is_local, ie. "is this side of the channel ours?" is not needed since we
can determine that predicate by evaluating
`scidd->dir == node_id_idx(self, peer)`
Add spendable/receivable and is_local fields to the callback function
used in gossmods_from_listpeerchannels. This allows to do more fine
grained use of the listpeerchannels call.
The first use case is renepay, for which we need to ignore the htlc_max
of the local channels only.
It's a u64, we should pass by copy. This is a big sweeping change,
but mainly mechanical (change one, compile, fix breakage, repeat).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This has the benefit of being shorter, as well as more reliable (you
will get a link error if we can't print it, not a runtime one!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Set up a simple line of channel pairs, where one should be preferred
over the other for our various reasons. Make sure this works, both
using a low-level call to Dijkstra and at a higher level as the pay
plugin does.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I noticed that run-route-infloop chose some worse-looking paths after
routing was fixed, eg the second node:
Before:
Destination node, success, probability, hops, fees, cltv, scid...
02b3aa1e4ed31be83cca4bd367b2c01e39502cb25e282a9b4520ad376a1ba0a01a,1,0.991856,2,1004,40,2572260x39x0/1,2131897x45x0/0
After:
Destination node, success, probability, hops, fees, cltv, scid...
02b3aa1e4ed31be83cca4bd367b2c01e39502cb25e282a9b4520ad376a1ba0a01a,1,0.954540,3,1046,46,2570715x21x0/1,2346882x26x14/1,2131897x45x0/0
This is because although the final costs don't reflect it, routing was taking
into account local channels, and 2572260x39x0/1 has a base fee of 2970.
There's an easy fix: when we the pay plugin creates localmods for our
gossip graph, add all local channels with delay and fees equal to 0.
We do the same thing in our unit test. This improves things across
the board:
Linear success probability (when found): min-max(mean +/- stddev)
Before: 0.487040-0.999543(0.952548+/-0.075)
After: 0.486985-0.999750(0.975978+/-0.053)
Hops:
Before: 1-5(2.98374+/-0.77)
After: 1-5(2.09593+/-0.63)
Fees:
Before: 0-50848(922.457+/-2.7e+03)
After: 0-50041(861.621+/-2.7e+03)
Delay (blocks):
Before: 0-196(65.8081+/-60)
After: 0-190(60.3285+/-60)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Plugins: `pay` route algorithm doesn't bias against our own "expensive" channels any more.
Avoids a gratuitous "ctx" field, and the simplified declaration
is now understood by `make update-mocks`.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Update the lightningd <-> channeld interface with lots of new commands to needed to facilitate spicing.
Implement the channeld splicing protocol leveraging the interactivetx protocol.
Implement lightningd’s channel_control to support channeld in its splicing efforts.
Changelog-Added: Added the features to enable splicing & resizing of active channels.
Update gossip routiens and various other hecks on the channel state to consider AWAITING_SPLICE to be routable and treated similar to CHANNELD_NORMAL.
Small updates to psbt interface
Changelog-None
It's actually two separate u16 fields, so actually treat it as
such!
Cleans up zombie handling code a bit too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
```
make check-source-bolt CHECK_BOLT_PREFIX="--prefix=BOLT-route-blinding" BOLTVERSION=guilt/offers
```
Other than textual changes, this does:
1. Ensures we put total_amount_msat in onion final hop (reported by @t-bast).
2. Require that they put total_amount_msat in onion final hop.
3. Return `invalid_onion_blinding` exactly as defined by the spec (i.e. less
aggressive when we're the final hop) (also reported by @t-bast, but I already
knew).
See: #5823
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: `offers` breaking blinded payments change (total_amount_sat required, Eclair compat)
Don't parse the listpeers.channels output ourselves: with two extra fields
we can simply reuse json_to_listpeers_channels().
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Instead of returning a peers -> channels heirarchy, return (as callers
want!) a flat array of channels.
This is actually most of the transition work to make them work with
listpeerchannels.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We change the libplugin API so commando can provide its own ID base.
This id chaining enables much nicer diagnostics!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We simply take the first one, and route to the start of that. Then we
append the blinded path to the onion construction.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We will now simply reject old-style ones as invalid. Turns out the
only trace we could find is a channel between two nodes unconnected to
the rest of the network.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Protocol: We now require all channel_update messages include htlc_maximum_msat (as per latest BOLTs)
Many changes to gossmap (including the pending ones!) don't actually
concern readers, as long as they obey certain rules:
1. Ignore unknown messages.
2. Treat all 16 upper bits of length as flags, ignore unknown ones.
So now we split the version byte into MAJOR and MINOR, and you can
ignore MINOR changes.
We don't expose the internal version (for creating the map)
programmatically: you should really hardcode what major version you
understand!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Connectd already does this when we *receive* an error or warning, but
now do it on send. This causes some slight behavior change: we don't
disconnect when we close a channel, for example (our behaviour here
has been inconsistent across versions, depending on the code).
When connectd is told to disconnect, it now does so immediately, and
doesn't wait for subds to drain etc. That simplifies the manual
disconnect case, which now cleans up as it would from any other
disconnection when connectd says it's disconnected.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We had json_add_amount_msat_only(), which was designed to be used to
print out msat fields, if we had sats.
However, we misused it, so split it into the three different cases:
1. json_add_amount_sat_msat: We are using it correctly, with a field called
xxx_msat.
2. json_add_amount_sats_deprecated: We were using it wrong, so deprecate
the old field and create a new one which does end in _msat.
3. json_add_sats: we were using it to hand sats as a JSON parameter to an
interface, where "XXXsat".
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: Plugins: `rbf_channel` and `openchannel2` hooks `their_funding` (use `their_funding_msat`)
Changelog-Deprecated: Plugins: `openchannel2` hook `dust_limit_satoshis` (use `dust_limit_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `funding_satoshis` (use `funding_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `dust_limit_satoshis` (use `dust_limit_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `channel_reserve_satoshis` (use `channel_reserve_msat`)
Changelog-Deprecated: Plugins: `channel_opened` notification `amount` (use `funding_msat`)
Changelog-Deprecated: JSON-RPC: `listtransactions` `msat` (use `amount_msat`)
Changelog-Deprecated: Plugins: `htlc_accepted` `forward_amount` (use `forward_msat`)
Per BIP-0171, the signature map is of pubkey to "The signature as would
be pushed to the stack from a scriptSig or witness".
Fixes 5298
Changelog-Fixed: PSBT: Fix signature encoding to comply with BIP-0171.
Signed-off-by: Jon Griffiths <jon_p_griffiths@yahoo.com>
connectd is going to end up using this do demux; make it fast and complete.
Fixing this reveals a problem in openingd: it now extracts the channel_id
from funding_signed (which is where we transition off the temporary), and
gets upset. So fix that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And turn "" includes into full-path (which makes it easier to put
config.h first, and finds some cases check-includes.sh missed
previously).
config.h sets _GNU_SOURCE which really needs to be done before any
'#includes': we mainly got away with it with glibc, but other platforms
like Alpine may have stricter requirements.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Various unit tests were creating temporary files unconditionally in /tmp
and were not cleaning up after themselves. Introduce a new variant of
mkstemp(3p) that respects the TMPDIR environment variable, and use it in
the offending unit tests. This allows each test run to use a dedicated
TMPDIR that can be cleaned up after the run.
Changelog-None
Signed-off-by: Matt Whitlock <c-lightning@mattwhitlock.name>
We bias by channel linearly by capacity, scaled by median fee.
This means that we effectively double the fee if we would use the
entire capacity, and only increase it by 50% if we would only use
1/2 the capacity.
This should drive us towards larger channels.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Plugins: `pay` now biases towards larger channels, improving success probability.
Before:
Ten builds, laptop -j5, no ccache:
```
real 0m36.686000-38.956000(38.608+/-0.65)s
user 2m32.864000-42.253000(40.7545+/-2.7)s
sys 0m16.618000-18.316000(17.8531+/-0.48)s
```
Ten builds, laptop -j5, ccache (warm):
```
real 0m8.212000-8.577000(8.39989+/-0.13)s
user 0m12.731000-13.212000(12.9751+/-0.17)s
sys 0m3.697000-3.902000(3.83722+/-0.064)s
```
After:
Ten builds, laptop -j5, no ccache: 8% faster
```
real 0m33.802000-35.773000(35.468+/-0.54)s
user 2m19.073000-27.754000(26.2542+/-2.3)s
sys 0m15.784000-17.173000(16.7165+/-0.37)s
```
Ten builds, laptop -j5, ccache (warm): 1% faster
```
real 0m8.200000-8.485000(8.30138+/-0.097)s
user 0m12.485000-13.100000(12.7344+/-0.19)s
sys 0m3.702000-3.889000(3.78787+/-0.056)s
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
When a request comes through, we forward it over to the funder who
uses the currently set policy to figure out how to handle it.
Includes small update to the policy engine which decides whether or not
to fund a request.
Changelog-Experimental: Plugins: `openchannel2` hook now includes optional fields for a channel lease request
