1. onion-message
2. blinded-payments
3. route-blinding
4. channel-type
5. warnings.
Now they'll be checked correctly, and if the spec changes, we'll know
to reexamine this code.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Apparently VLS actually does something when we preapprove: if caller is just
checking we want to tell it not to do that!
I put in a flag so we can test both old and new APIs.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This should make VLS's life easier: they can ignore dev flags they
don't understand, but we will know their capabilites after init and so
know what they didn't understand (if required).
The only flag for now is a flag to force failure for "preapprove" calls.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Now we can check that the setconfig would actually parse. We do this
by handing NULL to the calback to indicate it's a test, which may not
work in general but works for now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: `check` `setconfig` now checks that the new config setting would be valid.
We want to extend it to plugins, and we want it to be allowed to be async for more power,
so rather than not completing the cmd if we're checking, do it in command_check_done()
and call it.
This is cleaner than the special case we had before, and allows check to us all the
normal jsonrpc mechanisms, especially async requests (which we'll need if we want to
hand check requests to plugins!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
is_local, ie. "is this side of the channel ours?" is not needed since we
can determine that predicate by evaluating
`scidd->dir == node_id_idx(self, peer)`
Add spendable/receivable and is_local fields to the callback function
used in gossmods_from_listpeerchannels. This allows to do more fine
grained use of the listpeerchannels call.
The first use case is renepay, for which we need to ignore the htlc_max
of the local channels only.
It's a u64, we should pass by copy. This is a big sweeping change,
but mainly mechanical (change one, compile, fix breakage, repeat).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This has the benefit of being shorter, as well as more reliable (you
will get a link error if we can't print it, not a runtime one!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We have various functions to convert to a string, rename them all so we can
count on fmt_X being the formatter for struct X, and make them all return
`char *`.
Sometimes they existed but were private, sometimes they had a
different name. Most take a pointer, but simple types pass by copy:
short_channel_id, amount_msat and amount_sat.
The following public functions changed:
1. psbt_to_b64 -> fmt_wally_psbt.
2. pubkey_to_hexstr -> fmt_pubkey.
3. short_channel_id_to_str -> fmt_short_channel_id (scid by copy now!)
4. fmt_signature -> fmt_secp256k1_ecdsa_signature
5. fmt_amount_sat/fmt_amount_msat pass copy not pointer, return non-const char *.
6. node_id_to_hexstr -> fmt_node_id
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We do this for DEBUG_SUBD already, but I wanted to debug the main lightningd.
(We rename --debugger to the more accurate --dev-debug-self)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Standardizes the is_xxx script function all take a script length, and changes
their first-level callers to pass it. This has several knock on benefits:
- We remove the repeated tal_count/tal_bytelen calls on the script, in
particular the redundant calls that result when we must check for multiple
types of script - which is almost all cases.
- We remove the dependency on the memory being tal-allocated (It is, in
all cases, but theres no reason we need to require that).
- We remove all cases where we create a copy of the script just to id it.
- We remove all allocations for non-interesting scripts while iterating block
txs in process_getfilteredblock_step1().
- We remove all allocations *including for potentially interesting scripts* in
topo_add_utxos().
Signed-off-by: Jon Griffiths <jon_p_griffiths@yahoo.com>
Set up a simple line of channel pairs, where one should be preferred
over the other for our various reasons. Make sure this works, both
using a low-level call to Dijkstra and at a higher level as the pay
plugin does.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I noticed that run-route-infloop chose some worse-looking paths after
routing was fixed, eg the second node:
Before:
Destination node, success, probability, hops, fees, cltv, scid...
02b3aa1e4ed31be83cca4bd367b2c01e39502cb25e282a9b4520ad376a1ba0a01a,1,0.991856,2,1004,40,2572260x39x0/1,2131897x45x0/0
After:
Destination node, success, probability, hops, fees, cltv, scid...
02b3aa1e4ed31be83cca4bd367b2c01e39502cb25e282a9b4520ad376a1ba0a01a,1,0.954540,3,1046,46,2570715x21x0/1,2346882x26x14/1,2131897x45x0/0
This is because although the final costs don't reflect it, routing was taking
into account local channels, and 2572260x39x0/1 has a base fee of 2970.
There's an easy fix: when we the pay plugin creates localmods for our
gossip graph, add all local channels with delay and fees equal to 0.
We do the same thing in our unit test. This improves things across
the board:
Linear success probability (when found): min-max(mean +/- stddev)
Before: 0.487040-0.999543(0.952548+/-0.075)
After: 0.486985-0.999750(0.975978+/-0.053)
Hops:
Before: 1-5(2.98374+/-0.77)
After: 1-5(2.09593+/-0.63)
Fees:
Before: 0-50848(922.457+/-2.7e+03)
After: 0-50041(861.621+/-2.7e+03)
Delay (blocks):
Before: 0-196(65.8081+/-60)
After: 0-190(60.3285+/-60)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Plugins: `pay` route algorithm doesn't bias against our own "expensive" channels any more.
The "path_score" callback was supposed to evaluate the *entire path*,
but that was counter-intuitive and opened the door to a cost function
bug which caused this path cost to be less than the closer path.
In particular, the capacity bias code didn't understand this at all.
1. Rename the function to `channel_score` and remove the "distance"
parameter (always "1" since you're supposed to be evaluating a
single hop).
2. Rename "cost" to the more specific "fee": "score" is our
actual cost function result (we avoid the word "cost" as it
may get confused with satoshi amounts).
3. For capacity biassing, we do want to know the amount, but
explicitly hand that as a separate parameter "total".
4. Fix a minor bug where total handed to scoring function previously
included channel fee (this is wrong: fee is paid before sending into
channel).
5. Remove the now-unused total_delay member from the dijkstra
struct.
Here are the results of our test now (routing 4194303 msat, which
didn't crash the old code, so we could compare). In both cases
we could find routes to 615 nodes:
Linear success probability (when found): min-max(mean +/- stddev)
Before: 0.484764-0.999750(0.9781+/-0.049)
After: 0.487040-0.999543(0.952548+/-0.075)
Hops:
Before: 1-5(2.13821+/-0.66)
After: 1-5(2.98374+/-0.77)
Fees:
Before: 0-50041(2173.75+/-5.3e+03)
After: 0-50848(922.457+/-2.7e+03)
Delay (blocks):
Before: 0-294(83.1642+/-68)
After: 0-196(65.8081+/-60)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: https://github.com/ElementsProject/lightning/issues/7092
Changelog-Fixed: Plugins: `pay` would occasionally crash on routing.
Changelog-Fixed: Plugins: `pay` route algorithm fixed and refined to balance fees and capacity far better.
The amount is set not to crash by default, but run
"common/test/run-route-infloop 8388607" and you'll see a crash.
Sorry about the 7MB blob, but this testing was quite revealing and
I consider it worth adding.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Wrote a test program which passed num_channel_updates_rejected as NULL
(which we don't usually do), and valgrind complained:
```
==1048302== Conditional jump or move depends on uninitialised value(s)
==1048302== at 0x118B90: update_channel (gossmap.c:550)
==1048302== by 0x119EEE: map_catchup (gossmap.c:663)
==1048302== by 0x11A299: load_gossip_store (gossmap.c:726)
==1048302== by 0x11A352: gossmap_load (gossmap.c:1052)
==1048302== by 0x125362: main (run-route-infloop.c:90)
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Thanks to amazing debugging assistance from grubles, we figured out
that indeed, my memory was correct: write and mmap are not consistent
on all platforms. The easiest fix is to disable mmap on OpenBSD for now:
the better fix is to do in-place updates using the mmap, and only rely
on write() for append (which always causes a remap anyway before it's accessed).
Fixes: https://github.com/ElementsProject/lightning/issues/7109
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Increasing the min version of the hsmd due that we
added new code that required the hsmd to sign an announcements.
One of the solution is to increase the min version in this way
a signer like VLS fails directly during the init phase.
Link: https://github.com/ElementsProject/lightning/issues/7074
Changelog-None: hsmd: increase the min version
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
We weakened this progressively over time, and gossip v1.5 makes spam
impossible by protocol, so we can wait until then.
Removing this code simplifies things a great deal!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Removed: Protocol: we no longer ratelimit gossip messages by channel, making our code far simpler.
We never enabled it, because we seemed to be eliminating valid
channels. We discard zombie-marked records on loading.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In particular, allow callers to see unknown records we ignore (and let
them fail as a result), and get called if we can't pack a
channel_update into our internal format.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The only way you'll see private channel_updates is if you put them
there yourself with localmods.
I also renamed the confusing gossmap_chan_capacity to gossmap_chan_has_capacity.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Before this it was channeld doing it, which was tied to a particular
channel. Create an API for lightningd to sign for any channel.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And add a request schema for multifundchannel.
Changelog-Added: JSON-RPC: `fundchannel` and `multifundchannel` now take an optional `channel_type` parameter.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We use an array of bit numbers. We could use an array of names, but the JSON typing is then harder.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
