightning_gossipd(18590): UPDATE WIRE_GOSSIP_PEER_CONNECTED'
b'lightning_gossipd(18590): UPDATE WIRE_GOSSIP_PEER_CONNECTED'
b'lightningd(18465): peer 0266e4598d1d3c415f572a8488830b60f7e744ed9235eb0b1ba93283b315c03518: Peer has reconnected, state CHANNELD_NORMAL'
b'lightning_channeld(18613): Status closed, but not exited. Killing'
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And we report these through the getpeers JSON RPC again (carefully: in
our reconnect tests we can get duplicates which this patch now filters
out).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In future it will have TOR support, so the name will be awkward.
We collect the to/fromwire functions in common/wireaddr.c, and the
parsing functions in lightningd/netaddress.c.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a bit messier than I'd like, but we want to clearly remove all
dev code (not just have it uncalled), so we remove fields and functions
altogether rather than stub them out. This means we put #ifdefs in callers
in some places, but at least it's explicit.
We still run tests, but only a subset, and we run with NO_VALGRIND under
Travis to avoid increasing test times too much.
See-also: #176
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
test_routing_gossip (__main__.LightningDTests) ... lightningd: Outstanding taken pointers: lightningd/peer_control.c:2352:towire_errorfmt(ld, ((void *)0), "Can't resolve your address")
This caused by the other end closing due to the next bug.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There is a race we see sometimes under valgrind on Travis which shows
gossipd receiving the node_announce from master before it reads the
channel_announce from channeld, and thus fails. The simplest solution
is to send the channel_announce and channel_update to master as well,
so it can ensure it sends them to gossipd in order
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There are now only two kinds of subdaemons: global ones (hsmd, gossipd) and
per-peer ones. We can handle many callbacks internally now.
We can have a handler to set a new peer owner, and automatically do
the cleanup of the old one if necessary, since we now know which ones
are per-peer.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We currently rely on a zero exit status. That's the only difference between
onchain finished handling and other per-peer daemons, so instead we should
have an explicit "done" message. This is both clearer, and allows us to
unify.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Now the flow is much simpler from a lightningd POV:
1. If we want to connect to a peer, just send gossipd `gossipctl_reach_peer`.
2. Every new peer, gossipd hands up to lightningd, with global/local features
and the peer fd and a gossip fd using `gossip_peer_connected`
3. If lightningd doesn't want it, it just hands the peerfd and global/local
features back to gossipd using `gossipctl_handle_peer`
4. If a peer sends a non-gossip msg (eg `open_channel`) the gossipd sends
it up using `gossip_peer_nongossip`.
5. If lightningd wants to fund a channel, it simply calls `release_channel`.
Notes:
* There's no more "unique_id": we use the peer id.
* For the moment, we don't ask gossipd when we're told to list peers, so
connected peers without a channel don't appear in the JSON getpeers API.
* We add a `gossipctl_peer_addrhint` for the moment, so you can connect to
a specific ip/port, but using other sources is a TODO.
* We now (correctly) only give up on reaching a peer after we exchange init
messages, which changes the test_disconnect case.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We're going to make the ip/port optional, so they should go at the end.
In addition, using ip:port is nicer, for gethostbyaddr().
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We have to do a dance when we get a reconnect in openingd, because we
don't normally expect to free both owner and peer. It's a layering
violation: freeing a peer should clean up the owner's pointer to it,
to avoid a double free, and we can eliminate this dance.
The free order is now different, and the test_reconnect_openingd was
overprecise.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This fixes the only case where the master currently has to write directly
to the peer: re-sending an error. We make gossipd do it, by adding
a new gossipctl_fail_peer message.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We pull them from the database on-demand, where we're storing them
anyway. No need to keep them in memory as well.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
No idea why we were iterating over the list of stubs and then passing
in the index instead of a pointer to the stub directly.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This wires in the loading of `struct htlc_stub`s on-demand when
starting `onchaind` so that we don't need to keep them in memory.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
peer_fail_permanent() frees peer->owner, but for bad_peer() we're
being called by the sd->badpeercb(), which then goes on to
io_close(conn) which is a child of sd.
We need to detach the two for this case, so neither tries to free the
other.
This leads to a corner case when the subd exits after the peer is gone:
subd->peer is NULL, so we have to handle that too.
Fixes: #282
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We have a race where we start onchaind, but state is unchanged, so checks
like peer_control.c's:
peer_ready = (peer->owner && peer->state == CHANNELD_AWAITING_LOCKIN);
if (!peer_ready) {
log_unusual(peer->log,
"Funding tx confirmed, but peer state %s %s",
peer_state_name(peer->state),
peer->owner ? peer->owner->name : "unowned");
} else {
subd_send_msg(peer->owner,
take(towire_channel_funding_locked(peer,
peer->scid)));
}
Can send to the wrong daemon.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We re-use the value for reasonable_depth given by the master, and we
tell it when our timeout transactions reach that depth.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
When we see an offered HTLC onchain, we need to use the preimage if we
know it. So we dump all the known HTLC preimages at startup, and send
new ones as we discover them.
This doesn't cover preimages we know because we're the final
recipient; that can happen if an HTLC hasn't been irrevocably
committed yet. We'll do that in a followup patch.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If the HSM is slow it might happen that the timestamp has changed the
second time we come around, so we generate the timestamp externally
and pass it in so we're sure it won't change between calls.
Reported-by: Rusty Russell
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This change is really to allow us to have a --dev-fail-on-subdaemon-fail option
so we can handle failures from subdaemons generically.
It also neatens handling so we can have an explicit callback for "peer
did something wrong" (which matters if we want to close the channel in
that case).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is the step where we broadcast the transaction to the network and
a nice place to extract the change from the transaction.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
So far we were always using the deadline in the announcements, that's
obviously not good, so this introduces the parameter as per spec.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We weren't killing it. Eventually it would die, and peer_owner_finished()
would access subd->peer->owner, but that peer was freed already.
Closes: #261
Reported-by: Christian Decker <decker.christian@gmail.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
To reproduce the next bug, I had to ensure that one node keeps thinking it's
disconnected, then the other node reconnects, then the first node realizes
it's disconnected.
This code does that, adding a '0' dev-disconnect modifier. That means
we fork off a process which (due to pipebuf) will accept a little
data, but when the dev_disconnect file is truncated (a hacky, but
effective, signalling mechanism) will exit, as if the socket finally
realized it's not connected any more.
The python tests hang waiting for the daemon to terminate if you leave
the blackhole around; to give a clue as to what's happening in this
case I moved the log dump to before killing the daemon.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In this case, we unset the old subd->peer, then freed subd.
peer_owner_finished dereferenced subd->peer->owner, and boom:
test_disconnect_funder (__main__.LightningDTests) ... Fatal signal 11. Log dumped in crash.log
------------------------------- Valgrind errors --------------------------------
Valgrind error file: valgrind-errors.2882
==2882== Invalid read of size 8
==2882== at 0x413F74: peer_owner_finished (peer_control.c:679)
==2882== by 0x41EA2C: destroy_subd (subd.c:381)
==2882== by 0x459700: notify (tal.c:240)
==2882== by 0x459BB1: del_tree (tal.c:400)
==2882== by 0x459FC0: tal_free (tal.c:509)
==2882== by 0x413796: peer_reconnected (peer_control.c:493)
==2882== by 0x413A6A: add_peer (peer_control.c:592)
==2882== by 0x40ED1F: handshake_succeeded (new_connection.c:186)
==2882== by 0x41E3DD: sd_msg_reply (subd.c:262)
==2882== by 0x41E6BB: sd_msg_read (subd.c:318)
==2882== by 0x41E4E6: read_fds (subd.c:283)
==2882== by 0x44DEB4: next_plan (io.c:59)
==2882== Address 0x838 is not stack'd, malloc'd or (recently) free'd
==2882==
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The logic of dispatching the announcement_signatures message was
distributed over several places and daemons. This aims to simplify it
by moving it all into `channeld`, making peer_control only report
announcement depth to `channeld`, which then takes care of the
rest. We also do not reuse the funding_locked tx watcher since it is
easier to just fire off a new watcher with the specific purpose of
waiting for the announcement_depth.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
